bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 4 on 4 Inch
  4. For 2000 lbs Axles
  5. Hub
  6. 8 Inch Wheel
  7. 10 Inch Wheel
  8. 12 Inch Wheel
  9. 13 Inch Wheel
  10. 14 Inch Wheel
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized

Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized

Item # AKIHUB-440-2-G-2K
Our Price: $39.22
Trailer Hubs and Drums
Shipping Weight: 6 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant. Great Prices for the best trailer hubs and drums from etrailer. Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized part number AKIHUB-440-2-G-2K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (38)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-440-2-G-2K

  • 4 on 4 Inch
  • For 2000 lbs Axles
  • Hub
  • 8 Inch Wheel
  • 10 Inch Wheel
  • 12 Inch Wheel
  • 13 Inch Wheel
  • 14 Inch Wheel
  • Standard
  • 1/2 Inch Stud
  • L44649
  • L44649
  • etrailer

Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant.


Features:

  • Marine-grade trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Sturdy iron construction
  • Galvanized finish offers excellent corrosion resistance
    • Ideal for use on a boat or snowmobile trailer
  • QAI and CSA certified


Specs:

  • Application: 2,000-lb trailer axles with BTR spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 8" to 14"
  • Bolt pattern: 4 on 4"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.988"
  • Weight capacity: 1,000 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L44649 (1.063" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L44610
    • Outer race: L44610
  • Grease seal (included): 10-9
    • Inner diameter: 1.50"
    • Outer diameter: 1.987"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


H-100-97 AxleTek Trailer Idler Hub Assembly for 2K Axle with Hardware - 4 on 4 - Galvanized





Customer Satisfaction Score:


Customer Reviews

Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized - AKIHUB-440-2-G-2K

Average Customer Rating:  4.8 out of 5 stars   (38 Customer Reviews)

Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Galvanized finish is rust resistant.

by:

I took on a project to revive an older double jet ski trailer. The Wheels, hubs and springs all needed replacing
Searching online etrailer.com had all the parts I needed to rebuild the hubs and install new wheels. These parts are good quality and perform well. I will be returning to purchase from etailer.com again.



by:

The tire, hubs and envelopes of bearings where in a large box together with a little paper stuffing. The hubs moved around and damaged 2 of the bearing roller rings. Very disappointing! Other than that Im pleased with the products.

Etrailer Expert

Jenny N.

8/7/2023

We want you to have undamaged bearings. I will have our Customer Service team reach out to you.

Brian

8/14/2023

I was contacted and send the replacement bearings. I will continue to purchase from etrailer. Thank you!



by:

etrailer is awesome. Good pricing and excellent customer service. I received the wrong bearings, called customer service and the correct bearing were expedited that day. Can't ask for more than that.

Steve

7/23/2023

All is well. No problems so far.



by:

Bought a trailer for my fishing kayak and unfortunately, the tires (and hubs) that came with it were not rated to highway use. I had a trip coming up that was several hundred miles of highway away. Ordered these hubs and they came very quickly, went on as easy as the old ones came off. I’ve pulled the trailer for around 2000 miles and everything is tight with no play. Very happy.



by:

Replaced a year ago, no problems at all still going strong. Will get these for my other trailer soon.



by:

It fit perfect and is like new again. My old ones were pretty rusty and the bearing were destroyed from previous owner. Just need to get marine bearing grease, new cotter pin and washer.



by:

I bought a small trailer and made the mistake of not thoroughly inspecting and greasing the hubs before using it. A couple weeks later, a hub completely failed on the highway, and the internal bearings had been ground into powder. I limped home and promptly replaced both hubs with these from etrailer. The video and instructions made installation much easier, and I had both done in a couple hours (I'm not a mechanic). I upgraded the supplied outer cap with the corresponding Bearing Buddy, and this is a HUGE, very worthwhile upgrade. Etrailer should link the two together as a package! I now easily check and fill the grease every time I use it, and the hubs have been excellent. They were a great value and overall great product, and a year after purchase, they are running strong! Highly recommend.



by:

Great quality. Great replacement for cracked hub on my trailer.



by:

This is a great quality product. Prior to installation I didn't have to use wheel chocks because of gritty bearings. After installation my bearings were nicely greased making the trailer roll easy. Plus the support provided by the technical staff and the website made specification and installation very easy. Sandy J went out of her way to answer all my questions and ensure I had the best product for my application.



by:

Been in use for a year and work perfect ly.



by:

I ordered the wrong hubs at first because I made a poor assumption about my spindles. I was able to get good information both from their FAQs and from a customer service rep. I took their suggestion on the correct sized hubs and the new ones arrived a few days later. The bearings fit perfectly. Sold the wrong hubs on craigslist super fast because it would have cost too much to send them back. Thanks again for the support and accurate information!

Will W.

4/2/2018

I drove the trailer from RI to Maine and back last year and the hubs were great! Cant wait for this upcoming season.



by:

Always great to order parts from etrailer, the staff knows what they are doing, and the parts arrived so fast. Pricing is fair, thank you for the good service.



by:

Needed bearings for a boat trailer. For just a little more than the cost of getting bearings locally I got all new bearings and upgraded to galvanized hubs...which is a big plus for a trailer consistently backed into the water. A year later they look like new after washed.



by:

The hub,bearing and seal assembly appear to be good quality. I had a very difficult time installing the bearing buddy assembly to the hub requiring file fitting to make it work. I had to use a larger hammer than usual to drive them in.



by:

Everything works great, good quality parts, even great customer service when I received a couple bad bearings due to ups not being careful they where on it and got replacements no problem. Recommend these hubs and business for all trailer needs



by:

Excellent product. Great customer service. I needed two additional bearings and e-trailer staff was prompt in shipping the item. I am a repeat customer and will continue to buy frome-trailer.



by:

These were purchased for my utility trailer and will only experience water during a rain. Being galvanized will certainly help with rust prevention and I went one step farther by cleaning with acetone and spraying with a good silver paint. The kit wa complete and I hand packed the bearings with Amsoil synthetic grease for less maintenance and longer bearing life. I did not use the Chinese bearing that come with it and purchased Timken bearings. In my opinion the Timken products are superior and can be trusted. They look great, fit properly, no issues, doubt I will ever have to replace again in the future.



by:

Finished the trailer and drove from Chicago to North Carolina with a loaded trailer and no problems.



by:

YOUR SERVICE WAS EXCELLENT YOUR PRODUCTS FIT AND PERFORMED WELL .AND AT HALF THE PRICE THAT I NORMALLY PAY. NOT TO MENTIONSPEAKING WITH A REAL PERSON WHO ANSWERED MY QUESTIONS AND HELPED TO RECOMEND THE PARTS NEEDED TO FIT MY NEEDS . YOUR MY PARTS SOURCE IN THE FUTURE. THANKS!



by:

Good information and selection, very fair pricing, excellent assistance, prompt shipping. Far easier and better than driving to town and chasing down parts.



by:

Ordered new axel and hubs to replace my bent axel on older utility trailer. Instructions for ordering the correct parts was clear and easy. It was shipped the same day as ordered. Arrived in record time in great condition. Good quality. Perfect fit.

William

3/13/2021

Worked well. Have put on many miles without problems.



by:

Always have what I need and super fast shipping!



by:

Hubs fit on my 2007 Magic Tilt Trailer. Good service and delivery time.



by:

Excellent hub for my boat trailer



by:

Not pretty, but good enough.

Ted R.

9/16/2019

They will get the job done. They are on a light duty trailer for kayaks. I wanted to use 12 inch aluminum wheels on the hubs and found that the wheels would not fit the hubs with the center caps in the wheels. The wheels fit fine without the center caps and they look good enough for me. so no problem. FYI only.


25
38
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums

  • How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
    The best way to select a new hub is to match it based on the bearing set used in the original part. New hubs must use the same bearings as your old ones in order for them to fit on your spindles, so if you can find the part numbers from your inner and outer bearings you'll be most of the way toward knowing the right replacement hubs. Please refer to the linked photo that shows the usual placement and appearance of bearing part numbers. With those part numbers you can directly search on...
    view full answer...
    Image 1 for
  • Is AxleTek Idler Hub Available Without The Race
    The # AKIHUB-440-2-G-2K idler hub is a casting that has a machine finish. This 2,000 lb hub has a galvanized finish and has a 4 on 4 wheel bolt pattern. This hub comes with the race already pressed in place and the bearings, seal, grease cap and lug nuts included. We do not carry the hub as a separate item.
    view full answer...
  • Correct Replacement Idler Hub for Trailer with L44643 Bearings and 4 Bolt Pattern
    The correct idler hub assembly you're looking for is the Trailer Idler Hub Assembly part # AKIHUB-440-2-G-EZ-1K. This is a complete unit with bearings, races, and seals. They are made of steel with a galvanized finish. I am not aware of any such aluminum idler hub.
    view full answer...
  • Determining BT8 or BTR Spindle on Trailer
    The easiest way will be to pull off a trailer wheel and hub and then use a caliper like # PTW80157 to measure the spindle diameter where the bearings ride. If the diameter is .99 then you have the BT8 spindle or if it's 1.06 you have the BTR. The trailer hub # AKIHUB-440-2-G-2K you referenced would be what you'd need if you have the BT8. If instead you have the BTR you'd want the part # AKIHUB-440-2-2K.
    view full answer...
  • 4 On 4" Lug Pattern Idler Hubs Galvanized That Use L44643 Bearings For 2,000LB Boat Trailer Axle
    You are needing our Trailer Idler Hub Assembly # AKIHUB-440-2-G-1K. It is identical to the Trailer Idler Hub Assembly # AKIHUB-440-2-G-2K that you have on hold only it has the # L44643 Bearings that you need.
    view full answer...
  • Replacement 4-1/4 Long Idler Hub with 1 Bearings and 1.5 Grease Seal
    We do have a replacement for you with the Trailer Idler Hub Assembly # AKIHUB-440-2-G-2K. This uses inner and outer bearing # L44649 which has a 1.063" inner diameter and then a grease seal with a 1.50" inner diameter like you mentioned. From the 4 bolts in the background I'm guessing you have a 4 on 4" bolt pattern just like this hub has. The only difference is that it looks like you put bolts through your hub each time whereas this idler hub already has bolts installed. This means that...
    view full answer...
    Image 1 for Image 2 for
  • What is the Difference Between Trailer Hubs # AKIHUB-440-2-G-1K and # AKIHUB-440-2-G-2K
    The two hubs you mentioned, # AKIHUB-440-2-G-1K and # AKIHUB-440-2-G-2K fit different spindles. More specifically they use different bearings and seals. First, hub # AKIHUB-440-2-G-1K uses L44643, with a 1 inch inner diameter, as the inner and outer bearing, and the seal is a 34823, which has an inner diameter of 1.249 inches and outer diameter of 1.983 inches. Based on your information this sounds like the correct replacement. Check your old bearing numbers or you can take measurements...
    view full answer...
    Image 1 for
  • Recommended Trailer Hubs with 4 on 4 Inch Bolt Pattern for CE Smith Trailer Axle Beam CE33201GA
    The correct trailer hub with 4 on 4" bolt pattern to use with the CE Smith Trailer Axle Beam part # CE33201GA is the Trailer Idler Hub Assembly part # AKIHUB-440-2-G-EZ-2K. The spring seats can then be moved in 1/4" on each side to match your 47" spring center spacing. The Trailer Idler Hub Assembly part # AKIHUB-440-2-G-2K will work but you would want to use the above E-Z Lube option instead as that is what the axle has.
    view full answer...
  • Recommended Hub for a Boat Trailer w/ L44649 Inner and Outer Bearings
    The bearings that go on a 1.06" spindle are item # L44649. These are found in this configuration on 2,000 lbs - 2,700 lbs axles. If you can find it there is typically an axle tag or engraving somewhere on the axle that'll have a serial number or even the capacity on it. To replace the hub you will need one of the following depending on your bolt pattern: 4 on 4 - Galvanized - item # AKIHUB-440-2-G-2K 5 on 4-1/2 - Galvanized - Item # CE13315 Feel free to email me back with any additional...
    view full answer...
  • Recommended Replacement Hubs for a Tiedown 11029 Boat Trailer
    Yes, we do have a couple of idler hubs that fit the item # L44649 inner and outer bearings on your Venture boat trailer. They come in two different lug pattern sizes and are designed specifically for boat trailers. I couldn't get any information off of that part number so thank you for including the bearing sizes. I have listed both of our options below: 5 on 4-1/2 Lug Pattern - Trailer Idler Hub Assembly for 2,000-lb Axles item # AKIHUB-545-2-G-2K 4 on 4 Lug Pattern - Trailer Idler Hub...
    view full answer...
  • How to Determine Which Replacement Hubs for a 2000 Flying Scot Trailex Boat Trailer
    Unfortunately, we aren't able to look up the hubs used by a particular make and model trailer, although I sure wish would could as it would make life a lot easier! The good news is that it's pretty simple to determine which hubs you need. The easiest way to determine which replacement hubs would be needed would be to pull one of the hubs and get the reference number engraved/stamped/etched onto the side of the cages that hold the roller bearings. For a smaller trailer like yours, you...
    view full answer...
  • Recommended Galvanized Hubs Assemblies With 4 Bolts For Boat Trailer
    Since you have the spindles with the zerk on the end, I recommend the EZ lube that you mentioned because it is designed to give you easy access to that zerk by removing the plug and not the entire cap. For this assembly, you will want the Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - Galvanized # AKIHUB-440-2-G-EZ-2K. If you really don't want the EZ lube access, you can use the AKIHUB-440-2-G-2K with the solid caps. We don't have any assemblies already grease packed...
    view full answer...
  • How to Determine Correct Hub For Trailer
    I can tell you how to determine if a hub will fit your trailer, but we don't have any way of knowing if the one you asked about will fit a Right-On dolly trailer. First, you need to know the weight rating of your axle, and also what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to...
    view full answer...
    Image 1 for
  • Will Idler Hub AKIHUB-440-2-G-2K Fit on 1-Inch Spindle
    Yes, the hub you referenced, part # AKIHUB-440-2-G-2K, will fit on a 1-inch spindle since its included inner and outer bearing, part # L44649, has an inner diameter of 1.063-inches.
    view full answer...
  • Replacement Trailer Hub for Seadoo Trailer 4 on 4 Bolt Pattern
    There are 3 possible hubs for your trailer. To determine the correct hub you will need to remove one of the hubs it check for the correct bearing/spindle size. If you can read the numbers on the bearing you are looking for L44643 or L44649. If unable to read bearing numbers you can measure the spindle with a Digital Caliper # PTW80157. 1" Spindle(L44643) - # AKIHUB-440-2-G-1K for non EZ Lube Axle - # AKIHUB-440-2-G-EZ-1K for EZ Lube Axle 1.063" Spindle (L44649) - # AKIHUB-440-2-G-2K...
    view full answer...
  • Replacement Idler Hub Assembly for Lowe 16 Foot Boat Trailer
    Based on your inner and outer bearing being the L44649 bearing, the Trailer Hub Assembly # 8-258-50UC1-EZ will work well for you. You will want to confirm that your existing hubs have a 5 on 4-1/2 inch wheel bolt pattern. I was unable to find any information with the 6289103 number you provided. The galvanized hub assembly I recommend is the Trailer Idler Hub Assembly # AKIHUB-545-2-G-EZ-2K. If you do not have an EZ lube axle, you can use # AKIHUB-545-2-G-2K. If your hubs have a 4 on...
    view full answer...
  • How to Choose Correct Replacement Hubs for Boat Trailer with 2,200 lb Axle
    To ensure that you get the correct replacement hub assembly you need to check the part numbers on your bearings and your grease seal. If you pull the hub you should find them stamped right on the bearings and seal themselves. Luckily trailer axles have become more standardized in the recent past so I can tell you that they should be # L44649 bearings and your seal should be a 10-9 (with an inner diameter of 1.50"). If this is the case then I recommend going with galvanized hubs as they...
    view full answer...
    Image 1 for
  • What axles go with these hubs and were do I measure old axle
    I have a solution for you. However, none of the single straight axles that we carry have any of the measurements that you have included. Our axle's mountings were wider than the 57 inches listed for the frame rails. An option that you might consider is the Timbren Axle-Less Trailer Suspension, like # A20RS4400. This axle-less system has a weight capacity of 2000 lbs and will include 4 bolt hubs with axles. This system does not use a leaf spring suspension, but a rubber AEON spring that...
    view full answer...
  • Replacement Hubs for Boat Trailer With L44649 Inner and Outer Bearings
    So you need a hub with # L44649 inner and outer bearings along with a # 10-9 grease seal. We have the following options available that come with the bearings and seal: -Trailer Idler Hub Assembly for 2K Axles - 4 on 4 # AKIHUB-440-2-EZ-2K -Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 # AKIHUB-545-2-LF-2K -Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized # AKIHUB-440-2-G-2K -Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-2-G-2K You...
    view full answer...
  • Depth Measurement For Hubs That Fit A 1" Straight Spindle
    We do have hubs available for a 1" straight spindle in part # AKIHUB-440-2-EZ-1K. This hub measures 4-1/4" deep so it will run a bit longer than the hub you are looking for. There are a total of 4 hubs that we carry for a 1" straight spindle and all 4 would be identical as far as depth. A lot of these older boat trailers use hubs that are trailer specific, and it may prove very difficult to find. We do carry replacement spindles like part # TRU59FR, if you want to change it out for a more...
    view full answer...
  • Trailer Wheel Hub to Match 2,200 Pound Lippert Spindle
    We do carry the hubs and bearings that fit spindle # LC142161. The bearing kit is part # BK1-150 which uses # L44649 for both the inner and outer bearings. The hubs that fit come in either a 4 on 4 bolt pattern, like idler hub # AKIHUB-440-2-2K, or 5 on 4-1/2 bolt pattern, like part # AKIHUB-545-2-2K. We also have the same hubs galvanized; part # AKIHUB-440-2-G-2K for the 4 on 4 and part # AKIHUB-545-2-G-2K for the 5 on 4-1/2. There's also a hub and drum that fits if you need brakes...
    view full answer...
  • Recommended Hubs with 4 on 4 Bolt Pattern and Double Lip Seal for CE Smith 1.8K Trailer Axle Beam
    The CE Smith Trailer Axle Beam part # CE33201GA has EZ-Lube Spindles so you will want to use the Trailer Idler Hub Assembly part # AKIHUB-440-2-G-EZ-2K instead which will then work with the 10-60 Grease Seal part # RG06-020.
    view full answer...
  • Trailer Idler Hub Assembly For a 1" Diameter Spindle That is 4-1/4" Long
    It sounds like you are needing the Trailer Idler Hub Assembly # AKIHUB-440-2-G-1K for your trailer. This hub fits the BT8 Spindle # TRU59FR which is 1" in diameter and has a length of 4-1/4" long from the inner bearing landing to the end of the threads. The Idler Hub Assembly # AKIHUB-440-2-G-2K you found fits a BTR Spindle # TRU44FR which has a diameter of 1.063" for the hub bearings.
    view full answer...
  • Recommended Timbren Axle-Less System for Trailer Used for Salt Water
    The 400 lb Timbren Axle-Less Trailer Suspension System # A4WS440 has a standard black powder coat finish that does a good job protecting against the elements, but salt water will definitely be pretty harsh to this set so instead I recommend going with the kit # ASR400S02-G instead which uses a galvanized finish instead of the black powder coat. A galvanized finish will definitely hold up better to salt water and to help extend the lifespan of this kit I also recommend to spray down your...
    view full answer...

Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.