Replacement Bearing Buddy Bras - Model 19B - (Pair)
(341 reviews)
Price: $3.70
In Stock
Replacement Bearing Buddy Bras - Model 19B - (Pair)
Item # BB19B
Retail:$15.00
Our Price: $3.70
You Save: 75%
Orders above $50 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (341)
- Q & A (60)
- Videos (1)
- Photos
- Why etrailer?
Bearing Buddy Accessories and Parts - BB19B
- Trailer Bearings Races Seals Caps
- Dust Caps
- Bearing Buddy
Replacement cover slides over Bearing Buddy to keep grease contained and off of your tires and wheels.
Features:
- Vinyl cover fits over Bearing Buddy bearing protectors
- Fits models 1980, 1980SS, 1980A, 1980A-SS, 1938, 1938SS, 1968, 1968SS, 2047, 2047SS, 2080 and 2080SS
- Outer diameter: 2-1/8"
- Keeps excess grease off tires and wheels
- Quantity: 2
To prevent overfilling, Bearing Buddies have an automatic pressure relief feature that allows the grease to come out through the Bearing Buddy instead of out the grease seal on the back of the hub. The bra over the Bearing Buddy contains the grease, keeping if off of the trailer tires and wheels.
70019 Bearing Buddy Bras Model 19B (Pair)
Video of Replacement Bearing Buddy Bras - Model 19B - (Pair)
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Bearing Buddy Bearing Buddy - Bearing Buddy Bra - BB19B
Hey guys, it's Randy here at etrailer.com. Today we're going to be taking a look at the replacement bra for the Bearing Buddies. Now, this is going to be the larger size. This is outside to outside dimensions, here are going to be two and 1/8 of an inch. These are just spacers to keep them in shape. Generally, it's going to be, as you can see here, a hollow cap.Now, this is going to be a vinyl cover.
You're probably used to seeing, especially if you're looking for the replacement or maybe you've bought a new trailer and these we're missing on it. Basically, your Bearing Buddy sticks on the end of your hub. This is just going to slide over the end of it. It keeps everything contained, and it's going to help keep any excess grease contained within rather than it getting that rotational energy and slinging out on your tires.Now, as far as the models it's going to fit, again, the key thing to know is if you measure your Bearing Buddy and it's near two and 1/8 of an inch outside to outside, this is going to be the replacement. So that covers the 1980, 1980SS, 1980A, 1980A-SS, 1938, 1938SS, 1968 model, 1968SS, 2047, 2047SS, 2080, and 2080SS.It's going to be an excellent way to keep that grease from being slung around, and it also keeps moisture from getting in there.
It keeps dirt from getting in there, and it just helps to ensure your Bearing Buddies are going to last for a very long time and keep your bearings in there packed full of grease.There's also going to be instructions here, as far as how to check the levels. So if you don't know exactly how a Bearing Buddy works, it spells it all out right there for you exactly how to just push the piston. If it doesn't rock, add a little grease. If it does, you're good to go.But all in all, just be an excellent way to get those protected and also protect grease from being flung out all over your wheels and tires.
Customer Reviews
Replacement Bearing Buddy Bras - Model 19B - (Pair) - BB19B
Average Customer Rating: 4.8 out of 5 stars (341 Customer Reviews)
Replacement cover slides over Bearing Buddy to keep grease contained and off of your tires and wheels.
- BB19B
John K - 09/13/2021
by: John09/12/2020
I needed some replacement bras to go over the "Bearing Buddy" greasers on my boat trailer. I could not find just the covers locally but etrailer had them What I appreciated the most was the ease of navigating their website. Click-click, and they were on their way!
Comments
Excellent !!
John K - 09/13/2021
- BB19B
by: John T.11/21/2016
I have been working on a boat and trailer that I got in a government surplus auction. The trailer is a triple axle and needed quite a bit of work. I replaced one axle and the brake lights. I am in the process of replacing all of the brakes, tires, bearings and seals. I am about half way done with the trailer and so far I have been very happy with the parts I have received from etrailer. I have not been able to road test them yet but installation has been great. I intend on getting a majority of the parts I need to finish the project from etrailer. The video overviews and installation instructions have been very helpful. Looking forward to sharing more pictures when the project is done.
- BB19B
Dominic - 04/20/2021
by: Dominic M02/24/2020
I use stainless steel bearing buddies on my boat trailer. When you purchase the caps for the bearing buddies, be careful to make sure the cap is appropriate for your model of bearing buddy. As long as you do this, you will be fine, and the cap will fit tightly on the bearing buddy. I learned this the hard way by ordering caps that were just a bit too lose, and the caps kept falling off. Now that I have the right caps, they stay in place as they should.
Comments
I purchased the caps that go over the open end of the bearing buddies. We use a hoist to lift our boats off their trailers and put them in the water. The trailers never go in the water, as happens when you ramp-launch. So, we never test out how well the caps work when submersed. However, they are working great in keeping out rain. Thanks.
Dominic - 04/20/2021
- BB19B
by: Lynn10/28/2021
im not the best doing reviews. all i can say is that etrailer they do all they can do to get thier products that are orderd was taking care of as it were the only thing they hade to do .
- BB19B
by: Richard11/12/2021
What can I say, they are bearing buddy bras. They work as they are supposed to.
- BB19B
RON S - 08/03/2020
by: RON S08/01/2019
All of these are working out really well. I especially like the Fulton spare tire carrier, mounted on the trailer tongue towards the front---gives about 1.5 inches of clearance between the boat and the mounted spare tire. The adjustable height of the mounting arm was really a nice feature for my application. I've use Lubrimatic marine grease for years, and expect long life from this brand. The Bow Stop has the perfect angle to receive the bow of my 1970 classic Glastron Futura V 153, and so far appears to be non-marring to the finish of the boat. Very happy with all of these items!
Comments
The bearing buddy caps fit perfectly and perform their intended purpose well-keeping dirt out, but still can be easily removed to allow access to the lube fitting to pump grease into the bearings. They are holding up quite well after a year of service in and out of the water.
RON S - 08/03/2020
- BB19B
by: Charles F11/06/2021
Needed to rebuild my trailer wheel hubs. As the old ones were degreaded from UV light.
- BB19B
Neil W - 08/03/2021
by: Neil08/02/2020
Exactly as advertised. Could not find these anywhere else. So glad etrailer exists and has just about everything I need.
Comments
Durable, works as advertised, no problems after one year.
Neil W - 08/03/2021
- BB19B
Rob - 09/15/2021
by: Rob09/14/2020
Ordered these for my boat trailer and they fit perfectly.
Comments
No issues after a year of use.
Rob - 09/15/2021
- BB19B
by: Andy11/22/2021
As always great service from Etrailer!
- BB19B
by: Stan08/19/2021
Works and it’s as expected Great and fast service. I will use etrailer for my trailer parts in future
- BB19B
by: Lonnie10/27/2021
excellent and fast customer service from Ashley and ETRAILER !!
- BB19B
by: Pappylaz10/05/2017
Second set if these I've used. First was on my utility trailer years ago. This set is on my home built log splitter. The first time I towed the splitter I suffered from a bad inner seal that spewed grease all inside the one wheel rim. I was 150 miles from home, deep in the woods. Had to pull the wheel and repack the axle with grease to make it home. Found a welding spall on the axle that chewed up the seal. Removed the spall, polished the seal surface and put on a new seal. Then I added the Bearing Buddy's to make sure I kept things lubricated in the future. They do the job and provide peace of mind.
- BB19B
by: Gene05/28/2021
perfect fit. now i do keep the bearings on my trailer properly greased. now, not only is it easier to keep things greased but it is much safer. wery happy!
- BB19B
by: John03/16/2021
Product works great and looks good too! I have white wheels on my trailer bearing buddies helps keep them looking good and wheel bearing grease in.
- BB19B
by: David11/06/2021
Item is as discribed. Fast service. Good people to do business with, will use again.
- BB19B
Mike L - 07/25/2019
by: Thomas07/23/2019
Looks like a great idea. Seems like a high quality part. Figured I'd double up on protection replacing the rubber grease caps and putting these over the whole assembly...but... they are too large of a diameter to fit the bearing buddy on my trailer.They would absolutely spin off the 1st travel mile. Must be there are multiple sizes? ...C'est la vie....I am sure that the new grease cap plugs alone will provide plenty of protection, as per the original equipment on the trailer. (2006 Fleetwood Neon Camper trailer)
Comments
These are designed specifically for use with Bearing Buddies that fit a 1.98 inch bore diameter and have an outside diameter of 2-1/8 inches.
-- Mike L - 07/25/2019
- BB19B
by: Geoffrey06/22/2021
Etrailer was quick and easy to do business with and had good assortment of parts
- BB19B
by: Robert11/14/2021
These have a better fit and cost less than when you can find other brands in an auto supply store.
- BB19B
by: Raymond05/21/2021
snugs on and does not come off in highway speeds or when submerging the trailer in water during launch and retrieval
- BB19B
by: H Cabot08/22/2020
Arrived quickly, easy installation, followed up to confirm my satisfaction. All around a good experience.
- BB19B
by: Roland03/31/2021
Of course I love Etrailer.. all your products I have purchased from e trailer worked great.I’m happy with all of them nice job . I also like the phone help which is quick and easy.Ron
- BB19B
by: John11/13/2021
Great deal. Fast shipping. Received just what I ordered. Thank you.
- BB19B
by: Richard03/27/2020
My used boat trailer came with Bearing Buddies installed in the hubs . But they were missing the caps . There is no identification on the BB's so I measured the OD of the exposed chrome hub . It was 2" . The website doesn't show the ID of the vinyl dust caps so I started a chat with an associate . It was suggested to purchase this size . I received them yesterday and they are too large/loose and will fall off. I don't blame the associate , it appears there are many complaints on line about these caps on a variety of forums. The problem appears to be BB refused to list the ID of any of their caps , they just list the part number of the hubs they fit. So if you don't know the original part number you have to guess . My poor rating is directed at Bearing Buddy NOT etrailer . etrailer made good immediately and will refund the purchase price . Great doing business with etrailer .
- BB19B
Kip B - 10/10/2018
by: Kip B.10/08/2017
I didn't realize that the buddies I was working with were the smaller ones. Had cleaned them all up, installed new brgs and seals, pack them with new marine grease and then to my suprise the bras were too big. I'd like to return them for the 17B bras. Will contact you guys on Monday. So I can get this job completed and get the 62 Chris Craft off the lake and winterize it. Thanks.
Comments
Just talked to the customer the other day. Has trailered his Chris Craft on several outings. I guess everything is fine. Thanks.
Kip B - 10/10/201825
342
Show More Reviews
Ask the Experts about this Bearing Buddy Accessories and Parts
- Replacement Bearing Buddy Bras for ~2 Inch Bearing BuddiesThere isn't a 2 inch Bearing Buddy so you likely have a 1.98 or a 2.047. In either case # BB19B would be the correct replacement Bras.
view full answer... - Replacement Bearing Buddy Bras for Bearing Buddies with 2 inch Outer DiameterReplacement Bearing Buddy Bras - Model 19B # BB19B are a strong candidate for the right fit. They fit models 1980, 1980SS, 1980A, 1980A-SS, 1938, 1938SS, 1968, 1968SS, 2047, 2047SS, 2080 and 2080SS. The outer diameter of the bra is 2-1/8 inches which means the inner diameter is approximately 2 inches. There is another option that is much too large and a third, # BB17B, that is likely too small (it has an outer diameter of 2 inches).
view full answer... - Dimensions of the Replacement Bearing Buddy Bras # BB19B I went and pulled the Replacement Bearing Buddy Bras # BB19B from our warehouse to get the dimensions you requested and found them to be 2.07 inches from the inside of the cover and 1.29 inches deep.
view full answer... - Precision Digital Caliper to Measure Hub Bore to Select Correct Bearing Buddy Bearing ProtectorBearing Buddy protectors are made in lots of sizes, many of which are very close to one another in their diameter. It is really necessary to use a more precise measuring device on the hub's bore unless you know the part number of the one that was lost. You might check the remaining one for any identification. There are two sizes that are close to your 2-9/16-inch dimension, 2.562-inches and 2.717-inches. Bearing Buddy parts that fit hub bore diameter 2.562-inches are either part # BB2562SS...
view full answer... - Bearing Buddies that Measure 2-1/8 Inches in Outer DiameterWhen selecting bearing protectors the measurement needs to be as accurate as possible so you will need to use dial calipers. We have a digital set we use here for precise measurements. Since 2.24 is too large and 1.98 is too small the size in the middle is 2.08 like # BB2080. For replacement bras you would use # BB19B.
view full answer... - How to Measure for the Correct Grease Cap or Bearing Protector for a Boat TrailerIt sounds like you need a grease cap or bearing protectors. The Bearing Buddy Bra, # BB19B, that you referenced covers the Bearing Buddy Bearing Protectors, like part # BB1980A. In order to choose the correct grease cap or bearing protector, I strongly recommend using a precise measuring tool such as a dial caliper. Hubs can have bores that differ by only a few thousandths of an inch, so getting an exact measurement will help us choose the correct cap for you. Check out the photo I...
view full answer...![Image 1 for]()
- Correct Size Bearing Buddy BraThe Bearing Buddy Bra # BB19B you purchased has an outer diameter of 2-1/8" and fits models 1980, 1980SS, 1980A, 1980A-SS, 1938, 1938SS, 1968, 1968SS, 2047, 2047SS, 2080 and 2080SS. The only other Bearing Buddy Bra we carry that is smaller is # BB17B, which has an outer diameter of 2" and fits models 1781, 1781SS, 1810 and 1810SS, so if you have one of those models this part would work for you. I've added a link to a video review of this part for you to check out as well.
view full answer... - Bearing Buddy Bra Recommendation for Bearing Buddy that Measures 2.035 inchesIf you have a Bearing Buddy on your trailer that has an outer diameter of 2.035 inch the correct Bearing Buddy Bra replacement would be the part # BB19B.
view full answer... - Bearing Buddy Dust Covers for Bearing Buddy with 2.125" Outer DiameterIf the outer diameter of your Bearing Buddy measures 2.125" then you need the Model 19B Replacement Bearing Buddy Bras # BB19B. These are compatible with models that have an outer diameter of 2-1/8" (or 2.125" in decimal form). Attached is a review video for you to check out.
view full answer... - Does Bearing Buddy Bra Need to Be Removed Before Backing Trailer Into WaterThe bras on the Bearing Buddies are meant to be left in place unless you are adding grease or checking the grease level. There is no need to remove them before backing your trailer into the water.
view full answer... - Dust Cover For Trailer Hub Bearings on 2004 Shorelander Boat TrailerThe Bearing Buddy Replacement Covers, # BB19B, are made to fit the Bearing Buddy bearing protectors. If the bearing protectors that you have say 1.980, then that would be the size you would need. The only dust covers I sell separate are for the Bearing Buddy brand. For your size I do have the Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair), # BB1980A, the Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair), # BB1980A-SS,...
view full answer... - Recommended Bearing Buddy Bra for Bearing Buddy with Outer Diameter of 2-1/16-InchesBearing Buddy covers are flexible but still the better option for your Bearing Buddy that has a 2-1/16-inch outer diameter is the larger of the two sizes offered, # BB19B.
view full answer... - Bearing Buddy Bra Size RecommendationMost likely the correct replacement bearing buddy bra that you would need is the part # BB19B which has an outer diameter of 2-1/8 inches. Part # BB17B has an outer diameter of 2 inches, and part # BB23B has an outer diameter of 2.441 inches (this would be the second most likely one for you to use). You will need to measure your current bra to determine which you would need.
view full answer... - Replacement Bearing Bra For Bearing Buddy With 2-1/4 Inch Outer DiameterYes. The Replacement Bearing Buddy Bras for your Bearing Buddies are # BB19B. These covers have a little bit of adjustability as the Bearing Buddy can change shape slightly when being installed.
view full answer... - Which Bearing Buddy Bra Will Fit a Bearing Buddy With a Overall Diameter of 2-1/8 InchesYes, the Replacement Bearing Buddy Bras, part # BB19B, you have referenced, will fit the Bearing Buddy bearing protectors that measure 2.125 (2-1/8 inches) in overall diameter.
view full answer... - Replacement Dust Cover for Bearing Buddy that Measures 2-1/2 inches AcrossThe Bearing Buddy Replacement Bras you will need are part # BB23B, model 23B.
view full answer... - Replacement Dust Cover for Bearing Buddy that Measures 2-1/2 inches AcrossThe Bearing Buddy Replacement Bras you will need are part # BB23B, model 23B. This cover is designed to fit Bearing Buddies with an outer diameter of 2-1/2 inches.
view full answer... - Need 1-1/2-Inch Bearing Cover for Small Trailer AxleThe link provided will take you to our main page for grease caps. The various diameters available are shown at the top of the page. The option closest to your quoted 1-1/2 inches is the 1.786-inch size. We offer the Fulton # F001503, which is sold as a single unit. These caps are made of 22-gauge zinc-plated steel and can be installed with a rubber mallet.
view full answer... - Replacement Bras for Bearing Buddy Grease CapsIf you have tried Bearing Buddy replacement bras # BB19B and find them to fit too loosely on your Bearing Buddies, then you can use the smaller size # BB17B. These are sold as a set of two.
view full answer... - Bearing Buddy Covers for Trailer with 2-Inch Bearing BuddiesThe Replacement Bearing Buddy Bras (dust covers) # BB19B that you referenced are intended to fit several different sizes of Bearing Buddy, from 1.98-inches up to 2.080-inches. They also offer replacement bra # BB23B that fits Bearing Buddy sizes 2.328-inches through 2.717-inches, and part # BB17B that fits smaller sizes. In between the two sizes you referenced there are three intermediate Bearing Buddy sizes, 2.047-, 2.080- and 2.240-inches. There is no exactly 2-inch size. If you wish...
view full answer... - Replacement Bras for Reese Tow Power Bearing Protectors 74177The Replacement Bearing Buddy Bras part # BB19B will work with your Reese Tow Power Bearing Protectors 74177. I do not have the plain gray Reese branded ones but the above will work just fine for the intended purpose.
view full answer... - Bearing Buddy Bra Recommendation for 54 mm Bearing BuddyYour 54 mm Bearing Buddy converted to inches is right at 2 inches so you would need the # BB19B that you referenced.
view full answer... - Replacing Grease Caps of Carry-On 5x10 Single Axle Trailer With Bearing BuddiesTo determine which side of Bearing Buddy you'd need for your existing hubs, you'll need to use an accurate measuring device like a digital caliper and measure the inside bore of your hub. Once you find the inside diameter of the hub bore, you'll choose a Bearing Buddy with the matching diameter. For instance, if you find that the diameter of your hub bore is 1.98 inches, you'd go with a Bearing Buddy like the # BB1980A-SS. I've linked you to the main page for bearing protectors. At...
view full answer... - How to Determine the Correct Replacement Bearing Buddy Bra Size If you cannot locate a model number on your current Bearing Buddies You will need to measure the outside diameter of the actual Bearing Buddy itself. For an outside diameter of 2-1/8", you will want to use part # BB19B. For an outside diameter of 2-7/16" you will want to use part # BB23B and part # BB17B for an outside diameter of 2". The Replacement Bearing Buddy Bras are sold in pairs of two. I have attached a review video of this product for you as well.
view full answer... - Selecting Replacement Bearing Buddy Bras for Proper FitThe easiest way to find the correct size Bearing Buddy bras for your trailer is to use the part number of the Bearing Buddy that you have installed. We offer three sizes of bras: # BB17B fits models 1781, 1781SS, 1810 and 1810SS; part # fits models: 2328, 2328SS, 2441, 2441SS, 2717, 2717SS, 2562, 2562SS, 2240 and 2240SS; and part # BB19B fits models 1980, 1980SS, 1980A, 1980A-SS, 1938, 1938SS, 1968, 1968SS, 2047, 2047SS, 2080 and 2080SS.
view full answer... - Replacement Hub Assemblies For 24 Foot Pontoon Boat TrailerThe best way to provide the correct hub for your spindles is to compare the bearing numbers. Check your existing inner and outer bearings for their reference numbers. I have enclosed a photo that shows where you should be able to find the numbers. When we get those numbers, I can recommend the correct idler hub for you.You mentioned the # L44649 bearings. We do have hubs that use that bearing but it is seldom that both the inner and outer bearing are the same. One of the hubs we offer...
view full answer...![Image 1 for]()
- Replacement Bra For The Buddy Bearings Model # 1980Yes, the correct buddy bearing protector/bra is the Replacement Bearing Buddy Bras part # BB19B. This bra is an exact fit option for the 1980 buddy bearings, such as part # BB1980A-SS. It comes with two covers, one for each side.
view full answer... - Bearing Buddy Bra Inner Diameter And Hub MatchThe Replacement Bearing Buddy Bras # BB19B are intended to fit several different sizes of Bearing Buddy, from 1.98-inches up to 2.080-inches and has an outer diameter of 2-1/8 inches The sizes of these products are specific to the Bearing Buddy that you already have. If you can find that size or measure your hub bore to know which size you need. Or the model number of the existing Bearing Buddy would help.
view full answer... - Rubber Covers for Model 1980 Bearing BuddyYes, the # BB19B would work with your 1980 model of Bearing Buddy protectors. These covers will keep grease where it belongs, and off the tires and wheels of your trailer. These are sold in packages of 2, so please order accordingly for how many axles your trailer has. I have included a link to the part listed above for your reference.
view full answer... - Replacement Bearing Buddy Bras for Bearing Buddies with 2.13 Inch Outer DiameterBased on your measurement of 2.13 inches it sounds like you will need model 19B # BB19B. These have an outer diameter of approximately 2-1/8 inches. They will be easier to put on if you leave them out in the hot sun for a little while. It makes them more pliable. The next size up would be way too big and the next size down will be too small.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Cole B
Video Edited:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.