Replacement Brake Magnets for 10" x 1-1/2" Brakes
Updated 05/26/2021 | Published 05/24/2021
Products Featured in This Question
Question:
I have an older camper with 10inch X 1.5inch shoes .. like your Item # bp04-065. What is the appropriate magnet for this ? There are 2inch ROUND MAGS IN THERE NOW, NOT SURE IF THEY ARE THE RIGHT ONES. The backing plates are welded on, or I would upgrade the entire system. Thanks
asked by: Russ C
Expert Reply:
The Replacement Magnet Kit for 10" Electric Trailer Brake Assemblies - 3,500 lbs # AKBRKR-M10 are compatible with most brake assemblies and would be the only available brake magnet replacement we have for 10" brakes. If you can let me know what brand your brakes are I might be able to confirm this for you.
The 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel) # bp04-065 you were looking at to replace the shoes are designed to be a fairly universal replacement part as well, and they will replace the shoes on most 10" x 1-1/2" brake assemblies.
Product Page this Question was Asked From
10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- RH
- Brake Shoes
- 10 x 1-1/2 Inch
- Dexter
more information >
Continue Researching
- Q&A: Replacement Brake Assembly Parts for 2800 lbs Philips/Dexter Axle with 1-1/4 Inch Deep Hubs
- Q&A: Spring Mount and Magnet Clip on a 10 Inch by 1-1/2 Inch Electric Brake Shoe
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Q&A: Can 10 x 2-1/4 Inch Electric Brakes Replace 10 x 1-1/2 Inch Assemblies on Dexter 2.8K Axle
- Q&A: Can I Switch From 10" x 1-1/2" Brakes to 10" x 2-1/4" Brakes on a 2013 Keystone Trailer
- Video: Dexter Axle Trailer Brakes BP01-110 Review
- Video: Ultimate Overview of the Mounting Hardware for 10" Brake Assemblies
- Video: A Closer Look at the Magnet Retainer Clip for Oval Magnet
- Video: etrailer Trailer Brakes AKBRKR-MC Review
- Video: Review of Dexter Trailer Brakes - Replacement Brake Spring Set - K71-362-00
- Video: etrailer Trailer Brakes AKBRKR-SP Review
- Search Results: bp04~065
- Search Results: bp01~110
- Search Results: l68149
- Search Results: akbrkr~as~1012
- Shop: Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 10
- Shop: Replacement Magnet Retaining Clips for 10" and 12" Electric Trailer Brakes - Qty 10
- Shop: Replacement Brake Spring Set for Dexter 10" x 1-1/2" Electric Trailer Brake Assembly
- Shop: Replacement Adjuster Spring for Dexter Electric Brake Assembly
- Shop: 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Shop: Replacement Spring Kit for 10" and 12" Manual-Adjust Electric Trailer Brake Assemblies
- Shop: Mounting Hardware for 10" Brake Assemblies
- Q&A: Replacement Brake Shoes for Dexter 10" x 1-1/2" Brake Assembly 23-472-00 and 23-473-00
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: Most Popular Wheel Bearings
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
on Accessories and Parts
