Watersport Carriers - Aero Bars

Hi Chase, We can get you that same LockRack setup for 3 long boards, though we don't offer it in a package so you'll have to get the pieces separately, though it's just the 45 cm (17-3/4") base and open angle long arms. So exactly…

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

...though to help keep the wind from lifting up on the board too much. If you don't already have a roof rack then I recommend checking out the Rhino-Rack Vortex StealthBar Roof Rack # JB0190. This uses...

Both the Lockrack Surfboard #LR59FR and SUP Rack #LR47FR are only capable of carrying a single surfboard. We do have the Rack #LR67VR from Lockrack which can carry 2 small surfboards. If you have large boards you will want to consider looking at the…

The Malone MegaWing, part #MPG207 and the SeaWing, part #MPG107MD are extremely similar and come in Malone's distinctive red styling, but have different applications. Its not the wrong picture, just not a great one to notice the differences. I…

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…

Hey Steve! I do not have an individual set of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item #RRRLT600 but I have a two pack item #RRRLT600H.

'Sup Kevin (see what I did there?). I do have a solution for you, but the Thule SUP Taxi #TH810001 and the Yakima SUPDawg #Y04075 are not going to work with the TruXedo Elevate Rack System #TX24NV. The TruXedo system has crossbars that are…

Hey Jason, Yes, The Yakima Skyline Roof Rack #Y99TB you were checking out includes the needed landing pads and towers, along with the crossbars. This will fit your 2021 Toyota Highlander as long as you have the flush factory rails running front to…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

Hey Samantha, the Inno roof rack part number #IN47ZV that fits your 2024 Ford Maverick would be a great option for mounting a paddle board carrier to. Then for a paddleboard carrier the LockRack Universal X part #LR88FR would work great to carry two…

Hi Chase, We can get you that same LockRack setup for 3 long boards, though we don't offer it in a package so you'll have to get the pieces separately, though it's just the 45 cm (17-3/4") base and open angle long arms. So exactly…

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

...though to help keep the wind from lifting up on the board too much. If you don't already have a roof rack then I recommend checking out the Rhino-Rack Vortex StealthBar Roof Rack # JB0190. This uses...

Both the Lockrack Surfboard #LR59FR and SUP Rack #LR47FR are only capable of carrying a single surfboard. We do have the Rack #LR67VR from Lockrack which can carry 2 small surfboards. If you have large boards you will want to consider looking at the…

The Malone MegaWing, part #MPG207 and the SeaWing, part #MPG107MD are extremely similar and come in Malone's distinctive red styling, but have different applications. Its not the wrong picture, just not a great one to notice the differences. I…

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…

Hey Steve! I do not have an individual set of the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item #RRRLT600 but I have a two pack item #RRRLT600H.

'Sup Kevin (see what I did there?). I do have a solution for you, but the Thule SUP Taxi #TH810001 and the Yakima SUPDawg #Y04075 are not going to work with the TruXedo Elevate Rack System #TX24NV. The TruXedo system has crossbars that are…

Hey Jason, Yes, The Yakima Skyline Roof Rack #Y99TB you were checking out includes the needed landing pads and towers, along with the crossbars. This will fit your 2021 Toyota Highlander as long as you have the flush factory rails running front to…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

Hey Samantha, the Inno roof rack part number #IN47ZV that fits your 2024 Ford Maverick would be a great option for mounting a paddle board carrier to. Then for a paddleboard carrier the LockRack Universal X part #LR88FR would work great to carry two…