Replacement Hub Assembly for Tapered 3/4 spindle

Updated 07/25/2017 | Published 07/24/2017

Products Featured in This Question

Replacement Trailer Hub Bearing - L44649

(2119)

$21.72

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

(12)

$98.17

Replacement Race for L44643 and L44649 Bearings

(1274)

$4.93

Replacement Race for LM11949 Bearing

(1274)

$4.10

Replacement Trailer Hub Bearing - LM11949

(2119)

$6.40

Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter

(16)

$62.24

Question:

Hi I am looking for replacement hubs for a 4 on 4 inch bolt pattern that fits a tapered spindle. The inner bearings are L44649 and the outer bearings are LM11949. The spindle measures 3/4 inch out to the threads and it increases in width to 1-1/16 inch towards the axle. I would like to fully replace the hubs with all new bearings, seals and components. However, if there is no hub that will fit this spindle then what would be all my replacement seals that I would need to rebuild this assembly. Thank you

asked by: Scott

Expert Reply:

We do have one hub that will work with 3/4 inch spindle # TRU54FR, but this particular spindle measures larger than 1-1/16 inches towards the axle and does not work with the same bearings. The hub, # AH15450ECOMP, also has a 4 on 5 bolt pattern. The grease seal is also going to depend on the measurements of your spindle and we do not have any matching the dimensions you gave.

We do have the correct replacement bearings # LM11949 with matching race # LM11910 and # L44649 with matching race # L44610.