Malone Crossbar Conversion Kit for Standard Utility Trailer

Ask the Experts about this Malone Accessories and Parts

• Malone Crossbar Kit For 6'x8' Utility Trailer
  The Malone TopTier Load Bar Kit for Utility Trailers part # MPG493 fits 4' wide and 5' wide trailer decks so it would not be compatible with your 6 foot wide utility trailer. The Malone Crossbar Conversion Kit for Standard Utility Trailer part # MPG475 will fit the 6'x8' utility trailer if it has an open frame with square rails.
  view full answer...
• What is Weight Capacity of Malone Crossbar Conversion Kit for Standard Utility Trailer MPG475
  The weight capacity for the set of crossbars part # MPG475 is 165 lb so it wouldn't have the capacity for the 210 lbs you mentioned. You'd have to look into the Malone trailer part # MPG525G which has a higher 400 lb capacity and would work great.
  view full answer...
• Could Malone Crossbar Conversion Kit # MPG475 Be Used on 5x8 Tractor Supply Trailer
  The crossbars of the Malone Crossbar Conversion Kit # MPG475 that you referenced are 13-3/4 inches tall so this kit would easily fit over your trailer side rails that are 11 inches tall.
  view full answer...
• How Wide is Malone Crossbar Conversion Kit # MPG475 Excluding Crossbar
  The widest portion of the # MPG475 that you referenced excluding the crossbar is 53-15/16 inches. Including the bar it's 78 inches.
  view full answer...
• Weight Capacity of Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475
  The Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 that you referenced has the weight capacity of the Malone crossbars that come with the kit of 165 lb.
  view full answer...
• Roof Rack and Kayak Carriers for 2006 Scion xB
  We can help you with a roof rack for your 2006 Scion xB to allow you to transport your two kayaks. On the linked page you can see all roof rack options for your xB with a bare roof. Please note that these various roof rack systems have differing weight capacities; you will want to be sure to choose one that can handle the combined weight of your two boats plus the chosen kayak carriers you mount on the roof rack. The lowest-cost roof rack with the maximum 165-lb weight capacity is the...
  view full answer...
• Recommended Crossbars for Standard 5x8 Utility Trailer to Carry 2 Kayaks
  The Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 may work well on your utility trailer, but it is designed to attach to the frame and not the side rails, so you'd need to install through the floor mesh on your Tractor Supply 5x8 foot utility trailer. To have a crossbar system that attaches to the raised side frame, I recommend the Malone TopTier Load Bar Kit for Utility Trailers - 250 lbs # MPG493 which is high as you mentioned but can have the supports cut...
  view full answer...
• How Much Does Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 Weigh
  The Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 that you referenced weighs 35 lbs.
  view full answer...
• Using Malone MegaWing Kayak Carrier on Trailer to Secure Old Town Fishing Kayak
  The Malone MegaWing Kayak Carrier # MPG207 referenced in your question is a great option for your Old Town Fishing Kayak that weighs around 120 pounds. The MegaWing is made specifically for heavier fishing kayaks like this and its 150 pound weight capacity is more than enough to safely support it. The carrier is designed to mount to a couple of crossbars that are up to 4-1/4 inches wide so you will need to fabricate a rack to mount to your trailer's frame or you can use something like...
  view full answer...
• Converting Malone MicroSport Trailer Crossbar Conversion to Low Bed Style
  Since you already have the Malone MicroSport Trailer - Galvanized Steel - 13' Long - 78" Crossbars - 800 lbs # MPG460G already comes with the Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475. It sounds like you are just looking for the lower crossbars but there isn't a conversion kit option for those bars. You can customize mounts just bolting square aluminum posts at your desired height to the frame and use the Crossbars for Malone MicroSport Trailers - 78" Long -...
  view full answer...
• Yakima BigStack Kayak Carrier Compatibility with Malone Crossbar Conversion Kit for Utility Trailer
  The Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 will allow you to add crossbars to any standard utility trailer using 78 inch square load bars. This will allow you to use the Yakima BigStack Roof Mounted 2 Kayak Carrier System # Y04041 you mentioned as it is compatible with square load bars. This will allow you to carry 2, 3, or 4 kayaks as you stated but will require additional straps for more than 2 kayaks. I've attached a photo from the instructions to show...
  view full answer...
• CE Smith Trailer Compatibility and Conversion For Crossbars
  The CE Smith Boat Trailer for Boats and PWCs up to 12' Long - 800 lbs # CE48810 will allow the winch stand with the winch and bow stop to be adjusted front to back to allow for proper fit and tongue weight. I've attached the installation instructions to assist as well as a video. The bunk boards can be removed if desired and you can use the Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 to give you crossbars.
  view full answer...
• Recommendation to Install Crossbars on Utility Trailer for Kayak Carrier
  I may have a solution for you, however the Inno Truck Bed Cargo Rack # INRT101-79 referenced in your question is designed specifically for certain model truck beds, so it might not be the best fit for your utility trailer. For your trailer, I recommend looking at the Malone Crossbar Conversion Kit # MPG475. This system is designed for utility trailers like yours to allow you to transport kayaks with your existing carriers. It includes two 78 inch load bars, 4 brackets and the mounting...
  view full answer...
• Availability of Crossbar System from the Malone MicroSport Trailer # MPG460G
  The Malone MicroSport Trailer # MPG460G uses crossbars like what you would find on the roof of a vehicle instead of bunk boards. This is sold on our site as the Malone Crossbar Conversion Kit # MPG475 and it comes with the mounting hardware. If you are wanting carpeted bunk boards instead we have them in the following lengths: 2' - # CE27850 3' - # CE27800 4' - # CE27810 5' - # CE27820 6' - # CE27840 These come in pairs.
  view full answer...