Correct Hub for Dexter EZ Lube 3,500-lb Axle
Updated 01/27/2026 | Published 01/04/2026
Products Featured in This Question
Question:
Is this the correct hub for a Dexter ez-lube 3500 lb axle 5x8 utility trailer? The current hubs have H-545 on them, are 5 on 4 1/2, and I know they are the same bearings. The existing hubs are not galvanized. I included photos. Pretty sure this is it, but wanted to make sure it’s an exact match up. Thanks! CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased Part Number: CE13511
asked by: Dan
(click to enlarge)
(click to enlarge)
Expert Reply:
Hey Dan, I'm happy to help!
For a 3500 lb axle and a 5 on 4-1/2" bolt pattern, you can use the CE Smith Trailer Hub Assembly # CE13511 which is pre-greased with a carrying case if you don't need the galvanized option or the EZ Lube option.
The correct fit if you have the EZ Lube spindles with the built in grease zerk is The Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-EZ-K. And if you'd prefer a galvanized option, check out the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K.
What are you hauling with your trailer?
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Continue Researching
- Search Results: timken l44649
- Search Results: bearing buddy 1980a
- Search Results: brass punch
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: castle nut
- Search Results: spindle castle nut
- Search Results: race l68110 trailer bearings races seals caps
- Search Results: l68149
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement for Hub to Fit with Shorelander SS734 Bearing Kit
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Threaded - Galvanized
- Q&A: Replacement Hub For 2016 ShoreLand'r LUXR2314S7MH Boat Trailer
- Shop: Timken Replacement Trailer Wheel Bearing - L68149
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Q&A: How Can I Tell if I Need a New Idler Hub on My Trailer?
- Q&A: Is Trailer Wheel Hub Play Normal?
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Q&A: Dimensions Of Cotter Pin 165649 For EZ-Lube Axle
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Q&A: Recommended Tools To Install Bearing Kit # BK2-100
- Q&A: Grease Seal to Replace Part Number 174253tb
Josh B.
1/27/2026
Hey Dan, how did the new hub work out on your 5x8 utility trailer? Your update could make it easier for the next person matching hubs for a 3,500 lb axle.