See what our Experts say about this Optronics Trailer Lights

• How to Remove the Lens on Optronics RV Tail Light # RVST60
  On RV Tail Light # RVST60 there are tabs on the sides that you can manually press in/pry on gently to release the lens from the base. A small flat blade screwdriver would work well for this. The plastic base is too strong to push in with just your fingers so a tool of some kind will be needed. Once you get one side loose and off you can pull the lens off with relative ease.
  view full answer...
• Replacement Taillights for 2015 Coleman Clipper
  I wasn't able to get a totally perfect shot of your 2015 Coleman Clipper online but it does look like the # RVST61 is the correct drivers side assembly or for the passenger side # RVST60. We have replacement lenses for these too as part # AST60B but the clips of the base of the light are not replaceable as they are part of the base.
  view full answer...
• LED Light Upgrades For a 2018 Forest River Flagstaff Micro Lite 21DS
  Based on images I could find for your 2018 Forest River Flagstaff Micro Lite DS21 I see it has the Tail Light # RVST60 and # RVST61 but with a black base. We do have the LED Tail Lights # RVSTLB60 and # RVSTLB61 which are a similar shape with LED lights and the black base. I'm a little confused when you say the colors don't line up and reflectors are on the wrong side. With these lights they have reflectors built into the lens. The Light # RVSTLB61 does mention drivers side but you are...
  view full answer...
• Replacement Lens for RVST60 and RVST61 Optronics Lights
  For a replacement lens for the # RVST60 you would need the part # AST60B. For the part # RVST61 you would need the part # AST61B.
  view full answer...
• Wire Colors and Functions for the Incandescent RV Tail Light Part # RVST60
  In regards to the Incandescent RV Tail Light part # RVST60, the white wire is for the ground, the black wire is for the tail light, and the green wire is for the right hand stop/turn signal. The wires on your trailer should be white for ground, brown for tail light, and green for right hand stop/turn signal. However, in order to be certain you will need to test for function with a circuit tester. In order to do this you will need to isolate the three wires you have on the trailer, apply...
  view full answer...
  
• What is Difference Between Optronics Trailer Lights # RVST60 and # RVST61
  The part # RVST61 is the driver side light that has the license plate bracket and light built into it. The part # RVST60 would be the passenger side light does not have either of those things.
  view full answer...
• How to Remove Tail Light Lens On Shorelandr Boat Trailer
  I am not sure of the exact model tail light assembly that is installed on your Shorelandr Boat Trailer, but there should be mounting screws that need to be removed in order to separate the lens. If you do not see any screws, it may simply be a snap-on lens. In order to remove this type of lens, you should be able to use a small flat head screwdriver to gently pry it up. Just be careful not to slip and scratch or damage the lens. If you are still having trouble, please let me know what...
  view full answer...
• Replacement Taillight for Rockwood Freedom 2318G Trailer
  Thanks for the photo, and based on that it looks like you have the Optronics RV Tail Light - Driver's Side # RVST61 and Passenger's Side # RVST60. To ensure you want to measure, as these both measure 8-5/8" long x 3-3/16" tall x 2-1/4" deep. If that is the right one, the correct replacement lenses are - Driver's Side: Replacement Lens # AST61B - Passenger's Side: Replacement Lens # AST60B If you have a different measurement let me know but I'm confident this is what you have.
  view full answer...
  
• Replacement Tail Light for a 2005 Shorelandr Trailer
  Thanks for the picture! I went to the Shoreland'r website and found that there is no exact replacement for the light from your 2005 Shorelandr trailer lights. They've upgraded to LED lights. I have a great set of LED's for you that are a better option than what Shoreland'r is recommending and they will not only save you money now but down the road. LED lights last 5-6x as long as incandescent builds and use a fraction of the energy. I recommend the Wraparound LED Tail Light drivers side...
  view full answer...
  
• Is There a RV Tail Light with License Plate Bracket For Passenger Side In White
  The RV Tail Light with License Plate Bracket is offered in both black as part # RVSTB61 and white as part # RVST61. These are for the driver side which is where the license plate should be attached but it could be used on the other side if needed. The matching tail light would then be the RV Tail Light part # RVSTB60 for black or part # RVST60 for white.
  view full answer...
• Replacement Tail Lights for a 1981 Palomino Pop Up Camper
  The first thing to look at is the size of the Bargman tail light # 30-92-002 and how it compares to the existing lights on your 1981 Palomino pup. The Bargman light is 8-9/16" long x 4-9/16" wide x 2-1/8" thick. The wiring on this light may seem a little confusing but I can explain it. The two white wires are ground wires and will need to attach to a clean, bare metal surface. The black wire is for brake lights and turn signals. Green is for running lights. That leaves the red wire for...
  view full answer...
• Low Profile Combination Light With Black Base For Passenger Side Of 2014 Rockwood 5Th Wheel
  We do offer the same light as the # RVST60, with a black base as you requested. The light is part # RVSTB60. I called my contact at Optronics and they gave me the dimensions for this light. I have attached a photo of the light with the dimensions noted.
  view full answer...
  
• Replacement Taillights for 2006 jayco Jay Series 806 Pop Up Camper
  From online photos I've seen, the # RVST60 passenger side taillamp looks like the correct replacement, although I can't definitively confirm that because there isn't a good resource that tells us what particular lamp is used on which camper. The lamp measures 8-5/8 x 3-3/16, so it that's a match for yours, this would be a compatible lamp. For the driver's side, part # RVST61 is used.
  view full answer...
• Replacement Taillights & Light Lenses for 1995 Cobra Sandpiper 5th Wheel Trailer
  Trailer makers do not keep detailed specs on smaller items such as the lights they install, and for a 5th wheel trailer that is 21 years old the original light's maker may no longer be around. But you can check for a part number that will help your search by removing the light's base from the trailer. Most often the manufacturer name/part numbers will be found on the light's base, rather than on the lens. I researched photos of your Sandpiper and I note that the rectangular lens is mounted...
  view full answer...
• LED and Incandescent Trailer Tail Lights with License Plate Bracket
  For an LED trailer tail light with license plate bracket we have # RVSTL61 and # RVSTLB61. For incandescent we have the following: # 30-92-003 # RVST56 # 30-92-108 # 30-92-004 # 30-92-109 # RVST61 # RVSTB61
  view full answer...

Do you have a question about this Trailer Light?