Malone Canoe Carrier with Tie-Downs - Foam Block Style - 6" Long

See what our Experts say about this Malone Watersport Carriers

• Recommended Kayak And Canoe Roof Top Carrier For Toyota RAV-4 With Factory Crossbars
  The Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs - Rear Loading - Clamp On # MPG113MD can absolutely be removed easily from the factory crossbars on your Toyota RAV4 when you are wanting to carry a canoe instead. When you are ready to carry your canoe I recommend using the Malone Canoe Carrier with Tie-Downs - Foam Block Style # MPG156 which will protect your canoe from running on your crossbars, and the included tie downs will keep it secure on the roof of your RAV4. I included...
  view full answer...
• Can a Canoe be Carried on a Rhino-Rack Roof Basket on a 2012 Toyota 4Runner
  You could carry a canoe on the Rhino-Rack basket # RMCB02 but I recommend adapting some foam blocks # MPG156 to protect the canoe and the basket. Also you will need to make sure that the combined weight of the canoe and the basket does not exceed the roof rack capacity or the vehicle roof weight carrying capacity, which ever is lower. Consult the vehicle owners manual and/or Toyota for the roof capacity on your 2012 Toyota 4Runner. Ideally, though, you would remove the basket and put the...
  view full answer...
• Temporary Solution for Transporting Canoe on Toyota Prius with Naked Roof
  As a temporary solution a foam block style carrier is a really good option to transport a single canoe on top of your friend's 2014 Toyota Prius that isn't already equipped with a roof rack. For this I specifically recommend the Malone Canoe Carrier # MPG156, which includes the foam blocks themselves that will attach to the gunwale on the canoe and sit right on the Prius' naked roof, along with all the necessary tie-down straps. Just be sure to clean your buddy's roof before mounting the...
  view full answer...
• How to Carry a Canoe on a 2013 Toyota Prius with a Bare Roof
  If your Prius has a bare roof then the only option for carrying a canoe would be a foam block carrier like # MPG156. Otherwise you would have to install a roof rack. We have different roof rack fits for the different 2013 Prius models: Prius, Prius c, Prius plug-in, and Prius V. I want to make the right recommendation so if you are interested in a roof rack please let me know the specific model.
  view full answer...
• Canoe Carrier Options for a 2015 Subaru Outback Wagon
  If your 2015 Subaru Outback has the factory roof rack with crossbars that run side to side then you can use the Yakima KeelOver, # Y04069, as a direct fit. If your Outback does not have factory crossbars then you can use a carrier designed for naked roofs such as # MPG156.
  view full answer...
• Canoe Carrier for 2010 Ford Flex that Doesnt Require a Roof Rack Installed
  For an entry level canoe carrier solution the Malone Canoe Carrier part # MPG156 that you referenced would be a great option. It doesn't require a set of crossbars to install either so you'll save money in that area as well. The tie-downs are included.
  view full answer...
• How to Carry a Canoe on the Naked Roof of a 2013 Toyota Prius V
  The Yakima foam blocks Y04056 could be a good option for a naked roof 2013 Toyota Prius V. But I recommend the Malone foam blocks # MPG156 since they are less expensive and because Yakima has stopped making the foam blocks. To attach it to a vehicle with a naked roof you would first make sure the bottoms of the pads and the roof are clean. Then you would set the canoe down next to the vehicle so that it over hangs the front and rear of the roof evenly. Next you will place the blocks on...
  view full answer...
• Roof Canoe Carrier System for Use with Hitch Load Support on 2018 Hyundai Ioniq
  All roof racks currently made for your 2018 Hyundai Ioniq, shown on the linked page, consist of two crossbars and the related foot assemblies. But since you have a hitch support like the Malone Axis # MPG907 to hold one end of your canoe I do have a good solution for you that will cost much less. We offer canoe carriers that do not require any roof rack crossbar. These cost-effective carriers include items like the Malone Canoe Carrier with Tie-Downs # MPG156. This kit includes 4 foam...
  view full answer...
  
• Recommended Canoe Carrier for 2012 Subaru Outback with Factory Crossbars
  For the factory crossbars on your 2012 Subaru Outback, I would recommend the Malone Foam Block Rooftop Canoe Carrier, part # MPG156. The foam blocks used to support the canoe can be mounted to the crossbars, or can be placed directly on the roof surface. The kit includes the foam blocks, tie down straps and the bow and stern lines used to secure the canoe to the front and rear of the vehicle. If you decide to use the foam blocks directly on the vehicle roof, be sure the blocks and the...
  view full answer...
• Recommended Reasonably-Priced Canoe Carrier for 2012 Honda Odyssey w/ Bare Roof
  The Malone canoe carrier you've looked at, part # MPG156 would be an excellent choice that's reasonably priced. The kit contains 4 foam blocks that slip over the gunwales of the canoe and protect the roof. Two straps for securing the canoe to the roof (run straps through car doors) and tie downs for the canoe's bow and stern are also included. You might also be interested in anchor straps like # RRRBAS. You'd close the straps in the vehicle hood and rear hatch to provide an attachment...
  view full answer...
• Can Malone MAL63FR EcoLight Sport Trailer Carry 15 Foot Canoe
  The Malone # MAL63FR is meant for boats up to 14 feet in length. As your Old Town Saranac 146DLX is almost 15 feet long, the # MAL63FR wouldn't be a good choice as the bow of the canoe would sit too close to the rear of the tow vehicle which could possibly damage the canoe or vehicle. I'd recommend a longer trailer like # MPG460G which can handle boats up to 20 feet long, which would work better with your canoe. To secure the canoe to the trailer's crossbars, you can use the # MPG156...
  view full answer...
• Recommendation for TracRac Ladder Rack With Extension Carrying a Canoe Having Cab Contact
  The T-Rac Pro2 Truck Bed Ladder Rack w/ Over-the-Cab Extension # TH37002XT-EX has a height above the bed rails of 27-1/4 inches. There is not a height adjustment available for the TracRac systems. Since you are having issues with your canoe hitting the cab, it sounds like you have too much weight to the front of the system or there is too much of a curve in the canoe, so you may want to start by adjusting the canoe's ride position so the weight is better supported. If you still have...
  view full answer...
• Do You Sell 96 Inch Crossbars to Mount a Canoe on My Adventurer Camper?
  I think I have a possible solution to the problem. Unfortunately, they do not make crossbars that are 96 inches. However, if you are absolutely set on transporting your canoe on your Adventurer camper, you can always purchase a Swagman Roamer LT Roof Rack for Pop-Up Campers and Camper Shells - Steel - 7' Long - 150 lbs # S80510. The length of the bars are 84-5/16 inches long, and they can be fasten on the camper roof. The installation will require drilling. For the canoe rack that will...
  view full answer...
• Using Erickson # EM07605 Load Extender to Carry Canoe on 2013 Chevy Silverado
  TheErickson # EM07605 Big Bed Junior Load Extender for Truck Bed or Roof and the # DTA968 Turbo-Rack would be a good choice for you for transporting your canoe. Canoes typically weigh less than 100 lbs, and the roof portion of the truck would only be bearing 1/2 the weight of the canoe. Your roof should handle it with no problem whatsoever. I'd also recommend a canoe carrier kit, like part # MPG156. The kit contains foam blocks that will fit around the crossbars to protect the canoe from...
  view full answer...
• Carrying Canoe Level on 2016 Chevy Silverado with Leer 180 Camper Shell with Rear Incline
  It would actually be better to have the canoe either all on the camper shell or all on the cab of the truck. When a load is split between the 2 it could result in problems because the truck bed can move some independently from the cab. The artificial rain gutters can be installed anywhere that you are willing to drill into. I do not recommend it on a 2016 Chevy Silverado because who wants to drill holes in the cab of a new truck! What you could do is use one Darby Turbo-Rack # DTA968...
  view full answer...
• Cost Effective Roof Rack and Canoe Carrier Recommendation for 2013 Ford F-350
  The most cost effective roof rack we offer for your 2013 Ford F-350 is the Rola Rail Extreme DFE part # R5007. It has a capacity of 110 lbs and aero shaped bars to help reduce wind noise. Then for a foam block style canoe carrier we have the Malone Canoe Carrier part # MPG156 which will work well and is cost effective. Also worth noting is that this carrier can be used on naked roofs too so you wouldn't have to install a roof rack if you really didn't want to. This carrier comes with tie-downs.
  view full answer...
• Recommended Cost Effective Roof Rack For 2019 Volkswagen Jetta To Carry A Canoe
  The Rhino-Rack Roof Rack System you were looking at that uses 49" Rhino-Rack Vortex Aero Crossbars # RRVA126B-2, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA, and Fit Kit # DK424 is currently the cost effective roof rack option for your 2019 Volkswagen Jetta and would do a great job at carrying a canoe. For a cost effective canoe carrier I recommend the Malone Canoe Carrier with Tie-Downs - Foam Block Style - 6" Long # MPG156 which uses foam blocks that go over your...
  view full answer...
• Carrying a Canoe on a 2003 Toyota Tacoma Double Cab
  First, we do carry Rhino-Rack products! The SportRack roof rack system, # SR1005 is a fit for your 2003 Toyota Tacoma double cab. So now we just need to get you a canoe carrier. One of the simplest and cost effective canoe carriers is the Malone foam blocks, # MPG156. For a roller, you could possibly use the Rhino-Rack model, # RR1375. It is designed to fit on Rhino-Rack Heavy Duty crossbars but it could work for you withl some modification (please note making modifications will void the...
  view full answer...
• Canoe Carrier Recommendation for a 2004 Jeep Grand Cherokee with Roof Rack
  To carry a canoe on your 2004 Jeep Grand Cherokee, I recommend a simple carrier like the Malone foam blocks, # MPG156. The blocks fit on your crossbars and the canoe rests upside down in the grooves in each block. Use the included strap and rope to tie down the bow and stern. If you have a 2 inch trailer hitch on the vehicle, I recommend adding a T-Load, # RTL002, which will help with stability and weight carrying of the canoe. Some additional foam blocks, like # SR5528 may be needed.
  view full answer...
• Roof Rack and Carrier to Transport 110-lb Canoe on 2014 Ford F-150 Super Crew Cab
  If you have a slide-in truck bed camper on your 2013 Ford F-150 you'll need to use a combination of rooftop canoe carrier and front-mounted hitch and load support to hold your 110-lb 15-foot canoe. The good news is that you do not have to install a roof rack on the truck cab, just a handy, low-cost and lightweight foam block canoe carrier like # MPG156 from Malone. The foam carrier will support one end of the canoe while the front-mounted hitch and load support will support the other...
  view full answer...
• Roof Rack and Canoe Carrying Recommendations for 2015 Toyota Tacoma Double Cab
  Don't let your bejeeburs be scared off, we have a solution for you. Rhino Rack offers their Vortex Aero roof rack system that's aerodynamic, yet reasonably priced. You can assemble a rack using the following parts: 54 inch Aero Vortex Crossbars # RRMA137B-2 Leg kit, part # RRRLKVA Clamp kit, part # DK174 For a canoe carrier, I really like the Malone foam block carrier, part # MPG156. The blocks will sit right on top of the crossbars, and the top of the blocks have grooves in them for...
  view full answer...
• How to Attach Vehicle Anchor Straps on a 2011 Kia Soul to Secure a Canoe
  The vehicle anchor straps can be mounted using some existing locations under the hood of your 2011 Kia Soul or you could use your own hardware. They used an existing bolt to secure one end of the strap for # TH529. For the back or another option for the front take a look at the etrailer Tie-Down Kit # e36ZR. This design has a foam tube that cannot be pulled out once the hood or hatch is closed. You will need a tie down kit and the # e36ZR would be a great choice. I have included a...
  view full answer...
• Canoe Carriers for SportRack SR1020 Roof Rack on 2009 Aliner Classic Pop-Up Camper Trailer
  The SportRack Pop-Up Camper Roof Rack # SR1020 will work on pop-up camper trailer roofs that have a 90-degree edge (not curved or rounded) and that are up to 85-1/2-inches wide. The four rack feet bolt permanently to your roof using included hardware. I recommend using a silicone sealant like # LT37464 during the installation to prevent any water from entering the camper. You will want to check the height of the skylights on your roof to ensure that the 3-inches of height added by the...
  view full answer...
• Load Assist for Canoe Onto 2012 Subaru Outback
  Yakima offers the LongArm, part # Y01149-1150. It's a load extender that fits into a trailer hitch receiver. It can be used at the level of a truck bed or the roof. If your factory bars are not round or square, you can use foam pads like the Malone Canoe Carrier # MPG156 to protect your crossbars and help keep your canoe secure. These pads fit naked roofs, round crossbars, square crossbars, aero or elliptical crossbars, and most factory crossbars. This part number comes with a tie-down...
  view full answer...

Do you have a question about this Watersport Carrier?