Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
(287 reviews)
Price: $11.86
In Stock
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
Item # GS-2125DL
Our Price: $11.86
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (287)
- Q & A (0)
- Photos
etrailer Trailer Bearings Races Seals Caps - GS-2125DL
- Seals
- Grease Seals - Double Lip
- etrailer
Trailer Hub Grease Seal
Features:
- Double lip seal
- Double lip seals retain the grease inside the hub and exclude water and road grime better than single lip seals
- Replacement for single lip seal 10-1
| Seal Cross-Reference | ||||
|---|---|---|---|---|
| Dexter # | Transcom # | National # | NOK # | Chicago Rawhide # |
| 010-010-00 | 21333VB | 440972 | AF7172E1 | 21352 |
| Inner Diameter (ID) | Outer Diameter (OD) | Thickness | Use With: |
|---|---|---|---|
| 2.125" | 3.376" | 0.31" | Dexter 5,200 - 7,000 lb |
GS-2125DL Double Lip Grease Seal - Replaces Single 10-1
Replaces DL-2125-03, DL2125-00, DL-2125-53
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL - GS-2125DL
Average Customer Rating: 4.9 out of 5 stars (287 Customer Reviews)
Trailer Hub Grease Sealby: Paul 10/13/2022
This seal fit my particular axel, and was an easy installation. A caution: There are two different I.d.s required for 7K axles. One is 2.125" I.D. the other is 2.250" ID. I had to measure the axel then place my order, but I'm sure there is a way to determine prior to disassembly when ordering using serial #.
by: Daniel 03/05/2024
Punched in part number. Came rite up and got them 2 days earlier than they said. Thank you . This is why I enjoy using Etrailer for my camper and race car trailers
by: David 02/23/2024
Prompt delivery of my order. Exactly the correct part. After repacking the bearings, 5th was pulled, 4000 miles last year.Thanks for your service.
by: Michael 05/09/2024
Worked as advertised, no issues.
by: Scott07/27/2019
The Seal Fit perfectly in my ’69 Dexter Axle Mobile Home Hub
Scott S.
7/28/2020
The bearings I purchased for my 1969 mobile home axle that I use on my log slitter are working flawlessly.
by: Dave 04/13/2024
Fit and work as expected.
by: Dennis B05/02/2024
Great customer service. Shipping was qu ick.
by: James07/27/2023
Perfect fit. Easy to install, I recommend buying extras just incase in gets tweaked or bent during installation or removal. My seal removal tool bent the seal up too bad to use again.
by: Steven10/28/2023
Proof is in the pudding, but I don't see any reason why these seals should not work well.
by: Chris07/24/2023
It took 12 days from order date to delivery day. Same thing with trailer lights before. I bitched and they said I should have had it shipped a quicker way. How about sending it faster instead of blaming usps. Never again waiting for the junk.
by: Nigel 08/31/2023
Perfect fit and rolling with my fifth w heel
by: Bryan 03/29/2024
always great service.
by: Leroy11/21/2023
the install was easy and they are holding up just fine. Not used many times but so far all is good.
by: Bill Harrington02/11/2020
The parts were all the right ones and most were Dexter oem parts. The only problem I had was putting the bolts in the frame end of the spring perch. It was easier to take the spring loose from the axle, put the bolt in ,then bolt it back to the axle. I intend to buy all of my future trailer parts from etrailer.
by: Roger12/28/2023
Great service!
by: TimBD07/16/2017
I have nothing but good things to say about the seals, and working with etrailer. George is one of the few folks in this business who reaches out to make sure customers are satisfied. The seals were exactly what I ordered, arrived as promised, and are good quality seals.
I have owned boats for 35 years, and trailer to the river to boat, and have now owned 5 different boat/trailer sets. In that time, I have never found a wheel seal that actually prevents water from getting in. I have every type of bearing buddy, have packed marine grease in against the bearing buddy springs...nothing works. So, being able to get these seals supports my yearly ritual of popping the wheels off every year, cleaning everything up, replacing bearings as needed, and off we go. It is the price of boating, and prevents being the guy along the freeway with the family in the car and smoke rolling out of the wheel.
Thanks, George, for being a connected and caring dealer. You are the last of a dying breed. You have won my business for life.
Tim B.
7/16/2018
Seals are working as expected ... they dont keep the water out, but Ive never met a seal that did :-. The double lip does slow the flow down a bit. Good seals, good price.
by: Rick M.03/28/2017
I've got about 12,000 miles on my new Rockwood Windjammer 3029, so it's time to remove, inspect, clean and repack my wheel bearings. This requires new rear seals, so I ordered them thru etrailer. Package came in sooner than expected, and was in good shape. The rear grease seals look identical to the "Dexter" stamped seals that came on the trailer, except for the Dexter name and logo. They installed just as expected, and now I'm ready for the next 12,000 miles.
Rick M.
3/28/2018
after one year, seals are still performing as expected, no problems.
by: Jackie02/09/2023
I have several trips since installation and have had no problems.etrailer sent correct parts in reasonable time. Good service.
by: Patrick 02/05/2023
Diana did a great job helping me cross reference the seal number I had. The 4 seals arrived within a day (helps that I live in Missouri). We will see how they hold up in my 5th wheel travel trailer!!
Thanks
by: Perry 04/17/2023
Perfect match love etrailer knowing they have parts for my camper and delivery is fast will continue to order from them.
by: Den 09/17/2023
Product arrived in record time, and it’s just what I needed.
by: William 07/24/2022
Always like ordering from etrailer they seem to always have what I need when needed. Quick delivery with no complaints.
by: Glen 08/27/2023
Good product
by: Roger A.10/13/2016
I have a boat trailer that requires wheel bearings and seals periodically. It is 20 years old but I easily found replacements at etrailer.com. I bookmarked the parts so I can get them easily next time. Noticed that the original bearings were made in England, the recent ones are made in China and are of equivalent excellent quality. Delivery was prompt, packing very good.
Good retailer.
by: Paul 08/11/2023
Fast delivery. Easy ordering
25
287
Show More Reviews
See what our Experts say about this etrailer Trailer Bearings Races Seals Caps
- Most Common Bearing Kit for 6K Trailer AxleThe most common bearings on a 6K axle are inner bearing part # 25580 and outer bearing part # 15123, along with either grease seal # GS-2250DL (2.250-inches inside diameter) or # GS-2125DL (2.125-inches inside diameter). Please refer to the linked article for more on trailer bearings and kits. We have bearing kits with these parts combinations. Kit # BK3-100 has the larger seal and kit # BK3-110 has the smaller seal. Kit # BK3-200 that you referenced is typically used for 7K axles and...
view full answer... - Hub and Drum Assembly with Inner Bearing 1.75 ID and Outer Bearing 1.25 IDThank you for providing the inner diameter of the two bearings; that is especially helpful when trying to determine which replacement parts are going to work. Even though we can confirm the bearings are a fit, you'll also want to make sure that the grease seals on any hub/drum assembly, as well as the races are a match for your. I'll also take this opportunity that while mobile home axles are cheap and readily available, they're really only designed to be used the one time and then discarded;...
view full answer... - Can Hydrastar Disc Brake Kit for 7k Axle Fit 7k Trailer Axle6k and 7k trailer axles are almost all the exact same so if you have a Dexter 6k axle the spindle of it would be compatible with the # HSE7K-T1 that you mentioned but you'd want to make sure the seal surface of the spindle is 2.250 inch and not 2.125 inch as that's sometimes an issue. But even then the worst case scenario is you'd just need to swap seals with part # GS-2125DL and you'd be set.
view full answer... - Grease Seal Needed for Dexter Hub Marked 8-201The hub you have based on the numbers you mentions is the # 8-201-9UC3-EZ which is a 6,000 lb axle hub. The grease seal needed then is the # GS-2125DL you mentioned.
view full answer... - Replacement Bearings, Races, Seal, and Studs for Trailer Hub 008-479-05The stud replacement you need for the 008-479-05 is the part number # K12WB2. The seal you need is # GS-2125DL, bearing # 14125A, race # 14276 and bearing # 25580 and race # 25520.
view full answer... - Should It Take a 14oz Cartridge To Fill Trailer HubI honestly don't see how it's physically possible to pump a whole 14oz tube of grease into a single hub, especially when your trailer is only a year or two old. Grease seals are notorious for blowing out the back of the hub which is why the EZ Lube spindle setup is nice but dangerous. I definitely recommend pulling your hub to check on the seals. If the seals blew (most likely) you're going to have grease on your brakes which will be rendered useless until you get it all cleared off and...
view full answer... - How To Choose Correct Grease Seal for Sundowner Trailer with 5,200 lb AxleThe two most common grease seal options for a 5,200 lb axle are part # GS-2125DL and part # GS-2250DL. The two seals have the same O.D. but different I.D. The former is 2.125" and the latter is 2.250". You'll need to measure to determine the correct fit.
view full answer... - What Grease Seal is Needed for Trailer Hub with Bearing Numbers LM67048 25580For that bearing combination there are two grease seal options that are possible. For whatever reason the 5.2k to 7k axles kind of randomly either will have a 2.125 inch inner grease seal requirement like the part # GS-2125DL or 2.225 inch like the part # 10-36. There is no way to know for sure what you have without measuring so you would need to measure the outer diameter of your spindle where the seal rides to know.
view full answer... - Replacement Brake Kit For Deemax 12 Disc Brake Kit Severe CorrosionWith the severe corrosion on your DeeMaxx Disc Brake Kit # DE28YR you will most likely want to move to stainless steel components. We do offer the Maxx Coat Rotors/Stainless Calipers # DE58YR which is a more price conscious upgrade. Otherwise if you want to go fully stainless you will need the Stainless Steel Kit # DE54VR along with 2 Stainless Steel Idler Hubs # KH42655S. These hubs will need the Inner Bearing # 25580, Outer Bearing # 15123 and a Grease Seal # GS-2125DL to be complete...
view full answer... - Bearing Dimensions for 15123/25580 Bearing KitThe bearings that come in the Bearing Kit # BK3-110 have the following part numbers and dimensions (outer dimension is with the matching race installed): - Inner Bearing # 25580 - ID 1.750" and OD 3.265" - Outer Bearing # 15123 - ID 1.250" and OD 2.441" - Grease Seal # GS-2125DL - ID 2.125" and OD 3.376"
view full answer... - Recommended Electric Trailer Brakes For 6,000LB Boat Trailer AxleYou can install electric brakes on a boat trailer but it is not recommended to use the electric brakes when they get submerged in the water. The Electric Trailer Brake Kit # AKEBRK-7-D has a Dacromet coating for superior corrosion resistance due to being submerged in water. If this is the route you choose you will need to ensure your hub is okay to use with electric brakes. Or we have the Galvanized Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-G-EZ-K. The best route would be...
view full answer... - Replacement Seal for Lippert 5,200 lb Trailer AxleYou will want to measure your spindle to make sure (see accompanying photo) but the double lip grease seal that fits Lippert axles that are rated for 5,200 lbs - 7,000 lbs is # GS-2125DL. If you look at the photo you will want to use a digital caliper such as # PTW80157 to measure where the letter "B" is on the spindle; that will be the inner diameter of the seal. If yours measures 2.125 inches then # GS-2125DL will be the correct seal for you. On occasion your axle will have an inner...
view full answer...
- Does Spindle Get Lubricated With Grease When Installing Grease SealYes, when installing Grease Seal # GS-2125DL you do want to put some grease on the spindle to help the seal slide on. If you go to about the 1:35 mark of the linked video, you can see our installer doing exactly this. For this I recommend the LubriMatic LMX Industrial Strength Grease # L11390; a compatible grease gun is the LubriMatic Standard-Duty, Lever Action Grease Gun # L30200.
view full answer... - Which Bearing Kit Will Fit The Dexter 6,000LB Axle # 7461121-EB? You are correct the Bearing Kit # BK3-110 does contain the correct bearings, races and grease seal for the Dexter Axle # 7461121-EB. But this does use the Spindle Nut Kit # RG05-100. You can order all the parts separately if you wish so you do not have extra parts you won't need. All of the components below will fit one hub. Inner Bearing # 25580 Inner Race # 25520 Outer Bearing # 15123 Outer Race # 15245 Grease Seal # GS-2125DL Washer # 5-23 Nut # 6-191 Retainer # 6-190
view full answer... - Replacement For T-23973 Grease Seal on TrailerFrom what I have found, your T-23979 is the same as the Dexter 010-010-00 seal. This has a 2.125" inner diameter and 3.376" outer diameter. The correct replacement would be the Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL # GS-2125DL. I recommend measuring your existing grease seal to verify this information.
view full answer... - Replacement Hub Seal for Trailer with 5,200 lb AxlesSince your axle has a 5,200 lb capacity the correct replacement seal would be the part # GS-2125DL.
view full answer... - How to Choose Correct Replacement Grease Seals for Trailer HubSome generic grease seal parts are listed below for various axle capacitates, but the best route is to find the part number on your existing grease seals. If you have a hard time with that then the next best thing is to use a digital caliper to measure the inner and outer diameters of your grease seals and then choose a replacement from the linked selection that matches what you found. 2K Axle - # 34823 (Qty 1) 3.5K Axle - # RG06-050 (Qty 2) 5.2K Axle - # RG06-070 (Qty 2) for 2.250" OD...
view full answer... - Replacement Bearings For A Dexter 2200 Pound P12 SLR Axle SN: D5860714When it comes to replacing bearings on your Dexter 2200 pound P12 SLR axle SN: D5860714 per Dexter the inner and outer bearing number is # LM67048. Then you would need The Race # LM67010, and The Grease Seal # GS-2125DL We do not sell a kit with all the pieces together. I attached a review video link below.
view full answer... - Picking Out Replacement Grease Seals for 7,000 lb Trailer AxleTake your hub off of your axle and measure the diameter of the spindle where the seal rides. If that dimension is 2.125 inches you need the seal part # GS-2125DL or if it's 2.25 inch you'd want the seal # GS-2250DL.
view full answer... - Picking Out Replacement Hub Seal for Trailer Hub with 6 Lug Bolt PatternSince it's a 6 lug bolt pattern you most likely need the seal part # GS-2125DL but you'll need to verify this by pulling off a hub and measuring the diameter of the spindle where the seal rides. If it's 2.125 this is the seal or if it's 2.25 you'd need # GS-2250DL. If for some reason it's not one of those two diameters let me know and I'll see what we have that would fit. I'll also need the bore diameter on the hub where the seal installs as well in this case.
view full answer... - Availability of 8 on 6-1/2 Hub and Drum Assemblies for the Timbren Axle-Less Suspension ASR35HDS02We do have some hub and drum assemblies that you can use with the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS02 which have an 8 on 6-1/2" bolt pattern. Our Trailer Hub and Drum Assembly # AKHD-865-7-2-EZ-K has a 12" diameter and comes with the needed bearings and grease cap for your application. It does come with a grease seal, but you will need to use part # GS-2125DL (Qty 1) or part # RG06-090 (Qty 2) for the correct seal for the smaller spindle. If you don't already...
view full answer... - Bearings and Seal for Replacing UFP Dexter 41062 Hub with Kodiak Hub and RotorI spoke with my contact at UFP Dexter and he said that your 41062 hub uses inner bearing 031-030-02, outer bearing 031-032-02, and seal 010-181-00. This is the equivalent of inner bearing # 25580, outer bearing # LM67048, and grease seal # GS-2125DL which can all be found in the bearing kit # BK3-310 along with the races for the bearings. Unfortunately the bearing kit # DBRKHW85G that you purchased isn't the same as the grease seal has a slightly larger diameter but that can easily be fixed....
view full answer... - Replacement Bearing Kit for 5,800 lb Lippert AxleWhat is the axle capacity that you have? We don't have an easy way to look up what you have with the info you listed but if you get me the axle info I can see what you may need.
view full answer... - Galvanized 6 Lug Trailer Hub For a Spindle With 2.125 Grease Seal and 1.75/1.25 Bearing SizesIf you are only needing an idler hub we have the DeeMaxx # DE96VR which you will need to combine with the Bearings # 25580, # 15123, Grease Seal # GS-2125DL and either a standard Grease Cap # F001520 or EZ Lube Cap # DC250L-DCRP. For a hub/drum assembly we have either the EZ Lube Hub/Drum # AKHD-655-6-G-EZ-K or Standard Hub/Drum # AKHD-655-6-G-K. Both of these will require you to switch the grease seal to the Seal # GS-2125DL which fits your spindle.
view full answer...
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
Updated by:
Leah B
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Matthew E
Updated by:
Manda E
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Paul
10/14/2023
Seals still working per design no leakage.