Replacement 10 Inch x 1-1/2 Inch Trailer Brakes For 1998 Nash 20N With Welded On Brake Backing Plate
Updated 02/28/2023 | Published 02/27/2023
Products Featured in This Question
Question:
I have a 1998 Nash 20N and the brakes are welded to the axels. Im looking to replace the brake components and wanted to confirm I have the right replacement parts. 10inch x 1-1/2inch Electric Brake Shoe/Lining One Wheel - bp04-065 Replacement Brake Spring Set for Dexter 10inch x 1-1/2inch Electric Trailer Brake Assembly - K71-362-00 Replacement Magnet Kit for 10inch Electric Trailer Brake Assemblies - 3,500 lbs - AKBRKR-M10
asked by: Stefan B
Expert Reply:
Based on the images with the measurements you sent the Brake Shoe/Lining # bp04-065, Brake Spring Set # K71-362-00, and Magnet Kit # AKBRKR-M10 are the correct replacement parts for the brakes on your 1998 Nash 20N.
We do have the Brake Mounting Flange # 4-35 which you can have welded to your axle. This will allow you to replace the Brake Assemblies # K23-472-473-00 which is typically easier and will help you if your brakes become damaged on the side of the road. Then you will be able to completely remove the brakes to have new ones put on rather than having to have the brakes cut off on the side of the road.
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- RH
- Brake Shoes
- 10 x 1-1/2 Inch
- Dexter
more information >
Continue Researching
- Shop: Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies - 3,500 lbs
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: Breaking Down the Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Floor Mats
- Search Results: replacement trailer brake magnet
- Search Results: trailer floor screws
- Video: Repair Kit for Dexter Electric Brake Assemblies Feature Review
- Video: Comprehensive Review: Brake Mounting Flange for 2-3/8" Round Axle
- Search Results: trailer brakes
- Video: Let’s Check Out the Replacement Trailer Hub Bearing
- Q&A: Replacement for Dexter 8-283 Hub/Drum
- Q&A: Replacement Bearings, Races, Grease Seal and Tools Needed For Dexter 8-283 Brake Drum/Hubs
- Q&A: Can a Hayes 10 x 1 5/8" Braking Assembly W/ No Mounting Flange Be Converted to a Standard Flange
- Video: What to Know About the 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Q&A: Lug Nut Torque Setting for 14-Inch Steel Trailer Wheels on 1/2-Inch Wheel Studs
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Recommended Brake Magnets For 10 x 1-1/4 Inch Manual Adjust Hub/Drums
- Q&A: Can Dexter 10 x 1-1/2 Inch Electric Drum Brakes be Replaced with 10 x 2-1/4 Inch Brakes
- Search Results: l44610
- Search Results: race l44610 trailer bearings races seals caps
- Search Results: race lm67010 trailer bearings races seals caps
- Search Results: trailer tires and wheels
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearing Kit 3500LB Axle - DX76ER
on Accessories and Parts
