bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 4 on 4 Inch
  4. For 2000 lbs Axles
  5. Hub
  6. Easy Grease
  7. EZ Lube
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized

Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized

Item # AKIHUB-440-2-G-EZ-2K
lowest price pledge
Our Price: $34.99
Trailer Hubs and Drums
Orders above $99 qualify for Free Shipping
Shipping Weight: 6 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included. Lowest Prices for the best trailer hubs and drums from etrailer. Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized part number AKIHUB-440-2-G-EZ-2K can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (5)
  • Q & A (0)
  • Photos
  • Why etrailer?

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-440-2-G-EZ-2K

  • 4 on 4 Inch
  • For 2000 lbs Axles
  • Hub
  • Easy Grease
  • EZ Lube
  • 8 Inch Wheel
  • 10 Inch Wheel
  • 12 Inch Wheel
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 1/2 Inch Stud
  • L44649
  • L44649
  • etrailer

Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.


Features:

  • Marine-grade trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Galvanized finish offers excellent corrosion resistance
    • Ideal for use on a boat or snowmobile trailer
  • QAI and CSA certified


Specs:

  • Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BTR spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 8" to 14"
  • Bolt pattern: 4 on 4"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.99"
  • Weight capacity: 1,000 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L44649 (1.063" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L44610
    • Outer race: L44610
  • Grease seal (included): 10-9
    • Inner diameter: 1.50"
    • Outer diameter: 1.987"

E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication

The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


H-100-97 AxleTek Trailer Idler Hub Assembly for 2K Axle with Hardware - 4 on 4 - Galvanized - EZ Lube






Customer Reviews

Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized - AKIHUB-440-2-G-EZ-2K

Average Customer Rating:  5.0 out of 5 stars   (5 Customer Reviews)

Marine-grade hub is designed for trailer idler axles. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.

- AKIHUB-440-2-G-EZ-2K
by:

great product



- AKIHUB-440-2-G-EZ-2K
by:

The person in customer service knew exactly what I needed. The hub is a perfect match for the ones currently in use on my trailer. I carry this one as a spare, and see no reason to doubt that it will work perfectly when needed. Ordering was a breeze and I had it in no time. Thanks for great service!



- AKIHUB-440-2-G-EZ-2K
by:

Perfect, everything fit!



- AKIHUB-440-2-G-EZ-2K
by:

perfect fit, remember the rear seal goes flush with the hub any further and it will bind the rear bearing. the front does not have a seal just a washer and castle nut.



- AKIHUB-440-2-G-EZ-2K
by:

Great customer service


5
5

Ask the Experts about this etrailer Trailer Hubs and Drums



  • Idler Hubs to Replace Brake Drums on a Viking Pop-Up Camper with Dexter 8-173 Hubs
    Your Viking Pop-up actually has a torsion axle, most likely a #9 based on the hub group of your trailer. You can replace those brake hubs with idler hubs, no problem! You can use idler hub # AKIHUB-440-2-2K. That is unless there are grease fittings at the ends of the axle. If that is the case you would need # AKIHUB-440-2-G-EZ-2K. Both of the hubs above use bearing L44649 as the inner and outer bearing which is correct according to the specs on the 8-173 hubs from Dexter. Still I do recommend...
    view full answer...
    Image 1 for
  • Replacement Galvanized 4 on 4 Hub with 1.249 ID Grease Seal
    It sounds like you might be looking for the # AKIHUB-440-2-G-EZ-1K which uses a grease seal with a 1.249" ID. However, you will want to confirm that the bearings match as well. The AKIHUB-440-2-G-EZ-1K uses the inner and outer bearing # L44643 which is a 1" inner diameter bearing. As long as those also match, this will be the correct hub you're looking for and is compatible with EZ lube axles like yours. If you find a different bearing in the hubs, just let me know what you've got and...
    view full answer...
  • Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
    I looked up the information on your TDE 46205 Hubs and found a couple of great replacements for you. The one you pick will depend on the number of wheel studs you have. For 5 wheel studs use the etrailer Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized part # AKIHUB-545-2-G-EZ-2K For 4 wheel studs use the etrailer Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - Galvanized part # AKIHUB-440-2-G-EZ-2K These are designed for the straight...
    view full answer...
  • Recommended Trailer Hubs with 4 on 4 Inch Bolt Pattern for CE Smith Trailer Axle Beam CE33201GA
    The correct trailer hub with 4 on 4" bolt pattern to use with the CE Smith Trailer Axle Beam part # CE33201GA is the Trailer Idler Hub Assembly part # AKIHUB-440-2-G-EZ-2K. The spring seats can then be moved in 1/4" on each side to match your 47" spring center spacing. The Trailer Idler Hub Assembly part # AKIHUB-440-2-G-2K will work but you would want to use the above E-Z Lube option instead as that is what the axle has.
    view full answer...
  • Replacement Hub For A 60's Trailer That Are 4 on 4 With 1.060 Inner Bearings And .750 Outer Bearings
    Our closest hub is Item # AKIHUB-440-2-G-EZ-2K and it requires the 1.063" inner and outer bearings which is not compatible. We do not offer a hub that is going to fit a 1.060 inner bearing and .750 outer bearing. If you cannot locate a correct replacement it may require replacing the axle. I have included a link for the 2000 lb axles if you need to go that route.
    view full answer...
  • Replacement Parts Needed To Convert Wheel Style Trailer Hub With Idler Hub On Homemade Boat Trailer
    To be able to install a different hub you will need to replace your spindles. The BTR E-Z Lube Spindle # TRU44FR as a 1-1/4" shaft that is designed to be welded inside your current axle tube. If your axle tube has a different inner dimension let me know and I can help you find the right one. This new spindle will get you common size bearings allowing for you to change hub styles and a E-Z lube grease zerk to ensure that your bearings are filled. You will be able to mount a 4 on 4" Hub...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Replacement Idler Hub Assembly for Lowe 16 Foot Boat Trailer
    Based on your inner and outer bearing being the L44649 bearing, the Trailer Hub Assembly # 8-258-50UC1-EZ will work well for you. You will want to confirm that your existing hubs have a 5 on 4-1/2 inch wheel bolt pattern. I was unable to find any information with the 6289103 number you provided. The galvanized hub assembly I recommend is the Trailer Idler Hub Assembly # AKIHUB-545-2-G-EZ-2K. If you do not have an EZ lube axle, you can use # AKIHUB-545-2-G-2K. If your hubs have a 4 on...
    view full answer...
  • Replacement Option for Axle With Metric Spindles for Haul Master Trailer
    Unfortunately, we don't carry a replacement axle that's compatible with metric hubs, but we do offer options that would get your trailer back on the road. We do offer hubs compatible with the # CE33201GA axle. For a 5 on 4-1/2 inch bolt pattern, I'd recommend going with part # AKIHUB-545-2-LFEZ-2K or for a 4 on 4 bolt pattern, use # AKIHUB-440-2-EZ-2K. If you'd prefer galvanized hubs for greater corrosion resistance, use # AKIHUB-545-2-G-EZ-2K for a 5 on 4-1/2 inch bolt pattern or # AKIHUB-440-2-G-EZ-2K...
    view full answer...
  • Replacement Trailer Hub for Seadoo Trailer 4 on 4 Bolt Pattern
    There are 3 possible hubs for your trailer. To determine the correct hub you will need to remove one of the hubs it check for the correct bearing/spindle size. If you can read the numbers on the bearing you are looking for L44643 or L44649. If unable to read bearing numbers you can measure the spindle with a Digital Caliper # PTW80157. 1" Spindle(L44643) - # AKIHUB-440-2-G-1K for non EZ Lube Axle - # AKIHUB-440-2-G-EZ-1K for EZ Lube Axle 1.063" Spindle (L44649) - # AKIHUB-440-2-G-2K...
    view full answer...
  • How to Choose Correct Replacement Hubs for Boat Trailer with 2,200 lb Axle
    To ensure that you get the correct replacement hub assembly you need to check the part numbers on your bearings and your grease seal. If you pull the hub you should find them stamped right on the bearings and seal themselves. Luckily trailer axles have become more standardized in the recent past so I can tell you that they should be # L44649 bearings and your seal should be a 10-9 (with an inner diameter of 1.50"). If this is the case then I recommend going with galvanized hubs as they...
    view full answer...
    Image 1 for
  • Recommended Hubs with 4 on 4 Bolt Pattern and Double Lip Seal for CE Smith 1.8K Trailer Axle Beam
    The CE Smith Trailer Axle Beam part # CE33201GA has EZ-Lube Spindles so you will want to use the Trailer Idler Hub Assembly part # AKIHUB-440-2-G-EZ-2K instead which will then work with the 10-60 Grease Seal part # RG06-020.
    view full answer...
  • Recommended Galvanized Hubs Assemblies With 4 Bolts For Boat Trailer
    Since you have the spindles with the zerk on the end, I recommend the EZ lube that you mentioned because it is designed to give you easy access to that zerk by removing the plug and not the entire cap. For this assembly, you will want the Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - Galvanized # AKIHUB-440-2-G-EZ-2K. If you really don't want the EZ lube access, you can use the AKIHUB-440-2-G-2K with the solid caps. We don't have any assemblies already grease packed...
    view full answer...
  • Compatible Spindle for 2K Idler Hub with 4 on 4 Bolt Pattern
    We do offer a 4 on 4 hub and a compatible spindle, but they're sold separately and not as a kit. The # AKIHUB-440-2-G-EZ-2K 2000 lb capacity idler hub you'd looked at would be compatible with a BTR E-Z Lube spindle, part # TRU44FR. The hub includes the bearings, races, grease seal, E-Z Lube compatible dust cap and lug nuts. The # TRU44FR spindle includes the castle nut, tang washer and the D-washer.
    view full answer...
  • Correct 4 Lug Hub for EZ Lube Spindle 1.25 RD STUB
    Yes, the Trailer Idler Hub Assembly part # AKIHUB-440-2-G-EZ-2K is a match for the BTR E-Z Lube Spindle for 2,000-lb Trailer Axles part # TRU94FR. The bearings and seal are all a match so you will be good to go. There is also a rubber plug in the grease cap for the zerk fitting on the spindle so again, all is good.
    view full answer...
  • Replacement Galvanized Square Tube Axle for 2008 SeaLion Boat Trailer
    We have something extremely close that will work for you. It is the CE Smith Trailer Axle Beam with EZ-Lube Standard Spindles - Galvanized - 57-1/2" Long - 1.8K # CE33201GA. It has the hub-face-to-hub-face length of 57-1/2 inches and the spring-center-to-spring-center length of 46-1/2 inches with the overall beam length of 62 inches. The only thing that you will need to change is the spring centers which is just a drilled hole for the square axles. There will be a difference with the...
    view full answer...
    Image 1 for

Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Alexander C
Written by:
Alexander C
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.