Review of TruRyde Trailer Spindles - Agricultural Spindle - TRU54FR

content loading

Customers compare TRU54FR to these similar products

Products Featured in this Video

TruRyde Trailer Spindles - Agricultural Spindle - TRU54FR Review

Ellen: Hey everyone. I'm Ellen here at and we're going to be taking a quick look at the agricultural spindle. This is going to be for a spindle that's maybe gotten damaged or worn out, or you just want to create a custom axle for your trailer. So this again, works for an agricultural application for 3000 pound axles.So let's take a closer look at it and talk a little bit more about the specs to make sure that this is the right fit for your particular application. It is going to be a weld-on design, so the back here you can just weld that into place on the rest of your axle. It is made out of a sturdy steel, so it should be up to the task for being that support for your wheels and everything on your trailer for many years to come.

Again, it works for 3000 pound axle, so that means that this spindle alone has a capacity of 1500 pounds or 1,500 pounds. The overall length of the spindle, if we go from the edge to the end of the threads on the outside is about 10 and a half inches. It does come with the castle nut, the Cotter pin and the washer to put that in place. As far as the stump diameter, it is about one and five eighths of an inch.And then for the bearings, races and grease seal that you would need to install on this, those specs can be found on our website here at for this product. That will give you a complete list of the appropriate seals and everything that fits this.

You can find those here at as well, so while you're picking this up, it's not a bad idea to get new hardware for everything to make sure that everything's nice and fresh and new when you put the rest of your axle together. You could also find a lot of other accessories for your trailer here at and other spindles as well if you need something a little bit different.Anyway, I hope this has been helpful in deciding if this is the right one for you. I'm Ellen here at Thanks for watching.

Questions and Comments about this Video

Info for this part was:

Installed by:
Kathleen M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.