Is etrailer Anti-Rattle Hitch Collar Compatible With Curt StowPro 2-Ball Mount

Question

Question:

Can I use this anti-rattle with the Curt StowPro 2-Ball Mount? I recently upgraded to a truck with a factory 2-1/2" receiver and I'm replacing my old ball mount. Before I order the anti-rattle collar I wanted to confirm compatibility, thanks.

asked by: Mike R

0

Expert Reply:

Hey Mike, congratulations on the new truck! You can definitely use the two together. The Curt StowPro 2-Ball Mount # C34FR53HY uses a standard 2-1/2" shank, making it a great match for our etrailer Anti-Rattle Hitch Collar # e55YV. It installs directly onto the receiver and helps eliminate the movement between the hitch and ball mount that causes rattling and clunking.

What kind of truck did you get and what are you towing?

expert reply by: Robin H

0

etrailer Anti-Rattle Hitch Collar
(click to enlarge)

Mike

7/28/2026

Thanks! 2026 Sierra. Looking forward to adding this to my setup. I tow a variety of things, primarily our travel trailer.

Robin H.

7/28/2026

@Mike you're welcome! This is going to be a great addition to your setup for sure. If you need anything else don't hesitate to reach out.

Answer 1

Hi Kristian, great question! The etrailer Anti-Rattle Hitch Collar, part #e55YV, works by taking the slack out between your hitch receiver and the shank of your ball mount or hitch-mounted accessory. It clamps around the outside lip of your 2-1/2…

view full answer...

Answer 2

Hey Scott! The etrailer Anti-Rattle Hitch Collar #e55YV is rated for up to 10,000 lbs gross trailer weight and won't reduce the capacity of a properly matched towing setup. As always, your actual towing capacity is determined by the lowest-rated…

view full answer...

Answer 3

Hey Greg! The etrailer Anti-Rattle Hitch Collar for 2.5" Hitch Receivers #e55YV is not compatible with a weight distribution hitch. This is really the only restriction for our anti-rattle. If you need an anti-rattle for a weight distribution…

view full answer...

Answer 4

Hey Jack! The Big Truck Big RV Trailer Jack Foot Scale #BTBRV014 has a +/- 5% full scale accuracy and displays weight in 50-lb increments up to 2,000 lbs.. It provides a quick and reliable way to verify your trailer's tongue weight before towing.…

view full answer...

Answer 5

Hey John! Yes, it will. The CURT Adjustable 2-Ball Mount #C34FR33HY has a 2-1/2" shank, so it works directly with the etrailer Anti-Rattle Hitch Collar #e55YV. The collar helps take the play out between the receiver and ball mount for a quieter,…

view full answer...

Answer 6

Hey Melissa! A cargo net is definitely a good idea when you're carrying a lot of gear like that. The Benton HotMesh Cargo Net #B32FR is going to be the best option since its specifically designed to fit a 24" x 60" like the Benton…

view full answer...

Answer 7

Hey Chris! It sure will. The B&W Ball Mount #BW77BR uses a 2-1/2" shank, so it's fully compatible with our etrailer Anti-Rattle Hitch Collar #e55YV. This works with pretty much any 2-1/2" or 2" ball mount/accessory, with the…

view full answer...

Answer 8

Hey Jason! You can definitely use the two together. The etrailer Anti-Rattle Hitch Collar #e38FV installs at the hitch receiver. The alignment collar on the Benton MoveHitch #B86VR and #B38VR (with cargo net) just helps you line it up with the hitch…

view full answer...

Answer 9

Hey Philip! The difference between the TST TPMS for RVs #TST-507-RV-6-C and #TST-507-FT-6-C you looked at is the sensors. The #TST-507-RV-6-C has cap sensors and then the #TST-507-FT-6-C uses the flow through sensors. The 770 series like #TST94VR has…

view full answer...

Answer 10

Hey Dan! Yes, the BTBRV Trailer Jack Foot Scale #BTBRV014 comes with the carrying case pictured below. It is not designed to remain installed on the trailer while you're driving. We include the case to keep it protected while it is stored in your…

view full answer...

Answer 11

Hey Wayne! For that kind of garage setup, I’d look at the etrailer Sidewind Aluminum Jack with Wheel - Swivel Bolt - 1.5K #e95YV. It gives you the wheel you need for nudging the tongue around by hand, but it also includes a 19mm socket so you can…

view full answer...

Answer 12

Good morning Steve! For a boat trailer jack where you still want a wheel, I’d use the etrailer Sidewind Aluminum Jack with Wheel - Swivel Bolt - 1.5K #e95YV. That one gives you a 1,500 lb capacity, 12" of travel, and a built-in wheel so you can…

view full answer...

Is etrailer Anti-Rattle Hitch Collar Compatible With Curt StowPro 2-Ball Mount

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching