Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Trailer Brake Shoe Pads for electric trailer brakes
Normally seen on Dexter 2.8K axle. Axles manufactured after September 1999 will accept 10" x 2-1/4" brakes.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement shoe and lining for the Dexter 10" x 1.5" electric brake assembly. This part will replace the shoe and the lining for your 10" x 1.5" electric brake assembly for 2,800 pound axles. On axles that are manufactured after 999, they will also accept 10" x 2.25" brakes. These here are designated 10" x 1.5" and where they get those measurements from, the 10" is the diameter. When these are installed on your brake assembly, bolted down, if you measured from this shoe directly across to this shoe, the diameter is 10". The 1.5" is actually the width.
If we put a ruler on it you can see 1.5" for the width of the pad. To know which position these go on your brake assembly, you want to look at the size of the lining. If you look at that, the shorter lining, which is this one right here would be the primary shoe. That will face the front of the trailer. The one with the longer lining, that's the secondary shoe, that will be at the rear, or face the back of the trailer. They do use an automotive grade friction material which is molded to the brake shoes.
The lining is fully bonded, it's not riveted to the shoes, so it gives you a lot longer life, more braking torque. This part does come with the two hole bound springs and clips are all included. That should do it for the review on the replacement shoe and lining for the Dexter 10" by 1.5" electric brake assembly.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Mike B.
4/27/2018
So far all seem to be working well. Thanks
John
7/1/2020
direct replacement for what was on the axle.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Randy
7/12/2022
Great!