Correct Replacement Grease Seal For 7000lb Lippert Axle
Updated 06/18/2025 | Published 08/05/2021
Products Featured in This Question
Question:
The seals I purchased for the subject axle are too large, 2.25 ID. I see on your site seals for a 7000 lb lippert with a 2.125 ID. Please confirm if the 2.125 ID seal is the correct one for the subject NV# as I see 2.25 reference for other Lippert 7K lb axles. Thank you.
asked by: Werner W
Expert Reply:
I reached out to my contact at Lippert and based on the NV 248685 your 7000lb Lippert axle uses inner bearing # 25580, outer bearing # 14125A, and grease seal # GS-2250DL.
Now this grease seal has a 2.250" I.D. which is the same as the seal you purchased, so I do not have a good answer to why yours is not fitting as that is what your axle was designed to use.
I was unable to find an order through us so I recommend double checking the dimensions of the seal you ordered to make sure it is actually a seal with a 2.250" I.D.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- TruRyde
more information >
Continue Researching
- Q&A: Looking for Replacement Grease Seal for 7k Curt Axle of Brinkley
- Search Results: trailer brakes pads
- Search Results: 2250dl
- Shop: WFCO Auto Detect RV Converter and AC/DC Distribution Panel - 12V - 25 Amp
- Search Results: lp detector
- Search Results: rv power center
- Search Results: hub saver
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Dexter Grease Seal for 12" x 2" Hubs - 2.25" ID - 3.376" OD - After 1998 - Qty 2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.125" / O.D. 3.376" - 440972
- Shop: Grease Seals 10-36 (pair)
- Search Results: trailer bearings races seals caps
- Search Results: grease seals
- Q&A: Replacement Bearings and Grease Seal for 7,000 Pound Lippert Axle
- Q&A: Which Grease Seal Will Fit a Dexter K71-305-00 For My Trailer Axle
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Q&A: Replacement Double-Lip Seal for Lippert Part 122088 with 2.250" ID and 3.376" OD
- Q&A: Replacement 10-36 Grease Seal for a Curt 7k Axle
- Q&A: Will Smart-Slot Crossbar Adapter Kit for Yakima BigCatch Saddles Fit Thule WingBar Evo Bars
- Q&A: Will Yakima Smart-Slot Mounting Kit Fit Thule Wingbar Evo Channels
- Video: All About the Grease Seal
- Video: What to Know About the Grease Seal
- Video: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles: The Breakdown
- Video: Checking Out the Rhino-Rack Nautic 581 Kayak Roof Rack w/ Tie-Downs
- Video: Comprehensive Review: Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Video: Let’s Check Out the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles
- Shop: Roof Rack
- Article: Most Popular Wheel Bearings
Tim
6/18/2025
Just ran into the same issue.. got new kit with seal 10-36 and is 2.25 and the id is too big for my 7k axel. Turned out it’s. 2.125 Id.. ez lube axle .. what are they different like that.. ?