Recommendation to Replace Brakes and Hub/Drum on a 1976 Apache Royal Camper
Updated 02/03/2026 | Published 06/24/2024
Products Featured in This Question
Question:
I have a 1976 Apache Royal camper that needs a new electric brake magnet. I have not been successful in finding a replacement. Looking for guidance on what alternative solutions might be available. The current brakes are the originals- Fayette 7 1/4 x 1 1/2 60250178-RH and 60250179-LH. The magnet number is 69740122. I would appreciate any advice you could offer. Thanks in advance.
asked by: Shawn
(click to enlarge)
(click to enlarge)
Expert Reply:
Hey Shawn, thanks for reaching out!
Industry standards with trailer parts didn't start to become a thing until about the 1990's which is why you're having such a hard time finding replacement parts.
The best solution would be to have a welder cut off and replace your spindles with the BTR E-Z Lube Spindle w/ Brake Flange # TRU27FR and then you can replace the brakes with part # AKEBRK-2 and the hub/drum with part # 8-173-16UC3-EZ.
I know it's not ideal but the only alternative is to replace the entire axle assembly.
Product Page this Question was Asked From
BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-5/16" Diameter
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L44649
- 1-5/16 Inch Diameter
- Round
- For 2500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-5/16" Diameter
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4
- Video: Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles Feature Review
- Video: Detailed Breakdown of the BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How Far Apart Are The Bolt Holes On etrailer Scissor Jacks e56VV ?
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Q&A: How To Choose the Correct Replacement Axle for an R&R Snowmobile Trailer
- Q&A: Bolt Hole Measurements On BTR E-Z Lube Spindle Brake Flange
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Can I Replace a UFP A-70 Surge Brake Actuator w/ the Replacement Inner Member for Dexter DX7.5L?
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Determine Tire/Wheel Diameter
- Article: How to Measure a Trailer Axle
Jameson C.
2/3/2026
Hey Shawn, how did things go with replacing the spindles and brakes on your Apache Royal camper? Were the new spindle and brake assemblies a good fit for your setup? Your update could make it easier for others restoring older campers.