Trailer Bearings Races Seals Caps

/

Bearing Buddy

/

Caps

/

Bearing Protector Grease Cap

/

2.080 Inch

Bearing Buddy Bearing Protectors - Model 2080 - Chrome Plated (Pair)

Bearing Buddy Bearing Protectors - Model 2080 - Chrome Plated (Pair)

Item # BB2080

lowest price pledge

Retail:$28.93

Our Price: $21.42

You Save: 26%
Trailer Bearings Races Seals Caps

Orders above $50 qualify for Free Shipping

Shipping Weight: 1 lbs

Arrives before Christmas with Ground or 3 Day Shipping.
Quantity: 
In Stock, Ships Today
Bearing Buddy Bearing Protector Grease Cap Trailer Bearings Races Seals Caps - BB2080
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub. Lowest Prices for the best trailer bearings races seals caps from Bearing Buddy. Bearing Buddy Bearing Protectors - Model 2080 - Chrome Plated (Pair) part number BB2080 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (17)
  • Q & A (18)
  • Videos (2)
  • Photos
  • Why etrailer?

Bearing Buddy Trailer Bearings Races Seals Caps - BB2080

  • Caps
  • Bearing Protector Grease Cap
  • 2.080 Inch
  • Bearing Buddy

Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub.


Features:

  • Replaces the grease cap in the axle hub
  • Prevents wheel-bearing failure
    • Keeps water and dirt out of hubs and bearings
    • Allows boat trailer wheels to be completely submerged
    • Stops corrosion and pitting on bearings
  • Provides easily accessible grease fitting
    • Makes adding grease to the bearings quick and simple
  • Maintains slight, controlled pressure (3 psi) with spring-loaded piston, preventing water from entering hub
  • Prevents overfilling and rear seal damage with automatic pressure-relief feature
    • Grease seeps around piston edges and into barrel when full
  • Constructed of stainless steel internal parts and triple-chrome-plated steel barrel
    • Ensures longer-lasting fit than plastic or aluminum products
  • Includes rubber covers
  • Installs easily
  • Made in the USA


Specs:

  • Fits 2.080" hub bore
    • Works with 900 series outer bearings
    • Works with 900 series outer bearing cups (races)
  • Lifetime warranty


Bearing Buddy installed diagram

Bearing Buddy Operation

Replace your existing grease cap with a Bearing Buddy to ensure a safe, easy way to monitor and control the level of grease in your axle hub. To adjust the amount of grease in the hub, use a grease gun to add more through the appropriate fitting. Adding grease moves the Bearing Buddy spring-loaded piston outward 1/8".

The O-ring inside the barrel of the Bearing Buddy maintains a seal from the outside. The interior of the Bearing Buddy is pressurized, preventing water from entering the barrel and diluting the grease.

An automatic pressure-relief feature is built into the Bearing Buddy. When the device is full, grease will seep around the edges of the piston and into the barrel. This prevents overfilling that can damage the inner seal.

You can manually check the grease level in your Bearing Buddy by pressing on the edge of the piston. If you can rock or move the piston, the hub is properly filled.



42800 Bearing Buddy Model 2080 - Chrome Plated (Pair)





Video of Bearing Buddy Bearing Protectors - Model 2080 - Chrome Plated (Pair)


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Bearings Races Seals and Caps Rebuild

Speaker 1: Today we're going to take you through the rebuild process on a couple of hubs. We've got an idler hub, and here we've got a hub and drum assembly. Works with electric rigs, but this can also work for just standard discs, if you've got a disc brake style setup.Basically what we're going to show you is how to get all of the bearings out. How to remove the seal. How to remove the race's if they're damaged, then get them replaced in the proper manner. We'll show you how to use an easy loop hub, which we have here.The first thing we are going to need to do is, get the grease cap off the end.

It can have either a rubber plug in it like this one does, or it can be a solid metal cap.These are pressed fit in there, basically by tapping on them on the back side. To remove them, a deadbolt hammer is typically what we're going to use. We're just going to start tapping as we go around. You'll see a little separation start right here, and slowly it'll work it's way off.Now the next step's going to vary a little bit depending on your axle setup. Do you see this is going to have a keeper that goes around the nut.

And that prevents that from being backed off, or removed. A lot of times you'll have a castle nut, which will have just little tabs that stick off, and there will be a cotter pin that passes through it. Just depending on your application, you need to get the keeper for the nut off. This style we just kind of pry out. A cotter pin you would just remove of course.Once we have that off ...

We'll start to take off the nut here, and the washer that's in behind it. Now yours should look a whole lot more dirty than this. There should be a lot of grease packed in, and through the hub, this one's brand new. We thought it'd be nice to show you the components before the grease was on .. Of our washer that comes off.And then here we're going to have our outer bearing.

Continue to pull that. We're gonig to have our inner bearing here. That sits in the backside of the hub. And we didn't put it in yet, we will show you how to put it in. But a seal would typically be covering the backside here. We'll show you how to use a seal removal tool, or another tool. To get that pried up and out. To get an access to that inner bearing.Now for a drum style like this, that process for disassembly is going to be just the same. One thing to keep in mind if you're using a disc brake setup. You'll have to remove the caliper before the disc is going to come off.Now once we have the spindle exposed, as we said this is going to be really greasy. We want to get all the grease removed, and the first thing we'll do is inspect it. We want to make sure that it looks just like what we have here. Everything's nice and smooth. We don't see any kind of discoloration, or any marring on the metal. Indicating that our bearing's got hot.If you do have any of those symptoms, at this point it's time to replace those bearings. You don't want to repack them. Get new bearings, and put in there. You might have a bearing that's come apart in here. Another surface to ensure is in good condition, is where your seal is going to go. That helps seal all the grease inside of our hub. With a damaged or broken seal, that grease is going to seep out. Either out of the hub, or in this case into our brake assembly.Now if your axle has brakes, we're also going to check the disc. Make sure it doesn't have any issues, or your hub. And this is going to be a hub and drum assembly. The brakes are going to ride on this machine surface. You're going to check that for signs of excessive heat, discoloration, or cracking. And this is our magnet surface. We'll check that surface for the same issues.Now inside the hub regardless if it's a disc brake, it's a drum brake like this. Or just a standard idler style hub. You're going to have an outer race. Would be right here, it's a small tapered piece of metal your bearing sits in, and rotates on. That's basically the outer portion of the bearing.You have the same thing here on the backside. This is called the inner race. Now if those show any signs of wear, overheating, or cracking. Those are also something we'll need to replace, which we'll show you how to do in just a minute.Now, with your brake assembly exposed, if you do have electric brakes like we have here. It's a good idea to check all the components for wear, cracking, maybe missing pieces. Check your pad thickness to make sure those are in good shape. Basically if you have a non working brake assembly and you put everything back together, you're just going to have to take it apart and do it all over again to get back to the brake assembly. This gives you a really good option to be able to change them out.And most applications are going to use a four, or maybe a five bolt flange to hold them in place. And you'll just remove the lock nuts, or sometimes you'll have a hex nut with a lock washer. You want to remove those, and then simply slide your assembly off after you cut the wiring.The friction material itself should also be checked for any kinds of cracking, or overheating. If you have any grease inside the system at all, it's likely it's gotten on those pads. It's a good idea to get those changed. Now as far as the removal of the races go, it's going to be just the same whether we're using an idler style hub like we have here. A drum brake like we have here. You can basically see where the idler is, here in the middle of the hub. It's going to go all the way around there, and we just have this extra material here to provide our braking surface.Now if you're doing a disc brake style job again, it's going to be just the same here with the races living inside of the actual hub portion. You'll just have the discs there for the brakes to make contact. We're going to use this little bit smaller one, it's a little bit easier to manage to show you how to get these out. We've talked about where the races are. The outer here, the inner being closer to the inside, but on the backside of the race there's a little lip. That lip's meant to stick out just a little bit further than the hub, and provide us an area to put our tool on, and help to drive that out.If you look all the way through there on that inner race, you'll see that little lip that sticks out just from the hub slightly, and it gives us enough area to use our tool on. Now generally to remove these you're going to use a punch, similar to this. Some guys will use a screwdriver. Or a piece of pipe. If you have a piece of pipe that's small enough to fit inside of that diameter, you can take that down through and allow it to rest on that lip.Use our punch, and then just need a hammer. And we'll start working that out. We're going to tap all the way around. Kind of equally, and evenly apply the force to get it to come on out of the bottom for us.You can see now as it starts to come out there's going to be a little gap created between the hub and the race. And we can just keep going, bringing it on out. Then you can inspect the inside of the hub surface there. Make sure no damage or anything has occurred, and repeat that same process for the outer race if you plan on removing and replacing that one.Now in the outer flat edge, you can see we're going to have our tapered edge on this side. If we roll our race over to the flat side, typically there's going to be a manufacturers part number on there. That will help you identify which race it is, that you need to go back in your system. If those are rubbed off, worn off, if you can't read them. You can measure the outside, to outside diameter of the race here. It's a good idea to use a micrometer to get it exact.Now here's your basic micrometer. And again, the outside of the race is what we're going to need to measure. You want to go . I set the thickest point there. Looks like this one's going to be about 1.98. That's going to be the measurement you'll want to supply.Now while we've got this out, let's also look at the proper way to measure our bearing. Instead of the outside for the bearing, we need to measure the inside diameter. That's going to be pretty simple. Let's pull that out, find the largest measurement we can. Which here, looks like it's going to be 1.03. With that information, we'll be able to get the correct bearing, and the correct race, so they'll fit together properly and make a full bearing kit for us.Now here's the race, we're going to show you how to get this put back in. Basically just going to press fit inside of our hubs. We need to get it down on there. Kind of like that. And you'll have a couple options. A lot of times you're going to see do it yourself or at homer, just going to use a wooden block. Just place it on there. That's going to get you started, but at that point you'll struggle in getting it to go all the way down into it's seat.Now to take care of that problem, there are several seal drivers that are available. Seal and race drivers that are available out there on the market. It's designed to fit down inside of our race, inside of our hub and get it down there where it needs to go. This is part number ptw83020, has several different sizes, even if you have multiple trailers it's going to do the job.Now the side with the angle on it, is designed to fit down inside of our race. If we use the other side, that's going to be for driving your seal into place. Just want to hold it, and take it on in with your hammer. You'll see, you just want to insure that our race is all the way up against that line on the hub where it's supposed to mate to.Now when it comes time to pack your bearings you're going to have several different ways of doing this. You can just use your hand, is the traditional method. That's going to be the method probably reserved for the very occasional trailer work kind of situation. If you do it once or twice a year, probably get away with it that way.Next you would go to a, kind of a sandwich funnel style almost. If you look inside of there, you can see the bearing. It's located between the two pieces. Just use a grease gun. Start filling that with grease, and that's going to fill our bearing for us. And the third, with this one you're just going to place your bearing down and in. It should be pretty close to center. And then we've got our cone her that's going to go down and secure that.Now I think this style, wastes a little bit more grease than what this style will. This has a dust cap. You can see, you can keep your grease in there, put your dust cap on there and save it for later use. This will be if your going to do it every couple years. And this particular style would be if you're a more regular user.Let's start by showing you how to use a bearing packer. Similar to this. Again, we've just got our grease inaudible 00:11:07 here on the top. And then just slowly start to fill it. Now I like this style quite a bit. I think even regular users might enjoy it, because you can get a really quick visual look at that bearing. You're not going to have to overdo it, or have to much grease.You can kind of see in there now, we're starting to get grease to come out of it. Couple more pumps, we'll be good. You can see we've got grease coming out all the way around. Where all of our bearings are. Got a little bit of excess there. Just take that around the outside of it. And then we should be able to lift it off. And now you can see what we we're talking about. Just a little bit of excess there, that you're just going to wind up wasting.Now we'll take our bearing, we're going to place it right down in our race. And then we'll cap off the back with our seal. Right now our seal's going to fit in just like our race did. It's going to have a little bit of a pressure fit to it. Now very often in this situation, I see people using the four by four method. Kind of here, just placing that on and tapping it. As an option though, if you do have one of these. You can see that's designed to fit right on the top of the seal. And help drive it in.The biggest thing here is, just going to be getting it driven in squarely. You can see, this side's in a little bit further than this side. I'm going to start this side first. Now since we didn't have the opportunity to show you before, we're going to take a look at pulling a seal. Now this is a seal puller, we carry this on our website part number ptw1219. This is meant to hook underneath the seal. And then you kind of pull up on it, and just like our race you'll have to work all the way around that edge. Just bringing it out a little at a time.If you don't have that available. Another option would be a screwdriver. You just kind of get that under the seal, and turn it. And see, that'll allow you to also pop that out. We've taken care of our race. Our inner bearing. Our seal. The last component, before we put our hub back in place is going to be our outer bearing. Now with this bearing, I'll show you the hand packing method.This is definitely . Slightly dirtier method than the bearing packer. When we get grease on our hand we want to look at the larger side of the bearing. This is the smaller side. We have a larger side In between the inside and outside there's a gap. We can see our rollers in there. We want to grab that, and use that gap and shove grease inside of it. Now this is going to take a little bit, you want to work in the same spot until you get the grease pushed all the way through. We can see on the top there we've got a little bit starting to come through.And once we push it in the bottom, and you see it start coming out the of the top in those little drips, it's going to indicate that, that section's fully packed. Just need to work all the way around their outside edge now and do the same thing. Alright, once that's all the way around . The bearing will be ready for use.Now one more thing I like to do. We can see our inner bearing there, and our outer bearing. Well between the two, got a pretty big gap in there. If you'll take a . Pretty good amount of grease. We're just going to go all the way around. See how we can go all the way around the inside and just line that really well. The more grease we have in here, the less chance we have of any moisture getting in there, which can cause corrosion, rust, pitting. Pretty much things we do not like when it comes to bearings, races, and hubs.Put plenty of grease in there. And then this one does have the easy lube spindle, that'll even fill it in more. Now we can get our assembly slid on. I like to keep my thumbs on that outer bearing, just to prevent it from . inaudible 00:15:28 pushed off there. Now we can put on the original hardware that we removed, in taking off our hub the first time. In our case, we had our washer and our nut.Now most commonly you'll see pliers similar to this being used. We basically want to get that tightened down. Once it's fully tightened down you'll feel some resistance in the hub. We back it off just slightly. That'll give us a little bit more freedom of motion there. Something you don't want however . Is any movement in, or out on your hub. You want to be sure that everything is compressed, and you don't have what's called end play. Which would be the play in and out.Once we've got that set, then you'll put on whatever tight keeper yours came with. Get that put back in place. Now with an easy lube style hub, you're going to place your grease gun on the end, and then you can just fill the remainder of that hub up.Now for your typical applications, you're either going to have a solid cap, or a cap that'll have a rubber plug in it. A solid cap's going to be for an axle without the grease inaudible 00:16:51 here on the end. Goes on there. Just knock it on with your rubber mallet. Same with the one with the plug. Just gives you a removable area there, be able to cap that off.We'll show you how to put that on. Now as alternatives as well, a lot of times on boat trailers and marine kind of situations. You'll see a bearing buddy. This is going to apply a little bit of pressure on the grease, you'll fill it up. This kind of comes out just a little bit. That applies constant pressure on the grease to make sure we don't have any air, or anything like that. Then there is also an oil bath hub available. Now this is going to be for use with seals that are going to be designed specifically for oil bath use. You'll have to change that seal.We're using a double lip seal. There are also single lip seals available. Of course a double lip seal is going to give you just a little additional security. Keep that in mind when you order. But let's get this knocked on there now so you can see how that works. We just want to take the cap, we're going to center it. This is going to be very similar to what we did with the seal. And then just gently start tapping it around the outside. And it'll seep down on there for you.It's really going to be the same thing that you'll do with any of the end caps. Now with this side done, it's a good idea to take care of all the other hubs. Get them all on the same maintenance schedule. And as long as you'll periodically check the grease, take your trailer out for a trip occasionally. Just to keep everything lubricated. It should extend the life of these parts, and give us years of good service.


Customer Reviews

Bearing Buddy Bearing Protectors - Model 2080 - Chrome Plated (Pair) - BB2080

Average Customer Rating:  5.0 out of 5 stars   (17 Customer Reviews)

Provide your trailer wheel bearings with premium protection - replace your existing grease caps with Bearing Buddies. They install in seconds and provide an easy, safe way to monitor and control the level of grease in your axle hub.

- BB2080
by:

I measured my utility trailer hubs to be 2.075” with digital callipers but I had no problem installing the 2.080” model Buddy Bearings set from etrailer. I just lined them up with the hub and took a few good tries at driving them in straight with a rubber mallet. They eventually went in very tight which is just what I wanted. Thanks and great product! 726295



- BB2080
by:

Good quality construction, they fit snug on the hub and they seem to do what they are supposed to do without any complaints. 682608



- BB2080
by:

good quality product. good price . Great service. 577403



- BB2080
by:

excellent 525200



- BB2080
by:

Your employees were excellent. One bearing buddy didn't fit but it was not your fault 467298



- BB2080
by:

Very happy! 458105



- BB2080
by:

everything looks great and great shipping time. Thanks.. 345056



- BB2080
by:

Have hard to find parts and good,friendly people to deal with. 227144



- BB2080
by:

I pull a utility trailer several miles per year, having bearing buddies is amust.thanks for excellent service and prices. 224928



- BB2080
by:

These things really speak for their self they have been around for years, great quality. 221745



- BB2080
by:

Nice product great price with fast ship ping 175050



- BB2080
by:

great product, fit perfect, Thanks. 163255



- BB2080
by:

Very good price. Product look's well made. Fast delivery. Very helpful in selecting the right fit. Saved etrailer.com in my favorites. 109975



- BB2080
by:

High quality ... love em ... no need to constantly pop the hub to re-grease ... plating is exceptional ... great appearance 91128



- BB2080
by:

Great online buying experience. The order was processed immediately,product shipped fast and pricing was very reasonable. I would definitely recommend etrailer.com to friends. 45216



- BB2080
by:

Very good people to work with ,the product really work s used them on my trailers no problems. 33166



- BB2080
by:

Bearings fit nice and snug. Should last a long time. 23606


17
17

Ask the Experts about this Bearing Buddy Trailer Bearings Races Seals Caps

Do you have a question about this Trailer Bearings Races Seals Cap?


  • What Size Bearing Buddy Fits My 7000 lb Axles
  • Based on your 7000lb axles, it has a grease cap flange diameter of 2.722". As a result Bearing Buddy Bearing Protectors # BB2717SS will work for your axles.
    view full answer...

  • Bearing Buddy Sizes Compatible for Hub 2 Inch Inner Diameter
  • There are a couple of sizes close to your 2 inch diameter. If you measured with a digital caliper that goes to the thousandths like # 301-17068 then that will be much easier to determine the fit. We have the 2.047 inch # BB2047 in chrome plated or # BB2047SS in stainless steel. We also have the 2.080 inch # BB2080 in chrome of # BB2080SS in stainless steel. If it is smaller we have the 1.80 inch # BB1980A-SS in stainless steel. The fit should be snug to prevent leaks...
    view full answer...

  • Will Bearing Buddy Model 2080 Fit Hub with 52mm Grease Cap
  • The Bearing Buddy Bearing Protectors - Model 2080 # BB2080 referenced in your question may fit the hubs on your Venture trailer, however instead of measuring the grease cap, the best way to ensure these will be the correct fit is to measure the diameter of the hub bore. I recommend using a digital caliper like # PTW80157 to get the most accurate measurement possible. These Bearing Buddies are designed for 2.080 inch hub bores. If this is the measurement you get on your existing hubs,...
    view full answer...

  • Bearing Kit, 10 x 2-1/4 Hydraulic Brake Shoes, and Grease Cap for Dexter 3500 EZ Lube Axle
  • All of our bearing kits, like the part # BK2-100 that was referenced, only include the inner/outer bearings, grease seal, and cotter pin/washer but I can help you get the other parts that you are needing as well. For 10" x 2-1/4" brakes we have the Redline Hydraulic Brake Shoe/Lining # BP04-120 which comes in a set for 1 wheel. Then for a grease cap if you could let me know what your hub bore measures (to the 3rd decimal like 1.234) I can help you select the correct size cap from...
    view full answer...

  • Bearing Buddies that Measure 2-1/8 Inches in Outer Diameter
  • When selecting bearing protectors the measurement needs to be as accurate as possible so you will need to use dial calipers. We have a digital set we use here for precise measurements. Since 2.24 is too large and 1.98 is too small the size in the middle is 2.08 like # BB2080. For replacement bras you would use # BB19B.
    view full answer...

  • Replacement Grease Caps for a Trailer Hub with 2-1/16 Inch Hub Bore
  • Instead of measuring the grease cap, measure the hub bore where the grease cap fits. You will need the most accurate measurement as possible so use dial calipers. You may find that you have a 2.047 inch bore so you could use bearing protectors like # BB2047SS. Or it could slightly larger, 2.080 like # BB2080. These are the 2 most likely sizes if you are coming up with 2-1/16 inches but measuring the hub bore with dial calipers would be the way to go.
    view full answer...

  • Bearing Buddy that Fits Trailer Hub Bore of 2.080 inches
  • The closest Bearing Buddy solution we have to fitting a trailer hub bore of 2.1 inches is the part # BB2080 which fits a bore of 2.080 inches. You might confirm your bore dimension with a digital caliper like part # PTW80157 to see if this would fit.
    view full answer...

  • Recommended Trailer Axle Bearing Dust Cap Compatible with 2.10 Inch Hub
  • That is not a typical grease cap/dust cover size, however we do have the Bearing Buddy Bearing Protectors # BB2080 which measure 2.08 inches. These caps actually make maintaining the bearings much easier and more convenient as well. I've attached a couple videos to assist. The precise measurement using a digital caliper like # PTW80157 or # 301-17068 is best.
    view full answer...

  • How to Measure a Hub Bore Diameter to Determine What Size Bearing Buddies Fit a Trailer Hub
  • To find the correct size Bearing Buddies you can take a set of calipers, dial or digital, and measure the diameter of the hub bore. Part # BB2047 fits a bore size of 2.047 inches. Part # BB2080 fits a hub with a 2.080 inch bore. You will need to measure your hubs to see what size they need.
    view full answer...

  • Bearing Buddy Availability for Hub Bore of 2.080
  • I wish we had a bearing buddy that would fit the hub you have, but none of the ones we carry will fit a hub with an inside bore of 2.125 (2-1/8 inches). You might try measuring the hub bore again with a digital or dial caliper to see if maybe you have a 2.080 hub bore. If that is the case you could use the # BB2080.
    view full answer...

  • How to Pick Out Bearing Buddies for a Trailer
  • In order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel and tire and remove the grease cap from the center of the hub. Usually it is a metal cap that is just lightly hammered into place. Use a screwdriver to pry off the cap. Clean the grease off and measure the opening. I have included a video demonstrating the Bearing Buddy. The Bearing Buddies # BB2080 that you referenced are for hubs with a 2.080 inch hub bore. When...
    view full answer...

  • Can Bearing Buddies be Used on a Travel Trailer
  • Bearing Buddies are intended for marine use but they can be used on a travel trailer. They'll help keep dirt and moisture out. You'll also gain the benefit of being able to grease the bearings using the Bearing Buddies because of the zerk fitting.
    view full answer...

  • Bearing Buddy Recommendation that is the Next Size Smaller than the # BB2240
  • The next smaller size Bearing Buddy from the Bearing Buddy part # BB2240 that you referenced would be the Bearing Buddy # BB2080. I attached a link to a page that has all of the Bearing Buddies we offer.
    view full answer...

  • Bearing Buddy Slightly Larger than the BB2047
  • The next size up from the Bearing Buddy # BB2047 is the part # BB2080. This Bearing Buddy should be just what you need if the # BB2047 is a tiny bit too small.
    view full answer...

  • Bearing Buddy Bearing Protectors for 2.1 Inch Hub Bore Diameter
  • The closet option we have available to your 2.1 hub bore measurement is with the Bearing Buddy Bearing Protectors # BB2080 in Chrome or # BB2080SS in Stainless Steel (for superior corrosion resistance). These are designed to fit a hub bore diameter of 2.080 inches. Since it's so close I recommend verifying your measurement with a digital caliper like # 301-17068 to get an exact dimension. I have attached a short video review that you can check out as well.
    view full answer...

  • Can Bearing Buddies Be Used on Travel Trailers
  • Although primarily designed for use in marine applications, using Bearing Buddies on your travel trailer would work just fine for you, and would provide the benefit of protecting your wheel bearings by excluding dirt and moisture. Due to the Zerk fitting, adding grease when needed will be easy, and you can check the fill level at a glance, both of which will extend the life of the bearings. Keep in mind that Ez-Lube spindles are not compatible with Bearing Buddies. You will want...
    view full answer...

  • Bearing Buddy Recommendation for a Hub Bore of 2.402 inches
  • For a Bearing Buddy designed to fit your 2.402 pilot hole on your hub you would want the # BB2441 or the stainless version part # BB2441SS. I attached a review video for you to check out as well. Pricing is below at the links.
    view full answer...

  • What Bearing Buddys Are Needed for a 2-1/16 Inch Hub Bore
  • The correct Bearing Buddy Bearing Protectors are going to be part # BB2080 for a 2.080" hub bore or part # BB2047 for a 2.047" hub bore. Therefore, you need to measure your hub more opening more precisely (to the thousandth of an inch) in order to determine which is the correct set of Bearing Buddy Bearing Protectors. The above measurement should be taken with a digital caliper.
    view full answer...


Do you have a question about this Trailer Bearings Races Seals Cap?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer bearings races seals caps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer bearings races seals cap information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
Tyler C
Installed by:
Jeff D
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924