Replacement Hubs For Trailer With 3/4 Inch Outer Diameter Spindle That Is Straight
Published 11/29/2017
Products Featured in This Question
Question:
I have to replace the hubs for my trailer. Current bearings are toast and the race is frozen into the hub. 3/4 inch spindle OD, straight no taper. cant seem to find that on the site.
asked by: Eric W
Expert Reply:
The only hub we have that is currently available for a 3/4 inch spindle is Item # AH15450ECOMP. This is an agricultural hub that fits 3,000 lbs axles for 4 on 5 inch bolt pattern. It takes an inner bearing, Item # LM67048, and outer bearing, Item # LM11949. It is meant to be used for low speed (less than 20 mph) agricultural applications. It is designed for a spindle like Item # TRU54FR.
If you can find the actual bearing number on your old bearings and seal or can send me a bearing measurement then I could find the correct parts for you. To find the correct bearings measurement, you will want to use a digital caliper like Item # PTW80157 to measure both inner and outer bearings. This will tell us what we need to get the correct replacement parts for you (additional information on measuring bearings attached).
Links to more information and videos attached.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Q&A: Hub and Drum Assembly for 1 1/4 inch by 3/4 inch Axle
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: etrailer Bearing Protectors w/ Covers for 1.78" Hub Bore - Chrome - Qty 2
- Search Results: 1000 lbs axle
- Shop: Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter
- Shop: Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Shop: Mud Flaps
- Video: Review of CE Smith Trailer Axles - Trailer Axle Beam with Studded Hubs - CES84XR
- Video: Comprehensive Review: Fulton Single Axle Trailer Fender with Top and Side Steps
- Q&A: How Do The etrailer Single Axle Trailer Fenders Install?
- Q&A: Looking For Hubs For 1.25" Straight Spindle On 1941 Power Company Trailer
- Q&A: Should Hole be Drilled in Axle for Leaf Spring with Center Bolt to Fit Properly
- Q&A: Help Identifying And Replacing Hubs And Spindles On An Old Trailer
- Q&A: Can Utility Trailer with 12 inch Wheels/Tires be Replaced with 14 inch Diameter Wheel
- Shop: Trailer Wiring