Bearings and Seal for Replacing UFP Dexter 41062 Hub with Kodiak Hub and Rotor
Updated 08/07/2020 | Published 02/11/2019
Products Featured in This Question
Question:
I have a marine trailer with ufp hubs 41062 and just bought kodiak hub KHR1389D and this bearing set DBRKHW85G first off will this work to replace my current hub? And also do I need races for what I have bought ?
asked by: Samuel N
Expert Reply:
I spoke with my contact at UFP Dexter and he said that your 41062 hub uses inner bearing 031-030-02, outer bearing 031-032-02, and seal 010-181-00. This is the equivalent of inner bearing # 25580, outer bearing # LM67048, and grease seal # GS-2125DL which can all be found in the bearing kit # BK3-310 along with the races for the bearings. Unfortunately the bearing kit # DBRKHW85G that you purchased isn't the same as the grease seal has a slightly larger diameter but that can easily be fixed.
If you are wanting to use the Kodiak 13" Hub and Rotor # KHR1389D on your current setup though all you need are the grease seals # RG06-090 which have the smaller inner diameter and the races # 25520 and # 02420. Please note that this hub and rotor has an 8 lug pattern whereas your current hub has a 6 lug pattern.
Please note that you'll want to make sure that what you do to one side of your axle that you do to the other side of your axle so that you have the safest ride possible and to reduce uneven stress on your suspension.
Product Page this Question was Asked From
Bearing Kit for Trailer Brakes with 13" Hub/Rotor and 5/8" Bolts - Grease - 7K to 8K
- Accessories and Parts
- Trailer Hubs and Drums
- Bearing Kits
- 7000 lbs
- 8000 lbs
- Bearing 25580 and 02475
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Grease Cap for Dexter/Tie Down Engineering Vortex Trailer Hubs
- Shop: Replacement Guide Bolt for Kodiak Calipers - Stainless Steel
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 9/16" Bolts - 7,000 lbs to 8,000 lbs
- Q&A: Replacement Sleeve for Kodiak Model 250 Caliper
- Q&A: Kodiak Caliper-Mounting Guide Bolt Replacement Sleeve for Model 250 Caliper
- Video: Review of DeeMaxx Replacement Caliper Bolt and Sleeve Assembly - DE85FR
- Video: In-Depth Review of the Replacement Sleeve for Kodiak Caliper-Mounting Guide Bolt
- Search Results: bearing buddy
- Shop: Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Shop: Kodiak Ceramic Brake Pads - 7,000 lbs to 8,000 lbs
- Shop: Replacement Grease Cap for Kodiak 7,000-lb, 7,200-lb, and 8,000-lb Disc Brake Kits
- Shop: Dust Cap for Kodiak Disc Brake Kit
- Search Results: hba cam
- Video: In-Depth Review of the Replacement Mounting Bracket for Kodiak Disc Brake Caliper
- Search Results: f2 jack
- Search Results: 12200
- Search Results: junction block
- Shop: Trailer Wiring
- Search Results: 3073
- Search Results: 40930
- Q&A: Should Caliper Guide Bolts of Kodiak Disc Brake Kit Touch Brake Rotor
- Video: Best Brake Actuator Options
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: All You Need to Know About the Kodiak Disc Brake Kit
- Q&A: How to Identify Correct Replacement Bearings and Seals for Boat Trailer
- Q&A: Recommended Disc Brake Conversion Kit for 5200-lbs Lippert Axles with 6 on 5-1/2 Bolt Pattern
- Q&A: Recommended Hydraulic Trailer Brake Lines and Hoses
- Q&A: Replacement Brake Line Options for a Tracker Boat Trailer
- Shop: Trailer Hitch
- Shop: Suspension Enhancement
Eddie S.
7/29/2020
Hello, I have a UFP 41062 hub that has a 2.125 x 3.371 x 0.500 oil seal, what would be the part number for that seal and what type of oil lube would I use? Thanks