Toyota Tundra Truck Bed Sliding Tray

Hi Bob, The BedSlide Factory Mount Installation Kit for BedSlide S and Classic part #BE69WR is intended for a 2015-2016 Ford F150 so it won't fit your 2026 F150. I checked the BedSlide website, and they currently don't list any fits for…

Hey Lorie, the first thing you need is a BedSlide confirmed to fit your 2021 Chevy Silverado 2500 6-3/4 foot bed like the #BE75ER. Then for everything else you'd want the Complete BedBin kit part #BE94WR. I attached a picture of everything that…

Hey Scott, the correct factory mount install kit for a BedSlide for a 2026 GMC Sierra 3500 would be the part #BE45UV. Do you have a BedSlide already?

Hi Richard; BedSlide does not make a mounting kit that can attach to the puck system in trucks. The only option is the Factory Mount Installation Kit for BedSlide S and Classic like #BE69WR that uses the factory tie-down points. This is designed for…

The BedSlide Sliding Truck Bed Tray #BE35WR can be installed with a factory spray in bed liner. If your 2019 Ford F-150 with the 6-1/2' bed is using a plastic liner I recommend removing it to have a spray in liner put in before mounting the Bed…

Hi Kristian, great question! The etrailer Anti-Rattle Hitch Collar, part #e55YV, works by taking the slack out between your hitch receiver and the shank of your ball mount or hitch-mounted accessory. It clamps around the outside lip of your 2-1/2…

Hey Mike, congratulations on the new truck! You can definitely use the two together. The Curt StowPro 2-Ball Mount #C34FR53HY uses a standard 2-1/2" shank, making it a great match for our etrailer Anti-Rattle Hitch Collar #e55YV. It installs…

Hey Scott! The etrailer Anti-Rattle Hitch Collar #e55YV is rated for up to 10,000 lbs gross trailer weight and won't reduce the capacity of a properly matched towing setup. As always, your actual towing capacity is determined by the lowest-rated…

Hey Greg! The etrailer Anti-Rattle Hitch Collar for 2.5" Hitch Receivers #e55YV is not compatible with a weight distribution hitch. This is really the only restriction for our anti-rattle. If you need an anti-rattle for a weight distribution…

Good question, Aaron. Since your main detail is the GM MultiPro tailgate, I’d be careful here. The B&W Tow & Stow for 2-1/2" receivers #BWTS20066BMP is specifically listed as compatible with the GM MultiPro tailgate, so if tailgate…

Hi Roy, Yes, the 30 Amp Portable Power Watchdog #HU32VR will protect your RV from sustained low voltage as well as power spikes and high voltage. If the incoming voltage drops to 104 volts or below, or climbs to 132 volts or higher, the watchdog face…

Since you have the Thule TracRac SR #TH97RV on your 2021 Toyota Tundra you will need a tonneau cover that installs inside the bed rails. For a folding cover I recommend the BAKFlip MX4 #BAK48409T. If you would prefer a roll up cover then I would…