Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair)
(158 reviews)
Price: $39.40
In Stock
Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair)
Item # BB2441
Retail:$67.00
Our Price: $39.40
You Save: 41%
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (158)
- Q & A (0)
- Photos
Bearing Buddy Trailer Bearings Races Seals Caps - BB2441
- Caps
- Bearing Protector Grease Cap
- 2.441 Inch
- Bearing Buddy
Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub.
Features:
- Replaces the grease cap in the axle hub
- Prevents wheel-bearing failure
- Keeps water and dirt out of hubs and bearings
- Allows boat trailer wheels to be completely submerged
- Stops corrosion and pitting on bearings
- Provides easily accessible grease fitting
- Makes adding grease to the bearings quick and simple
- Maintains slight, controlled pressure (3 psi) with spring-loaded piston, preventing water from entering hub
- Prevents overfilling and rear seal damage with automatic pressure-relief feature
- Grease seeps around piston edges and into barrel when full
- Constructed of stainless steel internal parts and triple-chrome-plated steel barrel
- Ensures longer-lasting fit than plastic or aluminum products
- Includes rubber covers
- Installs easily
- Made in the USA
Specs:
- Fits 2.441" hub bore
- Works with outer bearing models LM-67048 (hub counterbored), 15123 and others
- Works with outer bearing cup (race) models LM-67010 and 15245
- Commonly found on 4,400-lb, 5,200-lb, 6,000-lb and 7,000-lb Dexter axles (counterbored)
- Lifetime warranty
Bearing Buddy Operation
Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub. To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8".
The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel and diluting the grease.
An automatic pressure-relief feature is built into the Bearing Buddy. When the device is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.
You can manually check the grease level in your Bearing Buddy by pressing on the edge of the piston. If you can rock or move the piston, the hub is properly filled.
42441 Bearing Buddy Model 2441 - Chrome Plated (Pair)
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair) - BB2441
Average Customer Rating: 4.8 out of 5 stars (158 Customer Reviews)
Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub.by: Marvin I03/30/2024
These are the BEST hands down! The originals, a must have if you want to keep your axles in optimum dependability. Easy to install, easy to service, and peace of mine knowing the bearings are greased. Great customer service and knowlageable help with getting the correct size.
by: Jack12/15/2022
Bearing buddies look better than what I have
by: Gerald 04/21/2024
Great product, easy installation.
by: Robert 02/03/2024
Bearing Buddy fit perfectly. Made in the USA still means something!
by: Richard06/25/2019
Ordered these for my 5th wheel trailer 8 days before vacation. They were shipped and received with 3 days to spare. Installation was flawless. Thanks etrailer. Well done!
Richard
6/26/2020
Just started our camping season. Pulled the caps off, hooked up the grease gun, pumped some grease and done. Took longer to write this then grease. No pulling the 4 tires to get to the bearings and getting my hands greasy.
by: George N11/18/2013
Your product arrived on time and undamaged. It installed exactly as described in the literature. I am very pleased with my new Bearing Buddy's. As a side note I noticed a small amount of chrome machining debris inside the hub of the housings. It was easily cleaned out with a rag before installation. These Bearing Buddy's are installed on a 32 year old utility trailer I am refurbishing. Although the trailer is small (4 x 8) it has a 5000# axle and has seen some pretty tough use. Ive attached a pic of the trailer undergoing refurbishment along with a couple of pics of the installed Bearing Buddy's. Excellent product and service!
by: David 05/18/2024
Alex spoke English and was knowledgeable about what I needed
by: Michael02/28/2013
This product is as good as their rep have used them before on a
boat trailer never had a bearing go out as long as I used the
buddy bearings they are great! Service was just as good.
These bearings were installed on a heavy duty low boy trailer.
No pictures trailer is in South Texas about 300 miles from my location. Hauling oil field equipment. Picture of the trailer being
overhauled before new fenders were added.
by: Timothy 02/24/2024
Product as advertised, shipping speed was not fast but reasonable I think, shipping charge was very reasonable
by: Lee 02/06/2024
These buddies have the correct depth and the slip on contact area is not chrome so the buddies holds tight.
by: Dylan04/20/2023
Work great, have absolutely no problems with these bearing caps. Work much better than the etrailer brand caps I ordered at the exact same time for my other trailer.
by: James 04/14/2023
Great product but I always have issues with the rubber caps coming off once they get a year or 2 of age on them,
by: Jason 10/23/2022
Great for, I didn’t realize I had the ez lube axles and didn’t need these. I really like the covers better than the cheaper ones. I removed the inner zero assembly so I can use these as caps. Much thicker material and better looking.
by: Kevin09/26/2022
Bearing buddies showed up with one missing, emailed CS and they shipped out two more! Emailed back that I only needed one and to send me a RAN.
Great experience and will use etrailer for further purchases.
by: Virgel07/08/2021
They fit perfect. Took a 5000 mile trip this summer and was glad I had the option of applying grease to the bearings.
Virgel
7/10/2022
Still working a year later however a side note. Do not over grease as it will leak onto the inside of the drum and prevent the brakes from grabbing.
by: Donald T03/17/2016
Nice item and very easy to install, trouble free traveling.
by: Bill F09/08/2017
Lost one cap and the old ones were from a 2000 trailer. Working fine. good product.
Bill F.
9/8/2018
no problems, have traveled locally and to different states.
by: Bob07/13/2017
While we only just received out bearing buddies. They are as described and installed easily. The only trouble was the beauty covers don't fit over the hubs any longer. Doesn't really matter as the product is attractive. The wheel studs not so much but we can live with that.
I will have to write another review after we have taken a few trips and greased things up a bit.
by: Steve W04/25/2017
I recently upgraded to electric over hydraulic disk brakes from the hydraulic drum surge brakes that were on my boat trailer when I bought it. I scoured the web site and put together a list of parts for the conversion but still had a few questions. Lisa was most helpful and had some additional suggestions. She made my etrailer.com shopping experience the best online shopping experience ever. Once I had the brake parts I found my old Bearing Buddies didn't fit the new hubs so I ordered new Bearing Buddies and new coupler while I was at it. I ordered them on Sat. and they arrived today, Tuesday. I already have the new parts on and they are working perfectly. Thanks etrailer.com and thanks Lisa. You have a new customer for life.
by: wayne w.09/04/2015
they came in the mail when you said they would. they were exactly what i wanted, and they fit perfectly. you people know what you are doing. if i need anything else that etrailer sells, i will surely order it from you
wayne w.
sampson city,fl
Wayne W.
9/5/2016
the protectors are fine, but the rubber covers have disappeared. i pushed all the air from them when i put them on. do you sell them seperately? other than that i am happy with them. thanks wayne
Rachael H.
9/7/2016
Thanks for the follow up and reply. We do indeed have the replacement covers that you are looking for, and those are part # BB23B.
Helpful Links
by: Doyle C.10/06/2019
Putting off greasing wheel bearings is so easy to do. Bearing Buddies make greasing wheel bearings easy because they give incentive. Only takes 5 minutes vs a couple of hours. Being on the side of the road with a break down from bad bearings isn't fun and totally preventable.
by: Keith01/01/2018
These work great. Only issue is two of rubber covers have fallen off and lost!
Mike L.
1/2/2018
Sorry to hear that! We do offer replacement covers as part # BB23B. Heres a little trick to keep the covers in place. Make sure the outside of the bearing buddy and the inside of the cover are perfectly clean and free of grease, then spray a quick shot of aerosol hair spray on one side of the bearing buddy. Install the cover, and rotate it on the bearing buddy by about 1/4 turn. When the hair spray dries, itll act like an adhesive but because you havent coated the whole thing, youll be able to remove it when needed.
Helpful Links
by: RayB06/02/2016
I put 4 of these on my 26' fifth wheel. The installation was very easy and exactly as described. I tapped them gently with a hammer to get them started and then used a block of wood and hammer to seat them fully for a nice tight fit.
by: Kevin 10/05/2022
Products were just as described. Fit perfect and instructions were very helpful. Shipping was fast. Perfect transaction.
by: Bryan11/20/2018
I work as a fisheries biologist for a state agency and travel hundreds of miles every week with my boat. These bearing buddies and other bearing products have worked great and were a huge upgrade over other trailer hub products I've had in the past. So far no issues.
25
158
Show More Reviews
See what our Experts say about this Bearing Buddy Trailer Bearings Races Seals Caps
- Installing Bearing Buddy Bra # BB23BAs a first step, make sure you are using the correct Bearing Buddy Bra for your application. The # BB23B you mentioned is sized to fit Bearing Buddies that fit hub bores ranging from 2.240 inches to 2.562 inches, or model #s BB2328, BB2328SS, BB2441, BB2441SS, BB2717, BB2717SS, BB2562, BB2562SS, BB2240 and BB2240SS. Applying a very very small bit of grease (I am talking tiny) to the outside of the Bearing Buddy will allow the bra to slide on easier. While sliding the bra into place, any...
view full answer... - Do Bearing Buddy Bearing Protectors Protect Both Inner and Outer BearingsYes, the Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair) # BB2441 will protect both your inner and outer bearings. They are sold as a pair so it is enough to protect your bearings on a single axle.
view full answer... - Which Size of Bearing Buddy Will Fit the Dexter Trailer Hub Assembly # 8-213-5UC1The grease cap included in this hub kit # 8-213-5UC1 has an outer diameter of 2.44-inches. So the correct Bearing Buddy would be part # BB2441 or if you want the stainless steel version that will resist corrosion much better you would want the # BB2441SS instead.
view full answer... - Bearing Buddy For A Dexter Trailer Idler Hub Assembly For 6K AxlesThe correct Bearing Buddy size needed for the Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles # 8-213-51UC1-EZ is 2.44". That being said, you can use the: -Bearing Buddy Bearing Protectors # BB2441SS for stainless steel. Or -Bearing Buddy Bearing Protectors # BB2441 for chrome.
view full answer... - Bearing Buddy Recommendation for Trailer Hub # BB2441The hub part # 8-201-51UC3 that you referenced has a hub bore of 2.44 inches so the correct Bearing Buddy would be the part # BB2441.
view full answer... - How to Determine Correct Bearing BuddyWe may have something that will work, though to confirm the right Bearing Buddies you'll need to measure the hub bores on your trailer's hubs using your digital caliper, and match the hub bore diameter to the correct Bearing Buddies. For example, the Bearing Buddy Bearing Protectors - Model 2441 # BB2441 and Model 2441T-SS - Threaded (Stainless Steel) # BB2441T-SS fit a 2.441" hub bore and based on the measurements you gave these are pretty likely to fit your hub. I've added a link to...
view full answer... - Bearing Buddy Recommendation for a Hub Bore of 2.402 inchesFor a Bearing Buddy designed to fit your 2.402 pilot hole on your hub you would want the # BB2441 or the stainless version part # BB2441SS. I attached a review video for you to check out as well. Pricing is below at the links.
view full answer... - Is There A Bearing Buddy That Will Replace A Tie Down Engineering 48399GA Turbo Lube Cap?From what I could find, the Tie Down Engineering 48399GA Turbo Lube cap you have will measure 2.33" at the threads. This is a pretty odd size and, unfortunately, there is not a Bearing Buddy kit currently available to fit this. The closest we have to this size will be the Bearing Buddy # BB2441T-SS (2.441" hub bore) or Bearing Buddy # BB2328 (2.328" hub bore), which is not threaded. The only way we can get a Bearing Buddy for you would be to replace the hubs with something that has a more...
view full answer... - Recommended Bearing Buddy Bearing Protectors for Montana Travel TrailerTo determine which Bearing Buddies you'll need, use a digital caliper to measure the inside diameter of the hub bore, not the outside diameter of the grease cap. Given the 2.443 inch dimension you provided, it's extremely likely that you'd need the model 2441 Bearing Buddy which measures 2.441 inches in diameter. They're available in chrome as part # BB2441 or stainless as part # BB2441SS. If your hub bores are threaded, use part # BB2441T-SS. I'd still recommend you measure for confirmation.
view full answer... - Recommended Disc Brake Kit for Trailer With Tandem 5200 lb AxlesI suspect what you have is what's known as a 5200 lb axle. Assuming your axle uses the 25580 inner and 15123 outer bearings which are typical on axles with capacities of 5200-6000 lbs, and your existing wheels have a 6 on 5-1/2 inch bolt pattern, the Kodiak # K2HR526D disc brake kit you'd looked at would work great for you. The kit includes 2 hub/rotors, 2 brake calipers and 2 caliper mounting brackets as well as the bolts for mounting the calipers to the brackets. For a tandem axle trailer,...
view full answer... - Bearing Buddy for 5.2K Trailer Hub and Drum Assembly with 6 on 5-1/2 Bolt PatternYes, for trailer hub and drum assembly # 8-201-5UC3 you can use Bearing Buddy # BB2441. There is also a stainless steel model, # BB2441SS, which is great for marine applications.
view full answer... - Length of Bearing Buddy Bearing Protectors - Model 2441The total length of the Bearing Buddy Bearing Protectors part # BB2441 is 2-1/4" with the bra installed. That said, it won't stick out from the hub this much as it does press into the hub bore slightly. This will vary from trailer to trailer but I'd say 1/8" is a good estimate.
view full answer...
- Bearing Buddy Recommendation for a Dexter Hub part # 8-201Yep! Your Dexter Hub part # 8-201-9UC3-EZ requires a 2.44 inch grease cap so the correct grease cap would be the # BB2441.
view full answer... - Bearing Buddy for 2.447 Inch Hub BoreThe Bearing Buddy Bearing Protectors # BB2441 referenced in your question are compatible with 2.441 inch hub bores. We do not currently have Bearing Buddies that fit the exact 2.447 inch dimension that you referenced, however this will be the closest option. I recommend verifying the size of your existing hub bore with a digital caliper like # PTW80157. Another option is to wipe away the grease on your hub to see if you can locate the outer bearing number, which will also help to identify...
view full answer... - Bearing Buddies for 2.430 to 2.444 Inch Hub Bore We do have the Bearing Buddy Bearing Protectors # BB2441 or the Stainless Steel version # BB2441SS for corrosion resistance that are designed to fit hub bore diameters of 2.441 inches. This certainly falls within the range you provided but you might want to try and take one more measurement on your car hauler's hub bore just to be sure it matches. I have attached a short video review that you can check out as well.
view full answer... - How Do I Determine What Bearing Buddy Bearing Protectors I Need for My 2006 Pilgrim Cirrus CamperIn order to see if the Bearing Buddy Bearing Protectors, # BB2441, are the correct ones for your trailer, you will need to measure the inner diameter of your hub bore. This measurement needs to be very accurate so you will want to use a dial caliper. If the inner diameter of your hub bore is 2.441 inches, # BB2441 will work for you. If it is not, I am attaching a link to all of the Bearing Buddy Bearing Protectors that we have available. Take your measurement and match it to one of the...
view full answer... - Bearing Buddy that Fits Trailer Hub Dust Cap Bore of 2.374 inchFor the hub bore you mentioned the correct Bearing Buddy is the part # BB2441. This will be a tight fit but it's a tapered fit and work well.
view full answer... - Do Bearings Need to be Repacked With Bearing BuddyThere is no need to further re-pack the bearings with the Bearing Buddies like the Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair) # BB2441. So long as you maintain the grease levels, repacking the bearings isn't necessary, like you mentioned. You'll just add grease, and they have an automatic pressure-relief feature to prevent overfilling, as grease will seep around the edges when they are full. In regard to the correct fit of Bearing Buddies on your trailer, while...
view full answer... - Does Bearing Buddy Replace Bearing Packing on Trailer HubWith Bearing Buddies it is still recommended that you pack the bearings by hand. The Bearing Buddy can only push grease through the front of the hub which can be helpful but does not take the place of packing the bearings properly by hand. I honestly am not the biggest fan of the Bearing Buddies only because it is too easy for people to over fill their hubs with grease which eventually blows out the seal like you mentioned.
view full answer... - How to Determine Correct Bearing Buddies for TrailerIn order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel and tire and remove the grease cap from the center of the hub. Usually it is a metal cap that is just lightly hammered into place. Use a screwdriver to pry off the cap. Clean the grease off and measure the opening. I have included a video demonstrating the Bearing Buddy. The Bearing Buddies # BB2441 that you referenced are for hubs with a 2.441 inch hub bore.
view full answer... - Bearing Buddy Bearing Protectors for 2.42-2.43 Inch Hub Bore Yes, based on the measurements you took of your hub bore diameter the correct Bearing Buddy Bearing Protectors is the part # BB2441 or # BB2441T-SS for the stainless steel model that will resist any corrosion. These are designed to fit hub bore diameters of 2.441 inches to allow for easy maintenance while also keeping dirt and water out of the hub. I have attached a short video review that you can check out as well.
view full answer... - Correct Bearing Buddy Bearing Protectors for 1996 Ranger 461 Boat TrailerIn order to determine which Bearing Buddy Bearing Protectors you need you will need to measure the diameter of the hub bore on your trailer. I recommend using a digital caliper like the # PTW2993 in order to get an accurate measurement. Once you have this measurement you will be able to select the correct Bearing Buddy. For example, if you found that you had a 2.441" hub bore you could use the # BB2441. I have attached a picture showing where you need to measure, along with a link to all...
view full answer...
- Grease Seal & Bearing Buddies For Hub on Dexter 5,200 lb AxleAppreciate that info, and we do have both the grease seal as well as Bearing Buddies you need for a hub on a Dexter 5,200 lb axle, which are the following parts: - Grease Seal # GS-2125DL - Bearing Buddy Bearing Protectors # BB2441 I also wanted to mention that the grease seal is a quantity of one, and the Bearing Buddies come in a pair, just to make sure you get the right quantity depending on how many axles you have.
view full answer... - Recommended Hydraulic Disc Brake With E-Coat Conversion For 7,000 lb Tandem AxlesFor your Lippert 7,000 lb axles, I recommend the Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 7,000 lbs, # K2HR712E. This will give you the 1/2 inch lugs but not the oil bath as you mentioned. For this assembly, I recommend the # BK3-200 Bearing kit. For easy maintenance and monitoring, I recommend the Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair), # BB2441. The Oil Bath option is only available with the 9/16 inch lugs in the Kodiak Disc Brake...
view full answer...
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Written by:
Tyler C
Installed by:
Cole B
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jack
12/16/2023
Bearing buddies are nice simple to use but the main thing is to make sure you’re using the correct grease for bearings not just Plain old grease which will work in the short term but not recommended for the long haul