Replacement for Hub to Fit with Shorelander SS734 Bearing Kit

Updated 01/05/2022 | Published 01/04/2022

Question:

I have a Shorelander PWC Trailer and I am looking to get a Hub Assembly. The one recommended by Shorelander is SS734. I will also need this part Spindle Sleeve - 1 3/8-1 1/16 Shorelander SS734 1-3/8 Inch x 1-1/16 Inch Hub And Bearing Kit What do you have as a direct replacement?

asked by: Thomas S

Expert Reply:

According to information we have looked at in the past, the Shorelander SS734 fits the same dimensions as the standard #84 spindle. With this being the case I recommend using the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-EZ-K for your application. This comes pre-greased so you won't have to pack it (although it's always best to double check that the grease is in there properly) and a 5 on 4-1/2" bolt pattern. It also includes 2 different grease caps for whether you have the EZ Lube spindle or the standard spindle.

I have attached an installation video for you to check out as well. We don't carry those spindle sleeves so you'll need to source those elsewhere (I would check with Shorelander).

expert reply by: Jon G