See what our Experts say about this Dexter Trailer Hubs and Drums

• Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
  If you can send me the diameter of the spindle where the grease seal sits and the diameter of the hub where the seal is pressed onto I can verify if we have the correct seal. Currently I do see we carry 2 hubs which use the Inner Bearing # LM67048 and Outer Bearing # LM11949. First is the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR which uses the Seal # 168233. This seal has an inner diameter of 1.688" and outer diameter of 2.332". The other hub is an Agricultural Hub...
  view full answer...
• Looking For Replacement Trailer Hubs For 5 on 4-1/2" Lug Pattern With LM11949 Bearing And LM11910 Ra
  Hey Jason, LM11949 is a bearing that works with LM11910 race, and we do have idler hubs that match these specs while also fitting your 5 on 4-1/2 lug pattern. That said, you'll also want to check the inner bearing to verify that it is LM67048 (1.25" inner diameter). If it is, then Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 # DX22XR is the correct idler hub. Keep in mind, these are not pre-greased so you will have to do that when they arrive. It is not hard to do...
  view full answer...
• Is 1.25" ID Bearing Too Large to Replace 1.19" ID Bearing?
  Hey Ralph, thanks for reaching out and providing all of the information! The Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR is close, but the inner bearing/race combo will be too large and will cause issues. Unfortunately, there aren't any bearing/race combos that will fit in place of it either. You might be able to custom order a hub through a local shop, but it sounds like you have an older setup that you might need to replace. What trailer is this used on?
  view full answer...
• Replacement Hub for Titan 17214
  Hey Jack, the Dexter Trailer Idler Hub Assembly # DX22XR is the same as the old 17214. This is designed for a 2,500 lb axle and uses a # LM67048 inner and # LM11949 outer bearing which matches the bearing dimensions you mentioned so it would be exactly what you are looking for.
  view full answer...
• Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
  The LM67000LA is a Timken part number for a bearing cone with a 1.250" I.D. and a 2.328" O.D. This is the same as our bearing part # LM67048. The LM67010 is a Timken part number for a race with a 2.328" O.D. that matches our part # LM67010. The only trailer hub we have that uses this bearing/race and has a 5 on 4-1/2" bolt pattern is the Trailer Hub Assembly part # DX22XR. This hub uses a LM67048 inner bearing (1.250") and a LM11949 outer bearing (.750"). Unfortunately, we do not have...
  view full answer...
• Replacement Axle for Old Trailer That Uses Hub Bearing L11949
  Tapered roller bearing # LM11949 is typically used in agricultural hubs and mates with race # LM11910. We do offer these parts the correct grease seals # CE16305A to match your dimensions but we do not offer any hubs that use this specific bearing as both the inner and outer bearing. Your best bet is to replace the entire axle with an up-to-date kit that includes everything, such as Dexter 3500-lb axle # 35545I-EZ-89 as an example. This 89-inch axle has spring seats spaced at 74-inches...
  view full answer...
• Replacement Hub Needed with LM67048 Inner Bearing and LM11949 Outer Bearing
  Terry, you are a rare specimen, and a welcomed question-asker. Thanks for providing all of those fine details! To replace your current hub, you need the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR. This comes with the correct bearings and races, but you'll need to also order the Grease Seal # SL150 and swap it out with the on that comes with the kit because this one will have the correct inner diameter. Let me know if you have any other questions about this, or if there's...
  view full answer...
• Do You Have a Hub That Fits LM11949 and LM67048 Bearings?
  Hey Jon, thanks for the information. The only 5 on 4-1/2 hub we have that fits a spindle with item # LM11949 and item # LM67048 bearings is an idler hub. It's the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 item # DX22XR. I am sorry but we do not have a brake drum that fits your spindle.
  view full answer...
• Is There Trailer Hub that Has Inner Bearing Diameters of .75 and 1.25 inches
  I wish we we could help but based on your bearing dimensions the only hub option is an idler hub with the part # DX22XR. This is a super rare bearing combination unfortunately.
  view full answer...
• Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
  I do have one hub that uses a .75" ( # LM11949) outer and a 1.25" ( # LM67048) inner bearing. This bearing combination is uncommon these days, but we have the hub # DX22XR. This is a 5 on 4-1/2" idler hub for a 2,500 lb axle. Bearings, seals, races, grease cap and lug nuts are all included. We also have a few sizes of wheels that will go with this; 15" wheel - # AM20422 14" wheel - # AM20365 13" wheel - # AM20253 12" wheel - # AM20132 We can also provide tires for any size trailer wheel...
  view full answer...
• Replacement Hub/Drum Assembly Needed For A Older Boat Trailer
  Hey Dennis, Based on the dimensions you provided it looks like your hub uses bearings # TMK36FR (LM11949) and # LM67048. The Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 # DX22XR is the only option we currently offer that uses these bearings and it unfortunately isn't a hub/drum assembly. You'll most likely need to replace the axle at this point to get a more common spindle and hub/drum. If you want to go that route then you'll want to measure the spacing between...
  view full answer...
  
• Looking For Spindle With LM67048 Inner And LM11949 Outer Bearing
  Hello Brandon. Well, this isn't reddit, but we do offer one spindle that used the LM67048 (1.25" inner diameter) inner bearing and the LM11949 (0.75" inner diameter) outer bearing. Take a look at the Agricultural Spindle for 3,000-lb Trailer Axles # TRU54FR. The # DX22XR does use a different seal though, so in order to use the # TRU54FR spindle you will need the # SL150 seal as well. I have included detailed dimensions of the # TRU54FR spindle below for your reference.
  view full answer...
• Recommended Replacement for Dexter 8-448 Hubs
  Hey Andrew, it looks like those are 2.5k axle hubs made by Dexter, so you can use the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR as a replacement. This kit includes the replacement hub, bearings, races, seals, and has the same 5 on 4 1/2 bolt pattern as your current ones. If you need anything else, please feel free to drop a comment and let me know!
  view full answer...
• Can I use a different seal than what comes with DX22XR
  That's a great question, Steven! Yes, you can totally swap hub # AH15450ECOMP for hub # DX22XR. To make it work, just be sure to use seal # SL150, it has a 1.5" inner diameter and a 2.331" outer diameter, which will fit perfectly with the Dexter hub. Just a quick note: when swapping hubs, it’s best to replace all of them with the same model to keep things consistent. Out of curiosity, what kind of trailer are you working on?
  view full answer...
• Availability Of Shorter Hubs For Old Trailer
  Hello Joshua, thanks for reaching out. It sounds like you have an older trailer that uses the old-style "short" hubs. Sadly this kind of hub is obsolete and we do not carry anything to match that. All of the current modern hubs are about 4-1/4" long just like you said. With no compatible hubs available, the best solution here would be to replace your axle with something more modern. If you want to look into that I would need to know what weight capacity axle you need. I would also need...
  view full answer...
• Availability of Trailer Hub with Bearing Numbers LM11949 and LM67048
  Hey Joe, we only have one hub that has that bearing combo with the part # DX22XR and it's an idler hub. Is your trailer/axle quite a bit older? This is a pretty old bearing combo that's not very common at all.
  view full answer...
• Will Dexter Trailer Idler Hub Replace 4-1/4" Long Trailer Hub
  Hey Steve! The Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR measures 4-1/16" long so it will work as a replacement for your setup.
  view full answer...
• Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
  It sounds like you are in need of an agricultural hub like the part # AH15450ECOMP that has a diameter of .75 where the inner bearing rides and 1.25 inches where the outer bearing rides. This hub has a 4 on 4 inch bolt pattern so if you needed one with a 5 on 4-1/2 inch bolt pattern you would want the part # DX22XR.
  view full answer...
• Replacement Hub with LM67048 Inner Bearing and LM11949 Outer Bearing
  Based on the inner and outer bearing numbers you provided (thank you!) the correct trailer hub assembly for your utility trailer is the # DX22XR. This hub does use the same # LM67048 inner bearing and # LM11949 as your existing assemblies. It is designed for 2,500 pound axles. The bearings, races, and grease seal are included. I wasn't able to pinpoint the dimensions on your current grease seal based on the part number you gave. The seal included with this particular hub has an inner...
  view full answer...
• Trailer Hub That Uses Bearings LM11949 and LM67048
  Both replacement trailer brakes and hub/drums should be selected based on the axle weight rating. The best way to select replacement hub/drums is to pull one of the hubs and remove its inner and outer bearings to obtain their part numbers. This is the easiest method to find a compatible hub. When not available measurements can be used but these need to be very precise, to the nearest thousandth of an inch, such as 1.234-inches. We do carry one bearing with an inside diameter of 0.75-inches,...
  view full answer...
• Hub For Outer Bearing LM11949 & Inner Bearing LM67048
  A bearing with a 0.75" inner diameter is LM11949 and a bearing with a 1.25" inner diameter is LM67048, and we don't have a hub with a 6 on 5-1/2" bolt pattern. For a hub with a LM11949 outer bearing and LM67048 inner bearing, the closest is a 5 on 4-1/2" bolt pattern for a 2,500 lb axle: - Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 # DX22XR If that's not the correct weight rating for your axle or if you don't want to get new wheels and tires with that bolt pattern...
  view full answer...
• Availability of Hub and Drum to Fit 1.25 to 0.75 Tapered Spindle
  The only hub assembly that we carry which matches with the 1.25" and 0.75" bearing inner diameters that you mention is the Idler Hub part # DX22XR. This has the 5 on 4-1/2" bolt pattern but it is only rated for 2,500 lb axles and it doesn't have the drum assembly that is needed for trailer brakes. There may be other options out there that can match but what you have is not typical for 3,500 lb axles so I recommend using a different spindle or replacing your axle(s) altogether so that replacement...
  view full answer...
• Titan Replacement for Dico Trailer Idler Hub 17214
  Dico was bought out by Titan who now offers 5-on 4-1/2 idler hub # DX22XR. This hub is rated for 2500-lb axles and includes bearings, races, grease seal, grease cap, and lug nuts. You can be assured it will fit the trailer spindle as long as the original hub uses the same bearings, inner bearing # LM67048 and outer bearing # LM11949. This Titan hub's included grease seal has an inner diameter of 1.54-inches and an outer diameter of 1.78-inches. Please click on the video link to see more...
  view full answer...
• Recommended Replacement For A Shoreland'r Trailer Hub Assembly SS733
  Hey Jeremy, The Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 # DX22XR should be the a match for the Shoreland'r trailer hub assembly SS733. The only thing I could not confirm as a match was the grease seal so I would just doublecheck the diameter of the spindle at point B from the diagram below to confirm fitment. The DX22XR uses a grease seal with a 1.688" Inner diameter.
  view full answer...
  

Do you have a question about this Trailer Hubs and Drum?