Grease cap fits trailer hubs with 3.255" inner diameter.
Features:
Specs:
Dimensional Information
| Part No. | Material Gauge | Flange Diameter (A) | Crown Height (B) | Flange Length (C) | Overall Height (D) |
|---|---|---|---|---|---|
| 1600 Series | |||||
| F001602 | 16 | 3.255" | 0.61" | 0.53" | 1.145" |
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to look at the Fulton drive-in grease cap with the 3.255 outer diameter. This grease tap will tap onto the end of your hub on your axle. It protects your wheel bearings from dirt and debris that could destroy your bearings. This one is a 16-gauge steel construction. It has nice corrosion resistant zinc plating over the whole cap. Again, this grease cap is designed to fit trailer hubs with the 3.255 outer diameter, and it is a drive-in installation.
The flange portion right here, you just tap until the flange goes into the hub and seats up against the ridge right there. The quantity is for 1. The flange diameter, which will be measured edge-to-edge here, is going to be right at 3.255. The flange length, which is the length of this flange that would tap into your hub, that is going to be right at 0.53 inches. The overall height from the bottom to the very top of the dome is going to get you right at 1.15 inches. That should do it for the review on the Fulton drive-in grease cap with the 3.255 outer diameter.
Good stuff
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.