What is the Overall Length of Agricultural Spindle # TRU54FR
Updated 10/11/2011 | Published 10/10/2011
Products Featured in This Question
Question:
What is the overall length dimension? What is the centerline distance bewteen the inner bearing and outer bearing?
asked by: Tim W
0
Expert Reply:
I pulled an Agricultural Spindle # TRU54FR that you referenced and measured the length of it and found it to be right at 10.5 inches long.
I also grabbed bearings # LM67048 and # LM11949, slid them on the axle and measured the distance between the inner bearing and outer bearing from center to center and found that it is 2.33 inches.
Check out the video I put together for you that shows this measurement.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter
- Trailer Spindles
- Agricultural Spindle
- Without Flange
- LM67048
- 1-5/8 Inch Diameter
- Round
- For 3000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: What Spindle is Needed for LM67048 Inner and LM11949 Outer Bearings
- Q&A: Which Caliper Should Be Used With The Dexter 9-3/4" Hub-and-Rotor Assembly DX82UR?
- Q&A: Trailer Spindle & Hub With 5 on 5-1/2 Bolt Pattern
- Q&A: What Bearings Does The TruRyde Agricultural Hub TRU23FR Come With?
- Q&A: What are the Diameters of the CE Smith Spindle Axle CES38WR?
- Q&A: How to Distinguish Between Agriculture and Standard Trailer Hub
- Q&A: How to Find the Spindle Number on a Trailer Axle
- Article: How to Determine Tire/Wheel Diameter
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Most Popular Wheel Bearings