Video Transcript for Review of Dexter Trailer Bearings Races Seals Caps - Bearings - DX58ER

Hi everyone. Steve here with etrailer.com. Let's take a look at our Dexter bearing kit for 7,000 pound axles. Now folks, this is a complete bearing replacement kit. You're gonna get enough parts here for one hub. You're gonna get the bearings, the races, the seal, the tang washer, and the cotter pin, all to help streamline that hub maintenance.

Now, I'll put the information on the screen here as far as the bearing numbers, races, the seal and those kind of things. But again, this is for a 7,000 pound axle. Make sure you're checking your old hardware and your old parts to be sure you're getting the right stuff. Most likely it's engraved on the side of that bearing and also on the race itself in the metal. And the same thing with the seal.

Now this is a double-lip design seal, so that's gonna help retain grease, block out all that dirt, moisture, water, road debris, dust, those kind of things. So again, folks, this is enough to do one hub on that 7,000 pound axle. So if you need to do two for one axle or four for tandem axle, make sure you're getting the right quantity. And if you have any questions about that or any other parts here, or questions about trailers in general, we're more than happy to help you. Just reach out to us.

That's gonna wrap it up for our quick look together. I'm Steven. Thanks for watching.