Timken Replacement Bearing and Race Set Review Video

The DeeMaxx item #DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering 46304 caliper you will need the Kodiak Disc Brake Caliper item #KDBC225DAC.

Although we can get pretty close to the dimensions you mentioned, we don't offer an axle that matches the hub face distance exactly. The closest match would be #7359765 which has a 95 inch hub face to hub face distance. Going with this axle would…

The pricing algorithm can be messed up from time to time but I do know that things like availability, supply and demand, and what other places are pricing it as well have an effect on this. I'll send in a message to our pricing team to look at…

Yes, you can replace a square axle with a round beam axle so long as it is rated appropriately. You will need a new u-bolt kit for the round 2K axle, part #APUBR-10. We offer beam axles rated up to 3500-lbs and also axle-less suspension kits from…

First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…

You should be getting 12 volts on the running light circuit when the running lights are turned on. If not, the problem is either in the connector or upstream from there. The first thing you should check is the trailer connector on your towing…

I might have a solution for you, but the Yakima Bedrock HD System #Y01160-58 are only compatible with the Yakima HD bars like the #Y01157. The Yakima Bedrock HD, Overhaul HD #Y01151-58 and Outpost HD #Y01152-58 systems are all only compatible with…

There really are no special instructions for installing a hub, like part #AKIHUB-545-35-EZ-K that you referenced. You will simply remove the caps on the end and slide it onto your spindle. You will then just need to take off the old washer or nut and…

In regards to the Road Armor Shock Absorbing Equalizer Kits like part #LC696740, the only difference between the blue powder coated option and yellow powder coated option is that yellow denotes aftermarket and blue denotes factory. In other words, if…

Based on the measurements you gave me it sounds like Grease Seal #168233 that you referenced is the one you need. It's a double lip grease seal that has an Inner diameter of 1.688" and an Outer diameter of 2.332". The #010-180-00 seal…

For the 1.06 inch diameter Timken bearing you would want the part #TM23VR and for the 1.375 inch you'd want the #TMK73VR.

According to the part numbers you gave it looks like you need outer bearing #L44649 with the matching race #L44610, inner bearing #L68149 with the matching race #L68111, and then the grease seal #168233 which has an inner diameter of 1.688" and…