Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Dan, I'm happy to help! For a 3500 lb axle and a 5 on 4-1/2" bolt pattern, you can use the CE Smith Trailer Hub Assembly #CE13511 which is pre-greased with a carrying case if you don't need the galvanized option or the EZ Lube…
view full answer...According to information we have looked at in the past, the Shorelander SS734 fits the same dimensions as the standard #84 spindle. With this being the case I recommend using the Easy Grease Trailer Idler Hub Assembly #AKIHUB-545-35-EZ-K for your…
view full answer...Hey, Kevin. I'm not 100% sure what you mean by better but we do have double lip seals that will work for you. Part #RG06-010 match up to the 1.250" inner and 1.979" outer diameter that you are needing. The thickness of the seal…
view full answer...The CE Smith Trailer Hub Assembly #CE13511 does use the same Inner Bearing #L68149 and Outer Bearing #L44649 as the ShoreLand'r Hub 4470400. This will work as a replacement for your ShoreLand'r model 2016 LUXR2314S7MH.
view full answer...For a Lippert 4,400 lb trailer axle the correct bearing kit is the part #BK2-100 which includes inner bearing #L68149, inner race #L68111, outer bearing #L44649, outer race #L44610, grease seal #58846, a cotter pin and a tang washer.
view full answer...There is a little bit of information from Kodiak brakes that has some tests that I will link you to separately. We do consider Kodiak to be top-notch and for a 3,500 lb idler hub, I recommend the following braking system: - Kodiak Disc Brake Kit -…
view full answer...You are correct, the bolts for the mounting bracket are not included with the Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs #K2R35DKG. What you need is the Brake Mounting Bolt for 7" and 10" Brake…
view full answer...Hey Weston, a little play is normal for the most part as long as it's in and out. If the play is in basically any other direction that indicates a worn out bearing. In and out play can simply be that the spindle nut needs a little more tightening…
view full answer...Grease Seal #RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.
view full answer...The Dexter 8-283 is an obsolete 2800lb 10 x 1-1/2 inch hub that used a LM67048 inner and a L44649 outer bearing. Unfortunately, we don't have any hubs that would be compatible with the spindles on your axle. Your best bet at this point would be…
view full answer...Based on my research, the etrailer.com Electric Trailer Brake Kit #AKEBRK-2 referenced in your question will indeed be the correct assemblies to replace the brakes for your AL-KO 8440 hubs. These are 7 inch x 1-1/4 inch brake assemblies and are…
view full answer...Hey Dave, For your application I recommend picking up the Timken Replacement Bearing and Race Set - L44649 and L44610 #TMK23VR, and the Timken Grease and Oil Seal #TMK48ZR. We don't have a kit that has all of these parts together, which is why I…
view full answer...
Filters
