Recommended Disc Brake Conversion Kit for a 2019 Grand Design Solitude 373FB
Updated 04/05/2025 | Published 04/03/2025 >
Products Featured in This Question
Question:
Looking for the Deemaxx Disc Brake Kit W/ Actuator For Tandem Axle Trailer 2019 Grand Design Solitude 373FB. Your web search when filling out your vehicle is showing the install kit with tri axles. All Solitude are tandem Axle, and I would like to remove the drum brakes and install disks.
asked by: David L
Expert Reply:
Hey David! The DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers item # DE46AR will work so long as you have idler hubs with a 8 on 6-1/2 lug nut pattern like item # DE46VR. These are slip on rotors so you're definitely going to need some idler hubs too. They are sold individually.
It looks like your 2019 Grand Design Solitude 373FB has 7k axles with inner bearing item # 25580 and outer bearing item # 14125A. The DeeMaxx Trailer Idler Hub for 7,000-lb Axles - 8 on 6-1/2 item # DE46VR would definitely fit these but I recommend confirming before ordering.
You can send me a picture of the axle tag to the email address you receive this response from or pull one of the hubs and check the part numbers stamped into the sides of the bearings.
Product Page this Question was Asked From
DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Rotor - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- DeeMaxx
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: 20419
- Search Results: 5th wheel gooseneck adapter
- Shop: Dexter Tow Assist ABS Bluetooth Communication Adapter
- Shop: DeeMaxx Trailer Idler Hub for 7,000-lb Axles - 8 on 6-1/2 - Galvanized
- Shop: DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Rotor - 8 on 6-1/2 - 7K
- Shop: Dexter Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Search Results: trailer brakes
- Search Results: idler hubs
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU37FR
- Shop: Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles
- Search Results: 25580 bearing
- Search Results: 14125a
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 1/2" Bolts - 7,000 lbs
- Shop: Kodiak XL ProLube Kit for 3500-lb Axles
- Video: All You Need to Know About the Kodiak Disc Brakes
- Video: Checking Out the Kodiak Disc Brake Kit
- Video: Checking Out the Dexter Trailer Idler Hub Assembly for 5,200-lb to 7,000-lb Axles
- Video: Detailed Breakdown of the DeeMaxx Trailer Idler Hub for 7,000-lb Axles
- Video: DeeMaxx Disc Brakes | Expert Insights from the Manufacturer
- Video: Review of Dexter Trailer Hubs and Drums - Hub and Drum - DX62KR
- Q&A: Converting 7,000 Pound Grease Hubs Over to Oil Bath Hubs
- Q&A: Changing Trailer Hubs from Grease Type to Oil Bath Type
- Q&A: Can a Dexter Hub be Swapped from Grease to Oil Bath?
- Q&A: Can Kodiak XL ProLube Kit Work on 7,000 lb. Idler Hubs
- Q&A: 7,000 lb Trailer Axle 6 To 8 Lug Hub Conversion
- Q&A: How To Convert from Grease to Oil Bath Hubs
- Q&A: Could Kodiak XL ProLube Kit XLPROLUBE2440KIT Fit 7,000 lb Dexter D70 Hub


David
4/5/2025
Jarred, wouldn't the de66ar? Other than that comes with half inch wheel bolts instead of 9/16.