Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.9 out of 5 stars (45 Customer Reviews)
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Exactly what I needed. Good quality. fits perfect on my Snowfire trailer!!!
I just now completed changing out and adding the new hubs and brakes on my trailer. The only issue or difficulty was my error in ordering the correct hubs/brake drums. The return was properly handled and the new parts arrived in a timely manner. All I have left to check on is the functionality once install my brake controller in my truck. I would make additional purchases from etrailer.
Couldn't have been easier!, Straight out of the box and onto the axle. Getting my axle buddies on there. Took a little bit of banging around but they seem to be spinning. True and definitely an improvement over the broken Coleman studs I had before.
I installed these hubs and drums 1 years ago and in that time we have taken our camper on 12 trips locally (about 120 miles round trip each) and one big trip from Louisiana to Colorado and back which was close to 3,000 miles total. These hubs and bearing have performed perfectly. The drive to Colorado was 24 hours one way and the hubs never got hot. Everything was a perfect fit too.
I received within 4 days the wheel hub (with bearings and seal) together with backing plates that contained brake shoes and braking magnets. They installed perfectly on my Coleman popup trailer. Prices were reasonable. In fact the electric backing plate assemblies cost less than a previously purchased set of braking magnets.
Thanks for helping me get on the road again!
Keith
E trailer did a fantastic job.
Before order: Technical support / help was excellent.
Goal, conversion of a 1998 Floe snowmobile trailer from surge to electric brakes.
Problem, due to time and corrosion, I could only supply partial part numbers, spindle diameter.
etrailer did a fantastic job, researching, and getting me the correct part numbers, so I could order.
Julie did a great job.
She was very timely, communicated clearly and honestly, and just “kept me in the loop”.
I received the order came on the projected date, complete and undamaged. Excellent.
I would highly recommend etrailer, for your part needs.
Seems to be very good quality. These hubs/drums fit the Dexter axle of my pop up camper perfectly. I like that they came with races, bearings and seals. The races were already properly installed.
product worked just like it should . The video on youtube made installation a snap . Even with a snafu at the warehouse of the wrong bearings being shipped one phone call to the very helpful rep led to a quick resolution . I have dealt with etrailer before and am very satisfied with their products and service .
I have used etrailer several times and the experience is always the same... the correct parts at a fair price and delivered when they said it would be.
I now have 9780+ miles on this item.
I am going to replace the bearings. They still roll but one is getting a tick. About to go out. I guess I'd rather change them now as opposed to a 1000 miles from home.
One question, does the magnet go on the top or bottom, I have seen them displayed both ways. I have already installed them with the magnets on the top. The right and left references looking forward, I presume..
Fit and function are great. Price and quality are spot on. I will be ordering from etrailer next time I need parts.
Worked well for our 1800lb pop up camper. Install was pretty simple.
Work as advertised for my trailer build.
Everything looks good and price was great!
Installation still to come so will update after install.
Great quality !!! Great prices !!! Fast shipping !!!
Great product as described. Fast service.
Great product exactly as described. Great prices and most selection out there. Shipping was as fast as you can get. Don't hesitate to buy here! Thanks!
Everything arrived in good condition. The entire ordering process went very well.
Professionally pregreased well apprecia ted.
Arrived on time and in great condition, very well packaged. I haven't installed yet.
You had what i needed and it got here fast. Thanks
Same
Great price and fast shipping!
Just got it! Exactly what I asked for.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William
12/30/2023
Great!!!