Correct Bearing Buddy Bearing Protectors for 1996 Ranger 461 Boat Trailer
Updated 04/21/2022 | Published 04/19/2022
Products Featured in This Question
Question:
I need bearing buddies or equivalent for a 1996 ranger 461 single axle trailer, serial number 18WRT1918V1D66475 Not exactly sure what size? Thank you!
asked by: Randal S
Expert Reply:
In order to determine which Bearing Buddy Bearing Protectors you need you will need to measure the diameter of the hub bore on your trailer. I recommend using a digital caliper like the # PTW2993 in order to get an accurate measurement. Once you have this measurement you will be able to select the correct Bearing Buddy. For example, if you found that you had a 2.441" hub bore you could use the # BB2441.
I have attached a picture showing where you need to measure, along with a link to all of our Bearing Buddy protectors that can be filtered down by hub bore diameter.
(click to enlarge)
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2441 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.44 Inch
- 4400 lbs Axle
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Fulton Grease Cap - 2.333" Outer Diameter - Drive In
- Video: A Closer Look at the Fulton Grease Cap
- Q&A: 2.24" Grease Cap Replacement
- Shop: Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 2240 - Chrome Plated (Pair)
- Q&A: Trailer Wheel Seems Stiff, Not as Easy to Turn After Repacking Bearings with Grease
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Article: Most Popular Wheel Bearings
- Q&A: Inner Diameter of Tang Spindle Washers Close to 1-5/8 Inches
- Q&A: Who Makes The Strider Trailer Tires?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Is Included With The DeeMaxx Disc Brake Kit DE42FR?
- Q&A: How do I Remove My Old Reliable HD-1206 Hubs so I can Replace them with New Ones?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can I Swap My Coleman Mach Q 15 to the Furrion Chill with an Adapter, or do I Need a New Set-up?
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?