Replacement Brake Assembly Parts for 2800 lbs Philips/Dexter Axle with 1-1/4 Inch Deep Hubs

Updated 04/08/2019 | Published 04/05/2019

Products Featured in This Question

10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)

(106)

$54.37

Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K

(31)

$25.67

Brake Mounting Flange for 2-3/8" Round Axle

(25)

$25.51

Replacement Trailer Brake Magnet Kit for 7" Brake Assemblies

(31)

$41.73

Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs

(1554)

$267.07

Replacement Brake Spring Set for Dexter 10" x 1-1/2" Electric Trailer Brake Assembly

(15)

$28.27

Question:

2800 lbs max load philips/dexter axle I have the above axle. Dont know what type trailer its off of or year.The backing plate is welded to axle. 10 by 1 1/2 shoes. all parts are in good shape, but I do need new magnets and the retainer for guid plate on anchor post. If you have a spring kit I would replace them to. If they come through I am trying to send pictures

asked by: Charles D

Helpful Expert Reply:

You will want the Replacement Brake Spring Set for Dexter 10" x 1-1/2" Electric Trailer Brake Assembly # K71-362-00. Then you will want the Replacement Trailer Brake Magnet Kit for 7" Brake Assemblies # BP01-068 due to the thinner hubs instead of the traditional 10 x 2-1/4 inch hubs.

That guide for the anchor post is not available as a replacement part from any of our manufacturers. Your only other option is to replace the assemblies with the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,000 lbs # K23-472-473-00 which would require welding a brake flange like # 4-34 or # 4-35

expert reply by: Jason S