Replacement 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
Updated 07/20/2026 | Published 07/19/2026 >
Products Featured in This Question
Question:
i have a 2022 starcraft super light 242rl and my rear axle is bent, i need to know which axle to purchase hub 86.5, spring center 68.5 serial # 134279464077 over swung
asked by: Jeffrey K
Expert Reply:
Thanks for the information Jeffrey! To replace your StarCraft's axle, you'll need the Lippert Trailer Axle Beam item # LC63PK. This axle matches your measurements perfectly; 86.5" hub face, 68.5" spring center, and designed to replace a 3,500 lbs axles.
The Lippert Axle item # LC63PK has spring seats mounted in the underslung position and 4-bolt brake flanges installed. You'll be able to reuse your existing hubs and brake assemblies.
You said your axle was over swung, which I'm assuming is a typo and you meant overslung and your axles are mounted below your leaf springs. You'll also need the Dexter Trailer Springs Over-Under Conversion Kit item # K71-384-00.
The Over-Under Conversion Kit item # K71-384-00 will allow you to convert the spring seats on the Lippert Axle item # LC63PK so you can mount the axle below your leaf springs. We don't carry axles with the spring seats installed for an overslung setup and you can't weld on new ones to the other side because of the bend in the axle.
The Over-Under Conversion Kit item # K71-384-00 may be a part you weren't expecting having to purchase, however when you replace your axles you have to get new U-Bolts like the 3,500 lbs 5-1/2" Long U-Bolts item # APUBR-1. It is a small cost increase but it's a lot less expensive than modifying or having to customize an axle.
What kind of roads do you typically travel and do you know how you bend your axle?
You can add this information, along with any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
Lippert Trailer Axle Beam with Super Lube Spindles - 86.5" Long - 2,500 lbs to 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 68-1/2 Inch Spring Center
- 86-1/2 Inch Hub Face
- No Drop or Lift
- Lippert
more information >
Continue Researching
- Q&A: Replacement 2,500 lbs - 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Search Results: dexter axle flip kit
- Search Results: stairs
- Search Results: rv underbelly
- Search Results: hitch clamp
- Search Results: rv sewer hoses
- Search Results: rv bumper end caps
- Shop: Lippert Trailer Axle Beam with Super Lube Spindles - 86.5" Long - 2,500 lbs to 3,500 lbs
- Search Results: dexter axle flip
- Shop: etrailer Anti-Rattle Hitch Collar for 2.5" Hitch Receivers
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: What Upgraded Equalizer Can I Use to Replace My 5 5/8" Long Standard Equalizer?
- Shop: Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Specialty Recreation Offset Mount RV Faucet Bezel - White
- Shop: Karrier ST205/75R14 KR53 Radial Trailer Tire - Load Range D
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Does Axle have to be Removed from Trailer to Install an Over/Under Conversion Kit
- Q&A: Over/Under Conversion Kit For 2022 Lance 1995 Travel Trailer
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Can MORryde CRE3000 be Used with 31 inch Wheelbase and 24 inch Leaf Springs
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Article: 5 Things to Know About Weight Distribution Hitches



