Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the brake shoes for your 10" x 2-1/4" manual-adjust, electric brakes. Includes shoes for one brake assembly. Fits Dexter, Fayette, and Foreman electric brakes.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the 10 inch by 2 and a quarter inch electric brake shoe and lining for 3500 pound axles. This part is for 1 wheel. These trailer brake shoe pads are for electric trailer brakes. They are designed to fit most 3500 pound axles. They will fit the Dexter, the Fayette and the Foreman 10 inch by 2 and a quarter inch electric brakes. It does include the primary shoe, the secondary shoe, and it will include the 2 hold down springs with the pins. The primary shoe is usually the front shoe.
That will usually have the smaller pad on it when compared. You can see the secondary shoe will usually be the larger pad. You have to remember that when these are installed, the smaller, or the primary shoe will be to the front, will point towards the front of the trailer. You want to make sure when you assemble these that the smaller shoe goes in the front and the larger shoe will go on the rear. These parts are certified by US SAE standards and CSA standards, which are the Canadian standards. These are designed to be used with 10 inch drums.
When we do say 10 inch by 2 and a quarter, what we're basically saying is you can determine the size brake assembly you have by measuring it when it's all installed on your trailer. When these are all installed, if you measure the diameter from the pad to this pad, straight across, should measure 10 inches. Then the 2 and a quarter is the actual width of the brake shoe lining itself. So you see there 2 and a quarter. When these are installed, if you have this all installed on your trailer on the brake assembly, with them installed, if you measured across you'd know you need a 10 inch and if you measure the width it'd be 2 and a quarter inch. That should do it for the review of the 10 inch by 2 and a quarter inch electric brake shoe and lining for 3500 pound axles for one wheel.
Average Customer Rating: 4.7 out of 5 stars (65 Customer Reviews)
Replaces the brake shoes for your 10" x 2-1/4" manual-adjust, electric brakes. Includes shoes for one brake assembly. Fits Dexter, Fayette, and Foreman electric brakes.Exact Replacement. 1993 Big Tex car hauler with tandem Dexter 3500# axles. Rear axle has Dexter 10" electric drum brakes, the shoes of which were 2-1/4" wide and not the self adjusting version. The etrailer replacement brake shoes appear to be exactly the same as the shoes they are replacing (which could be OEM). Everything fit exactly the same. The front and rear shoes are different so pay attention during disassembly. Dexter lists the bearing seating procedure on their website for re-assembly. Axle nut uses a 1-1/2" socket. If you want to add "Bearing Buddies", the 1.98" size fit correctly. Replacing brakes is not my favorite sport, but these parts made it as easy as possible.
Installed the brake shoes on my 1978 Prowler travel trailer as replacements for the original Dayton Fayette shoes with no problems.
Once correct part identified they were shipped and received in a timely manner. Have installed half of the order look to be more then adequate. Thanks for the help in identifying the correct parts.
Joe
7/2/2023
Still working fine after a year. Will continue to use entailed for all my trailer parts.
I bought brakes for my car trailer last year and installed them as soom as I got them.
Living at 1500 feet of elevation I need good brakes going down the hills when I leave my house....no problems braking since I installed the new linings. Great price, great product, what more can I say.
I'm in the middle right now because 2 of the shoes had a fair size piece of the braking pad portion break away from the rest. They were very fast to send replacements so I have nothing but praise for that. I have done business with these people before and have had very fine experiences. I suspect this was just a fluke thing. I will order from here in the future.
Etrailer is amazing. I could not find the right camper brake shoes in my area. I called etrailer and talked with Christina and she was amazing at helping me get the right ones . I even got a email from her telling me my order was shipped and delivered. Good people. Fast shipping . Definitely will be ordering from them in the future
Easy installation. Perfect fit, works great. No complaints.
Chris F.
5/26/2017
Still working Great!! Still no complaints!
Bought to replace original ALKO brake pads. Had to drill new holes for ALKO springs to work. Pad material slightly smaller than original ALKO pad. Otherwise seem to work OK.
1. Excellent Youtube video clip on changing these brake shoes - very helpful.
2. Product a perfect replacement for a 28 year old part!
3. Same day processing/shipping order - arrived when promised - greatly appreciated!
Will use etrailer again - great service and parts!
Excellent service and shipping. Top hole for return spring had to be slightly elongated, may have just been my springs. Otherwise look like good quality shoes, came with hold down springs and pins.
Hi Kelly I am very pleased with the brake shoes that I installed on my 1980 Prowler travel trailer. Shipping time was only 4 days. Would buy again from you. 5 stars. Bruce
On line ordering is the way to do business. The shipping was quick and the part fit perfectly.. I enjoy doing business with etrailer.com.
Thank you!!
Ordered Brake Shoes for a Landscapers Trailer. All I needed was the diameter of the drum and the depth. Etrailer set me shoes in just a few days that fit my trailer exactly.
the parts I ordered worked very well and the shipping was good also I will order from etrailer.com again
Products arrived quickly. Trailer brake shoes and breakaway installed easily and worked well.
These shoes did not have self adjusting studs on them so I had to install without self adjusting mechanisms. I will have to adjust them manually when they need adjusting. I realize I might have missed something when ordering but I did not see any other option.
Rachael H.
7/29/2019
I have provided a link to the Nev-R-Adjust electric brake shoes that we currently carry. The self adjusting version of the 10-2-14 shoes that you bought are the # K71-682 for the right hand side and # K71-681 for the left hand side.
Helpful Links
Accessories-and-Parts/Dexter-Axle/K71-681.html
Accessories-and-Parts/Dexter-Axle/K71-682.html
dept-pg-Accessories_and_Parts-pt-Electric_Drum_Brakes-hs-10_x_2~1%7C4_Inch-pc-Brake_Shoes.aspx
I am very pleased with the service and quality of the parts.
i recommend etrailer.com for all your trailer needs.
Thank you very much.
Very good product and fast delivery. No problems. My brakes were borderline needing replaced and the price was good. No over charging on delivery either.
Fit my car hauler perfectly. Typical etrailer.com service; good price, great communication, and speedy shipping.
The brake shoes arrived on time and they were the parts I had ordered. Thanks etrailer for good service!
Products were shipped promptly. The brake shoes fit the axle but required one hole to be elongated to accept the upper return spring.
i was happy with service rep lazer and brake product and price. i will use you for future needs
quick shipping . Shoes fit as they should. By the time I got all the parts and adjusters all cleaned up, I should have maybe purchased the complete setup for a few dollars more
The brake shoes fit just like the OEMs that were on. Best price I could find.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve P.
7/30/2015
Brakes are working fine