Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number 14125A. This is an Axle Tek replacementtrailer wheel bearing. This is an outer wheel bearing. These replacement bearings arehigh quality, tapered, roller bearings, designed for high speed use. All bearings havean industry standard number stamped on them, regardless of the brand. When you go to replace your trailer bearings, what you would want to do isnormally look on the inner ring of your bearing.
There should be a number stampedthere. For this one it would show 14125A, which is the part number. Yourbearing might be a different brand where it has a different number. If you could justgive us the part number, we can cross-reference it to get you the correct trailerbearing. If you do not have the part number off the bearing, the other way to getit would be to measure the inside diameter of the bearing, on the inner ring right here.To do that correctly, you do need to use a digital caliper, to be able to measure itinto a thousandth of an inch, because that measurement is listed in thousandths of aninch, so a ruler or a tape measure would not work.
What you'd want to do is justmeasure this inner diameter of the bearing. For this one it would be 1.250. This bearing does consist of three parts, basically. The cone or the inner ring is what slidesover the spindle, the roller bearings themselves which will roll, and then they are heldin with a roller retainer or a cage, which holds the bearings in place. Forlubrication, most wheel bearings will use a grease, some of them would use an oil.
There is one other piece that is required for this, and that is the race, the bearingrace. The race would be the part that is normally pressed into the hub, and that wouldgive a spot to where when the bearing is inserted, it would rotate on that bearing race.Now, for this bearing part number, the correct race, which is sold separately, would bepart number 14276. The outer diameter is the critical measurement on the race,and on that part number would be 2.717. That should do it for a review on part number 14125A.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Came loose within bubble pack shipping envelope, made in china
So far the replacement bearings are working fine.
Stacey set me up with the parts I needed. Iwas happy with the prices and quick shipping.Iwould buy from them again.
Excellent service and quick shipping. I will be ordering all my trailer equipment from them.
Kim was awesome to help me with my order, ordered on Wednesday afternoon and had them Friday afternoon! All item were correct and will have all my trailer parts business from now on! Great customer service! Thanks
Product shipped very quickly. Product matched description. I'm very happy with my shopping experience with etrailer.
Fast shippemnt, great customer service. Time will tell on product it self.
First one received damaged but etrailer sent me another one with no issues. Great customer service and pricing.
These bearings are being used in a Wind Turbine YAW and mount build.
Etrailer having a full spec sheet makes this possible and the quality is a degree above the choices I had locally.
Needed to replace for EHB disc brake c onversion
No complaint here. I have been very pleased with the performance of these bearings and races. They have been in place for several thousand miles with positive results to date.
At least these were in a bag together.
I bought 4 inner bearings, 4 outer bearings, 4 seals and 4 cotter pins. These were the only ones that were in a bag together everyone else was loose in the box.
Part of my DE46AR upgrade.
Great looking bearing kit with a great price, purchased this kit as a spare replacement for new hub assy. purchased. Great customer service.
Great trailer hub assy, Will be using this hub to upgrade from a 6 lug hub to this 8 lug hub. Great price and excellent customer support.
They look to be a quality product. I would have liked the bearings and races packaged so they could be stored with out damage or a chance of rusting. Two of these sets are spares so I don't have to sideline a trailer for an extended period.
4 NEW DRUMS 12 -2 INCH 8 LUGS. FOR MY TRAILER THEY ARE OUT OF ROUND FROM DAY ONE . IF I USED TRAILER I WILL GET THEM CUT.{ U HAVE GOOD PRICE.} BEARING OK.
Received as promised and identical to the original! Thanks!
fits my 1999 Kaufman 3 car wedge trailer with Dexter 12"x2" brakes 6k 7k lb axles 8 lug wheels
Exactly what I needed. Youtube showed me how to take out the old and put in the new bearings and races. They fit perfectly. The part no. was hard to research, but I was pretty sure what I ordered was the right set. I confirmed the part numbers when I beat the races out of the hub. The part number was embossed on the inside of the race and they matched the ones I ordered. I got them via ground delivery much sooner than they said. I received them in about three days and it only took an afternood to install them and new brakes. Can't beat the satisfaction of doing something yourself and saving hundreds of dollars in the process.
I can say that etrailer is top notch when it comes to customer service. I had some question about the MORryde cushioned pin box as my 5th wheel gross weight falls between 2 different models. etrailer answered my question and the one they were unsure of they directed me to MORryde to get specifics. By no means does this reflect on etrailer but the shipping handled by UPS just flat sucks. I scheduled a day later than they originally wanted me to be available for delivery due to prior commitments. The next day 30 minutes after scheduled appointment I find out it wasn’t even loaded on the trailer. I decided to drive 3 hours round trip to just pick it up myself instead of dealing with UPS again. This won’t stop me from being a return customer, etrailer ROCKS!!!!
nice bearings
Easy to order from. Competitive pricing. Quality! parts. Fast shipping.
bought these bearings and seals approximately a year ago and installed them myself. I watched the instruction video etrailer has a just followed it. Everything went smoothly and we have put approximately 6,000 miles on them since the install. All is good.
Finished my first bearing re-pack on our 369 this weekend. Order a set of bearings and seals in case of an emergency if needed. Quick delivery. Always happy with etrailer!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Sid
12/4/2023
Two years since the original install. I pulled the bearings after one year and repacked them. They were in like new condition yet. They are working well and when needed I will buy more.