Replacement Idler Hub For a BTR Spindle On an Enclosed Trailer
Updated 09/26/2022 | Published 07/13/2022
Products Featured in This Question
Question:
I have the measurements so if you could help me determine what replacement hubs I need to purchase I would appreciate your assistance. Spindle diagram: A - 1.50" B - 1.05" C - 1.04" D- .99" E - .95" F - 17/32nd" 5 Lug Bolt Pattern - 4 1/2" Bearing Inner Diameter - 1.06" Bearing model # L44649 Max- 1 Hub Outer Diameter - 2.46" Hub Inner Diameter - 1.97" Race Outer Diameter - 1.97" Seal Outer Diameter - 1.66" Seal Inner Diameter - 1.00" Also I could not find a cotter pin when removing the hub, I simply had to use a screwdriver to loosen the spindle nut. In addition for your reference I included pictures of the spindle the info stamped on the inner rim. Thanks.
asked by: Brain B
Expert Reply:
You will need 2 of the Easy Grease Trailer Idler Hubs # AKIHUB-545-2-LFEZ-2K for your trailer hubs. This hub fits on your Spindle # TRU27FR and will include new bearings, races, a grease seal, grease cap, and new lug nuts.
As you have an EZ grease spindle you will not have a cotter pin. Instead you will have a Tang Washer # 5-101 that holds on the Castle Nut # 165686 and Washer # 5-23.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: spindle nut
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: ez lube spindle washer
- Search Results: k71~390~00
- Shop: Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Topwind - 10-5/8" Travel - 7,000 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: spindle washer
- Shop: Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: Timken Replacement Bearing and Race Set - L44649 and L44610
- Video: Detailed Breakdown of the BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles
- Q&A: Where are Timkin Bearings Made?
- Article: Most Popular Wheel Bearings
- Search Results: timken bearing for dexter 3500 lb axles
- Video: Remove and Reinstall a Trailer Hub Review
- Video: An In-Depth Look at the Easy Grease Trailer Hub and Drum Assembly for 2K Axles
- Video: Square #84 Spindle for 3,500-lb Trailer Axles: The Breakdown
- Search Results: #84 spindle
- Search Results: kenda trailer tires and wheels
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Video: Detailed Breakdown of the Easy Grease Trailer Hub and Drum Assembly
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Q&A: Replacement Bearing Kit for a 3,500 lbs DeeMaxx Disc Brake Kit w/ a 10" Rotor
- Q&A: Best Replacement for a Dexter 69 - 46 A2 Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Disc Brake Kit Recommendation for 3,500 lb Axle and 5 on 4-1/2" Bolt Pattern Idler Hub
- Q&A: Replacement Oil Seal for 2000 Ranger Bass Boat Trailer Model R8L