Replacement Hub for Old Pontoon Boat Trailer With L11949 and LM67048 Bearings

Updated 09/09/2021 | Published 09/08/2021

Products Featured in This Question

Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter

(17)

$64.47

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

(14)

$99.75

Question:

I am looking for a hub to fit spindle with the following dimensions: A = 1.875 B = 1.684 C = 1.25 D = 0.75 E = 0.75 F = 0.25 Would also need bearings, seals and races. Hope you can help. Thanks, Steve

asked by: Steve K

Expert Reply:

It sounds like your existing hub uses a LM67048 inner/LM11949 bearing. The only hubs we offer that would be compatible with that bearing set would be an agricultural hub like # AH15450ECOMP which is meant for low-speed use (20 mph or less) on equipment like implement wagons and other agricultural equipment that's not used on public roads.

Since you have a pontoon trailer, your best bet would be to either have the spindles replaced with weld-on spindles that are compatible with modern, readily available parts or to replace the axle entirely.

If you'd care to reply with the capacity of your axle, I can recommend replacement spindles. For a replacement axle, I'd need to know the capacity of your current axle as well as its hub face to hub face dimension and the center to center distance between the spring seats. We offer some of the more popular sizes/capacity axles, and with that information, I'd be happy to look through what we offer to see if anything's compatible.

expert reply by: Mike L