Replacement Hub and Spindle for 2014 Ranger Trailer
Updated 02/28/2022 | Published 02/25/2022
Products Featured in This Question
Question:
I have a 2014 ranger trailer and I need to replace the hub and spindle.
asked by: Rich A
Expert Reply:
In order to find the correct replacement hub and spindle you will need to know the capacity of your axle along with the bearings you currently have. In order to find the size of the bearings you can look for part numbers on your existing bearings. If these have worn off, you will need to measure the bearings/spindle. See the diagram below showing where to measure.
If you find that you have an inner diameter of 1.063" then you can use the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 # 8-258-5UC1 you looked at. This hub is designed for 2,000 lb axles. If you have a 2,500 lb axle then the # TA88545-2 is the only option. These use # L44649 inner and outer bearings. For a spindle that works with this hub we have the # TRU44FR for 2,000 lb axles with no brake flange and the # TRU27FR for 2,500 lb trailer axles with a brake flange.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: l44849
- Search Results: l44610
- Shop: Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Q&A: Replacement Hub For 2007 Marine Master Trailer With UFP 2,000 Lb Axle
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Q&A: Does a Spindle with Scarring and Complete Bearing Failure Need to be Replaced
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Let’s Check Out the CE Smith Deep V Keel Roller Assembly for Boat Trailers
- Video: Trailer Idler Hub Assembly for 2,500-lb Axles: The Breakdown
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What is the Length of the Trailer Idler Hub Assembly # TA88545-2
- Search Results: brake mounting flange
- Search Results: trailer hubs and drums
- Shop: Brake Controller
- Video: In-Depth Review of the Dexter Hydraulic Trailer Brake Kit
- Search Results: bt150a
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Search Results: trailer brake controller
- Search Results: grease seal 125 id
- Video: Review of the Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Recommended Parts To Add Hydraulic Trailer Brakes To 2014 Shorelander Trailer For 20 Pontoon
- Video: Comprehensive Review: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles
- Q&A: Can 3,500 Lb Hub be Used to Replace 2,000 Lb Hub with Same Size Bearings
on Trailer Hubs and Drums
