Availability Of 1-1/16" Trailer Spindle For 1987 Shorelander Boat Trailer
Updated 12/22/2025 | Published 10/27/2024
Products Featured in This Question
Question:
Good morning, looking for a trailer spindle that measures 1 1/16 by 9 3/4 for a 1987 Shorelander boat trailer. It has two slots on the tail end for u bolt mounting. i would post a picutes but this will now allow me to do so. Any help would be greatly appreciated, thanks.
asked by: Lonnie
Expert Reply:
Hello Lonnie, thanks for reaching out. We currently offer only one 1-1/16" spindle, the BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles # TRU27FR. This spindle measures 6-11/16" long overall, so it is quite a bit shorter than what you are looking for. Our spindle goes with the # CE13210 hub.
Product Page this Question was Asked From
BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-5/16" Diameter
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L44649
- 1-5/16 Inch Diameter
- Round
- For 2500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Do You Have a Furrion Chill Cube AC Unit w/a Heat Pump?
- Q&A: Will Furrion Chill Cube Thermostat Work With Furnace With 1 or 2 Speeds
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How Far Apart Are The Bolt Holes On etrailer Scissor Jacks e56VV ?
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Q&A: How To Choose the Correct Replacement Axle for an R&R Snowmobile Trailer
- Q&A: Bolt Hole Measurements On BTR E-Z Lube Spindle Brake Flange
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Determine Tire/Wheel Diameter
- Article: How to Measure a Trailer Axle
Jesse M.
12/22/2025
Hey Lonnie, were you able to find a spindle that matches the 9-3/4 inch length for your Shorelander trailer? Knowing what worked could help others trying to replace older spindles too.