7k Trailer Axle Needed With A 95" Hub Face And 80" Spring Center
Updated 01/10/2025 | Published 01/08/2025
Products Featured in This Question
Question:
i am looking for a 7k capacity axle with a 95inch hub face and a spring center of 80. i see you have the e95gr but the spring center is 79 1/4inch is that close enough or do i need something exactly 80?
asked by: Benito A
Expert Reply:
Hi Benito,
Even though it's super close that 3/4" difference can cause issues since the spring seats must line up with the hangers welded to the frame rails. We do offer the Trailer Axle Beam with Easy Grease Spindles # e88GR which has a 7k capacity, 95" hub face, and 80" spring center. The spindles on this axle use bearings # 25580 (inner) and # 14125A (outer) and grease seal # GS-2250DL. You'll want to verify if your current hubs use the same bearings and seals, otherwise you'll need to replace the hubs as well.
If you want this axle with the correct fitting electric brake hub/drum assemblies included then you'll want to use part # e83SR.
If you need anything else or still have questions just comment below and I'd be happy to help.
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 79-1/4 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Search Results: seal sleeve
- Search Results: wear sleeve
- Search Results: spindle sleeve
- Search Results: spindle wear sleeve
- Search Results: spindle seal sleeve
- Search Results: kodiak 225 brake pads
- Shop: Grease Seal GS-2250DL - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles
- Shop: Spindle Grease Seal Set for 25580 Inner Bearing and 2.441 Bearing Buddy
- Shop: Oil Bath Seal - Double Lip - I.D. 2.375" / O.D. 3.376" for Legacy Dexter 8K Axle - Qty 1
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles
- Shop: Replacement Ceramic Brake Pads for Hydrastar 225 Disc Brake Calipers - Qty 4
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs
- Search Results: drop axle
- Q&A: Bulldog Collar-Lok Coupler - Gray - Adjustable Channel Mount - 2-5/16 Ball - 12,500 lbs Origin
- Q&A: Is There a Risk of Adding Too Much Grease to an EZ-Lube Spindle
- Q&A: Replacement Grease Seal for Seal with ID of 2.125 and OD of 3.371
- Q&A: Correct Replacement Bearings and Seals for Dexter 7,000 Lb Axle
- Q&A: Replacement Hub with Bearings LM67048 25580 and 2-1/4 inch Grease Seal
- Q&A: Correct Bearings and Seals for a 2022 Grand Design Solitude 390RK
- Q&A: Will Replacement Grease Seal 21325 Fit an Old Star Line Axle
Benito A.
1/9/2025
Sorry i forgot to include im looking for a drop axle with those dimensions. Are there any drop axles with a 80” spring center and 95” hub face?