Replacement Hub For 2016 ShoreLand'r LUXR2314S7MH Boat Trailer  

If the spindle is damaged, it'll need to be replaced. The #CE13511 CE Smith hub is compatible with a 3500 lb axle that uses an L68149 inner/L44649 outer wheel bearing and a 10-19 grease seal. For a spindle, you'll need a 3500 lb…

I did some research on a 2018 Shorelandr SLR22L ad it looks as if it comes with a 2,200 lb axle. In order to confirm this, you'll need to check the axle tag sticker on the axle tube or reach out to the trailer manufacturer with your VIN. If…

According to Shorlandr, your SLR22L trailer uses hubs with a L44649 inner and outer bearing. The #CE13511 hub you mentioned uses a different inner bearing, so it won't work for you. The good news is that the #CE13311 is the correct hub,…

In order to find the correct replacement hubs for your Shoreland'r boat trailer, you need to first know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the…

You can see all fixed 2-inch ball mounts by clicking on the linked page. The shortest of these is the Curt Ball Mount #C74WR. This aluminum ball mount measures 8-1/2-inches from the center of the hitch pin hole to the center of the ball hole. It…

Yes, you can absolutely use an aluminum ball mount with a stainless steel hitch ball without worry of the ball mount corroding. In fact, there are no aluminum hitch balls so manufacturers suggest the use of stainless steel as it is going to be the…

Most light duty trailers have a 17 inch coupler height, give or take an inch. Using the ballmount help page you were looking at, measure your hitch height on your truck and select a ball mount with the proper rise or drop to get you to 17 inches. The…

The hub flange outer diameter on the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased #CE13511 is 6-1/2". I went out to the warehouse and measured the hub height on the grease seal side. Measuring from…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…