Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
Updated 03/12/2025 | Published 03/18/2020
Products Featured in This Question
Question:
what number with 1.25 in .750 out
asked by: Clay
1
Helpful Expert Reply:
From the measurements you gave me, it sounds like you have an Agricultural Spindle like # TRU54FR that uses # LM67048 Inner bearing and # LM11949 Outer bearing.
For a hub assembly with a 4 on 5 bolt pattern # AH15450ECOMP will work and the bearings, seal and cap are included.
I linked the parts along with a few review videos for you to reference.
expert reply by:
Robert C
1
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer spindles
- Search Results: lm67010
- Search Results: lm11910
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Search Results: 085~029~00
- Shop: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Search Results: 45040
- Search Results: 158452
- Search Results: 175020
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Gooseneck Hitch
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Shop: LED Trailer License Plate Light - Submersible - 3 Diodes - Clear Lens - Black Housing
- Shop: Replacement Trailer Hub Bearing - LM67048
- Video: Agricultural Spindle for 3,000-lb Trailer Axles Spec Review
- Shop: Floor Mats
- Shop: Vehicle Tow Bar Wiring
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles
- Q&A: What are the Overall Dimensions of the Dexter Agricultural Hub Assembly # AH15450ECOMP
- Q&A: Replacement Hub for Titan 17214
- Q&A: Is There Trailer Hub that Has Inner Bearing Diameters of .75 and 1.25 inches
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Q&A: Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
- Video: Installing the Double Lip Grease Seal for 3,500-lb Axles
- Video: Let’s Check Out the Replacement Trailer Hub Bearing
- Q&A: Is 1.25" ID Bearing Too Large to Replace 1.19" ID Bearing?
- Q&A: Replacement Bearings, Races, and Seals for Trailer
- Shop: Mud Flaps
- Video: Timken Bearing Kit Installation - Enclosed Trailer
Roy
3/12/2025
I also have the same spindle dimensions. My hubs are 5x4.5 studs and the hub width is a small 3.5 inches. I could replace the bearings but I'm not sure I'll find a seal that'll fit. Any suggestions? Thank you.