Lockrack Watersport Carriers
- LR24VR
- Canoe
- Kayak
- Paddle Board
- Roof Mount Carrier
- Aero Bars
- Elliptical Bars
- Factory Bars
- Round Bars
- Square Bars
- Saddle-Style
- Lockrack
- Clamp On
- No Load Assist
- Side Loading
- Folding
Adjustable width watersport carrier holds 1 kayak, 1 canoe, or 2 SUPs with rubber-coated, ratcheting arms - no need for load straps. Integrated locks secure your boat or boards to the carrier. Includes clamp-on and top channel mounting hardware.
Features:
- Adjustable watersport carrier lets you transport 1 kayak, 1 canoe, or 2 SUPs on your roof rack
- Unique design removes the need for load straps - bow/stern tie-downs still recommended
- Expandable base has multiple width settings to allow for wider watercraft
- Removable arms allow boat or boards to be loaded from the side of your vehicle
- Rubber-coated arms protect from damage while securing your watercraft at 4 touch points
- Rotating arms 90-degrees provides overhead clearance when not in use
- Collapsible carrier reduces height to 2-1/2" above your crossbars
- Rubberized strip on top of the carrier's base provides cushioning and slip resistance for your watercraft
- Easy installation with included hardware and tools
- Brackets and hardware included for clamp-on installation
- T-bolt hardware included for crossbars with top channels
- Integrated locking system secures your watercraft in the carrier - includes 4 keys
- Lightweight aluminum construction is corrosion resistant
Specs:
- Application: round, square, aero, elliptical, and most factory crossbars
- Carrying capacity: 1 kayak, 1 canoe, or 2 SUPs
- Weight Capacity: 175 lbs
- Interior dimensions:
- Minimum: 3" long x 22-1/2" wide x 8" tall
- Maximum: 4-1/4" long x 42-1/4" wide x 12-3/4" tall
- Exterior dimensions:
- Minimum: 3" long x 27-1/2" wide x 16" tall
- Maximum: 4-1/4" long x 47-1/4" wide x 16" tall
- Collapsed dimensions: 28-1/2" long x 28" wide x 2-1/2" tall
- Weight: 17 lbs
- 1-Year limited warranty
![image]()
Carry a Kayak, a Canoe, or 2 SUPs![Series-X Universal Watersport Carrier]()
LockRack's Series-X watersport carrier has an expandable base that works with ratcheting arms, allowing you to carry 1 kayak, 1 canoe, or 2 stacked SUPs. You don't have to own several carriers, changing them out each time you want to take a different watercraft to the lake.
![Series-X Universal Watersport Carrier]()
![Expandable Base]()
The carrier can expand or contract depending on the size of your watercraft. There are 4 holes in the middle expansion piece for the t-bolts once you've adjusted the carrier to your desired width. If your watercraft is wide, you can expand the base, threading the t-bolts through the carrier's base, then through the 2 holes furthest from the center of the bar. If you have a slimmer watercraft, close the gap between the 2 base pieces of the carrier, then thread the t-bolts through the 2 holes closest to the center of the bar.
![Ratchet Arms]()
When your LockRack is not in use, you don't need to uninstall the carrier from your roof. Just remove the arms, rotate them 90-degrees, and then reinsert them so that they lay parallel with the roof of your vehicle. This will reduce wind noise and give you more clearance when parking in your garage.
No Load Straps Needed![Series-X Universal Watersport Carrier]()
This carrier's two sets of curved, ratcheting arms firmly hold your boards and boats in place on your way to and from the water. Its design removes the need for load straps, however, bow/stern tie-downs are still recommended as they prevent your watercraft from shifting forward or backward during travel, especially during sudden starts or stops.
![Ratchet Arms]()
![Additional Straps]()
To load your kayak, canoe, or SUPS on to the Series-X you'll first need to remove the arms from one side of each carrier. To remove each arm, put the key in, rotate it, and pull the arm out, giving you access to the carrier's base. Once your watercraft is loaded, push the arms in until they click into place, securing it to your vehicle. To further secure your watercraft, you can attach bow and stern straps from your kayak, canoe, or SUPs to the front and rear of your vehicle (sold separately).
![><img class=]()
If your vehicle doesn't have any tie-down points, you can get an anchor kit (sold separately), which will let you create anchor points for bow and stern straps in the creases of your vehicle's hood and hatch.
Universal Installation![Adapters]()
This LockRack carrier can be installed in the top channels of your crossbar or with the provided adapters. The adapters clamp around most crossbars.
![adapters]()
To install the carrier with the adapters, set the carrier on top of your crossbars with the top portion of the adapter clamp already attached to the carrier base. Then hold the bottom portion of the clamp under your crossbar and tighten the clamps down with the included hardware and tool.
Built-In Security
![Ratchet Arms]()
LockRack carriers have security built-in with locks in the base of the carrier, securing the ratcheting arms. Once you've locked your boards or boat in the carrier by pushing the arms tight against your watercraft, the arms will stay locked until you remove them with a key.
![Replacement Key Number]()
This carrier comes with 4 identical keys. Once the arms are locked in place, insert a key into the locking mechanism in the carrier base. Rotate the key to unlock and release the ratcheting arms. If you ever need a replacement key (sold separately) you'll need to know your original key number. This number is not located anywhere on the carrier so be sure to make note of the numbers printed on the inside of the original set of keys.
LR53FR Universal Crossbar Adapter for Lock Rack Watersport Carrier
LR88FR Lock Rack Series-X Universal - Expandable Watersport Carrier - Canoe, Kayak, or 2 SUPs - Side Loading - Channel Mount
Installation Details 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.