Recommended Trailer Tire And Wheel Combo For A Jayco Popup
Updated 04/26/2022 | Published 04/25/2022
Products Featured in This Question
Question:
Need help putting larger wheel/tires onto a vintage Jayco popup.
asked by: Kevin R
0
Expert Reply:
When it comes to upgrading your 4.80-8 tire to a 4.80-12 the width of the tire and bolt pattern will be the same so it can be switched. The difference is height is 4.6 inches.
I recommend The Kenda 4.80-12 Bias Trailer Tire with 12 inch Galvanized Wheel - 4 on 4 - Load Range C # AM30630. This tire has a ply rating of 6 and has a maximum load of 990 pounds at 90 psi.
I attached a review video link below.
expert reply by:
Noah E
0
Product Page this Question was Asked From
BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-5/16" Diameter
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L44649
- 1-5/16 Inch Diameter
- Round
- For 2500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What are the Diameters of the CE Smith Spindle Axle CES38WR?
- Q&A: New Brake Assemblies, Hub/Drums, Brake Lines, and Bearing Buddy for Trailer with 3,500 lb Axle
- Q&A: Does Hub Face Diameter Matter?
- Q&A: Is A ST205/75R14 Tire The Modern Equivalent Of A F78-14ST Tire?
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Is There a 14 Inch Diameter Tire That is Also a Load Range E or Higher
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Lighting Requirements