See what our Experts say about this Yakima Roof Rack

• Is Weight Capacity of Yakima CoreBar Crossbars Per Bar or for Pair
  The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity. Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle.
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Recommendation on a 1 or 2 Kayak Carrier for a 2010 Subaru Forester
  If you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches. I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the...
  view full answer...
• Does Thule DockGrip Kayak Rack Fit 2018 Subaru Outback Limited Factory Crossbars
  Yes, I checked with Thule and for the factory crossbars of your 2018 Subaru Outback Wagon the DockGrip part # TH895 is a confirmed fit and will work well.
  view full answer...
• What is Advantage of Top Channel on Yakima JetStream Bar over Core Bar
  The top channel on the JetStream bars have the advantage of offering an easier/cleaner way to attach roof rack accessories. A lot of roof rack accessories are now being made to attach to a channel on the top of the bar. The CoreBars are a less expensive and still a really great bar but it comes down to what type of attachment you prefer. If you let me know what vehicle you have I can help get all of the parts together to install either style of rack on your vehicle.
  view full answer...
• Roof Rack and Kayak Load Assist Recommendation for 2011 Chevy Equinox with Raised Side Rails
  There is a solution for you, but the issue with the BoatLoader EVO the crossbar spread as well as its 80 lb weight capacity, which is less than your 87 lb fishing kayak. Instead, for your 2011 Chevy Equinox with raised side rails I recommend the Rhino-Rack Roof Rack, which will give your Equinox a very functional, durable rack that will allow you to use a load assist. This roof rack uses aero bars and consists of: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack SX Series...
  view full answer...
  
• Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point Roof
  The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
  view full answer...
• Which Rook Rack Would be the Most Quiet on My 2024 Lexus LX600 F Sport?
  Hello David, Congrats on the new Lexus, I really like the new grill designs I have been seeing on the SUV's. I understand your concern with the noise as some systems can be quite noisy. When it comes the the rail systems you definitely get what you pay for. I am showing that the 2024 Lexus LX 600 comes with the flush mounted rails (please refer to the image that I attached) so you will want the Thule WingBar Evo Roof Rack for Flush Rails - Aluminum - Black - Qty 2 # TH49GA (for silver...
  view full answer...
• Highest Capacity Roof Rack for a 2018 Subaru Outback Touring
  The Thule roof racks available for the 2018 Subaru Outback have a capacity of 110 pounds no matter which bar style is being used. There are roof racks that are rated higher though so to maximize the capacity of the vehicle (which according to the owner's manual is 176 pounds on models that have factory side rails that run front to back or 150 pounds for models with crossbars integrated into the rails). All of the Yakima roof rack options are rated for 165 pounds. For a Yakima roof rack...
  view full answer...
• Can I Use Yakima CoreBars On A 2024 Hyundai Tucson With Flush Rails?
  Hello Mike. According to Yakima, the SightLine Towers are the only option for the 2024 Hyundai Tucson. You can use the Corebars, and a 50" bar is recommended for the 2024 Tucson. You will also need the SightClip 25 # Y27AR and a set of SightLine Towers # Y64AR. We do have some videos showing installation of the SightLine roof rack. I have provided links to a couple different videos for you below.
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Will the Gutter Mounts # RL150S13-3 Attach to a Rhino-Rack Pioneer Platform?
  I went ahead and reached out to my contact at Rhino-Rack, and she confirmed that the Rhino-Rack Roof Rack Legs - Gutter Mount - 5-15/16" Tall # RL150S13-3 will technically attach to a Rhino-Rack Pioneer platform. However, Pioneer Platforms are customized to fit certain roof dimensions, and I cannot recommend which platform you will need for your vehicle. In order to give you the proper fitment and recommendation, please feel free to respond to this answer with the year/make/model/roof...
  view full answer...
• Can I Convert a Hullavator 897XT to Work w/ Yakima CoreBar Crossbars?
  I am sorry the older Hullavator 897XT you own can not be converted to mount on Yakima CoreBar Crossbars like item # Y00421 because there is no t-slot. I confirmed this information with Thule. The only solution I have for you is to upgrade to the new Hullavator item # TH898 you were looking at.
  view full answer...
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• Recommended Yakima Round Bars for a 2025 Toyota RAV4 W/ Factory Flush Rails
  Hey A, for your 2025 Toyota RAV4 with factory flush rails you can use the Yakima SkyLine Roof Rack for Fixed Mounting Points # Y55FB which includes the Yakina round bars, the towers, and the round bar adapter. These towers will attach directly to your flush rails on your RAV4, so you won't need anything else to get it to work. Let me know if there is anything else I can do for you!
  view full answer...
• Bike Rack Recommendation for a 2017 Honda Civic
  Hello Tonya - Thanks so much for letting me know that your 2017 Honda Civic is a 4-door sedan. Once I know if you have a center exhaust on your vehicle, I can go ahead and recommend some great 2-bike racks for you!
  view full answer...
• Is Thule Hullavator Kayak Carrier Compatible with Yakima CoreBar Crossbars
  The Thule Hullavator Pro Kayak Carrier # TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit # TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work correctly and avoid contacting your vehicle. I have attached a photo showing how to make sure your CoreBar is long enough. If you happen to need longer CoreBar crossbars we have them available here: 50" - # Y00421 60" - # Y00422 70" - # Y00423 80" - # Y00424
  view full answer...
  
• Loadstop Compatibility With Yakima CoreBar And Universal Mighty Mounts
  Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
  view full answer...
• Roof Rack for 2017 Chevy Spark
  There is a roof rack option for your 2017 Chevy Spark but the SportRack # SR1002 is not a fit. Instead, I recommend an option from Yakima. This rack consists of the Yakima CoreBar Crossbars # Y00421, BaseLine Towers # Y28TR, and Fit Kit # Y06124; you can lock this roof rack with SKS Lock Cores # Y07204. This will give you an aero roof rack that helps reduce the amount of wind noise you might otherwise encounter.
  view full answer...
  
• Parts Needed to Swap the Yakima CoreBar Crossbars from an Acura MDX to a 2022 BMW X6
  Assuming you're wanting to use the Yakima CoreBar Crossbars # Y00421 you're looking at, then yes you're just going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06179, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06161 as well as the BaseLine Towers for Yakima Crossbars # Y28TR.
  view full answer...
  
• Difference Between Yakima CoreBar and JetStream Roof Rack Crossbars
  There are a couple of differences between the two. The JetStream bars like # Y00425 are made of extruded aluminum while the CoreBars such as the # Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has a higher capacity. The primary difference is that the JetStream bars feature the T-Slot channel at the top that allows quick and easy accessory installation, while accessories used with the CoreBars would need to clamp around the crossbar. The...
  view full answer...
• Will Thule Hull-A-Port Roof Kayak Carrier Fit Yakima Core Bar Roof Rack
  Yes, the Thule Hull-A-Port J-style kayak carrier # TH834 will fit fine on Yakima Core Bar roof rack crossbars. These bars, such as 50-inch set # Y00421, have an aero profile that is fully compatible with the hardware on the Hull-A-Port.
  view full answer...
• What Crossbars Do I Need for a Thule Motion XT XL on My 2017 Lexus GX 460?
  In order to mount the Thule Motion XT XL # TH629806 on the factory flush rails of your 2017 Lexus GX 460, I recommend the Yakima CoreBar Crossbars - Steel - Black - 50" # Y00421. One of the great features of the CoreBars is that it combines the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. The Thule Motion XT XL will be able to clamp onto the CoreBars. For a complete roof rack system for your 2017 Lexus GX 460, I recommend these...
  view full answer...
• Parts Needed to Mount Yakima Space Cadet Cargo Box on Roof of 2008 Honda Odyssey
  In order to mount your Yakima Space Cadet Cargo Box to the roof of your 2008 Honda Odyssey you will indeed need to add crossbars. For your Odyssey that features the factory raised side rails I recommend the Yakima CoreBar System. This roof rack consists of # Y00421 for the two 50 inch CoreBar Crossbars and # Y33TR for the TimberLIne Towers that will attach to the side rails. I have attached a short video demonstration on this roof rack that you can check out. As long as you still have...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Do You Recommend the Thule Motion XT XL or the Thule Motion XT XXL for My 2021 Nissan Rogue?
  In order to determine the compatibility of either the Thule Motion XT XL # TH629806 or the Thule Motion XT XXL # TH629906, it truly depends on if you have a bare roof, raised rails, or a factory roof rack currently installed. The reason why this matters is because not only do crossbars come with different heights and widths, but your roof has different available length based on what roof setup you have. The roof setup is important in determining if you can fully open the rear hatch of your...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Do You Have a Roof Rack for a 2017 Nissan Murano S?
  Yes, we do carry a crossbar system that will work with your bare-roof 2017 Nissan Murano S. For a complete system, you need the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06126 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - (optional for extra security) Yakima Same-Key System...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Recommendation for Transporting 5 Bikes on a 2019 Ford Fiesta Hatchback
  The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
  How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible. If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car. To add this kit to your vehicle,...
  view full answer...
• Components Needed To Mount Yakima RoundBars On A 2024 Kia Seltos With A Naked Roof
  Hey Jason, Yes, you can get the Yakima BaseLine Roof Rack for Naked Roofs # Y64PJ without the crossbars, you'll just need to order each component separately: BaseLine Towers for Yakima Crossbars # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06130 (front clips) BaseClip Fit Kit # Y06132 (rear clips) If you need anything else or if you have factory rails let me know.
  view full answer...
• Yakima Jetstream Roof Rack for Use with Thule Hullavator TH898 on 2018 Toyota Highlander
  The Thule Hullavator load-assisted kayak carrier # TH898 will directly mount onto just about any roof rack bar shapes, including round, square, aero, elliptical, most factory crossbars, and most crossbars with top "T-slot" channels. Yakima Jetstream bars will work fine so long as they are long enough. The most important compatibility requirements for mounting the Hullavator are that the cross bars extend out past the rack legs and by no less than 4 -inches and that they be at least 24-inches...
  view full answer...
  
• Recommended Kayak Carrier for 2020 Mazda CX-5
  The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
  view full answer...
  
• Recommended Roof Rack For A 2021 Kia Seltos With A Naked Roof
  Yes there is, so for your 2021 Kia Seltos I recommend taking a look at the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 & # Y06132. The great part about this rack, apart from the 165-lbs weight capacity, is that it will also work great with naked roofs like what's on your 2021 Kia Seltos by using the DropHook clip holder. I have also included an installation video on...
  view full answer...
• Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak Carrier
  In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
  view full answer...
• Comparing Yakima Baseline and Skyline Towers on 2015 Mazda CX-5
  When comparing the height of each option, the lowest Yakima Roof Rack for your vehicle consists of the Yakima RoundBar SL Adapter # Y03536 to utilize your previous Yakima round bars, the BaseLine Towers # Y28TR, the BaseClip Fit Kit # Y06130 and # Y06132. Overall this system will be about an inch shorter than the Skyline tower and base option.
  view full answer...
• Will the Yakima SteelHead Roof Mounted Bike Carrier Fit Aero Crossbars on a 2017 Toyota Highlander
  In order to use the Yakima SteelHead Roof Mounted Bike Carrier on your 2017 Toyota Highlander you would need to install a round bar system like the Yakima Roof Rack System part # Y00408, part # Y53TR, part # Y03536, and part # Y00242 if you have flush side rails or the Yakima Roof Rack System part # Y00409, part # Y28TR, part # Y03536, and part # Y06130 if you have a bare roof. If you want to keep the roof rack you have now then I recommend selling the SteelHead and buying the Yakima...
  view full answer...
• Base Clips For Yakima Roof Rack Towers On A 2018 Toyota Corolla
  It looks like all of the Yakima roof racks that are confirmed to fit your 2018 Toyota Corolla use BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06170. To confirm, you can give me more information about your roof rack that you have and I will make sure this is the correct clip set. I have attached a demonstration video to show you how these clips install.
  view full answer...
• Will the Malone DownLoader Fit on Yakima Roof Rack Crossbars
  Yes, the Malone DownLoader # MPG114MD-351XL is designed to fit on virtually all available aftermarket crossbar shapes and most factory bars, so this would work well with a Yakima roof rack like the one for a 2016 Avalon that uses parts # Y00425, # Y28TR, # Y06130, # Y06131. The DownLoader is an awesome solution to help make loading and unloading your kayak a breeze, and the system comes with cam buckle load straps to help you secure the boat. I've linked some review videos of these parts...
  view full answer...
• Roof Rack Recommendation to Carry Thule Pulse Box on 2018 Toyota Highlander
  In order to carry the Thule Pulse Large Rooftop Cargo Box # TH615 on your 2018 Toyota Highlander you will need crossbars that are perpendicular to your vehicle body so that the box can be parallel with the vehicle body. I really like the Yakima JetStream roof rack system because the crossbars are higher quality with that aero-style design and the legs have adjustments so you get the best fit possible. I'm guessing you have a naked roof but in the event that you do have the flush mount rails...
  view full answer...
• Yakima Roof Rack Landing Pad 16 Wont Line Up On 2019 Toyota Highlander
  There are two roof configurations on a 2019 Toyota Highlander, bare roof and flush side rails. The Landing Pad 16 part # Y00242 is designed for models with flush side rails. If you have a bare roof you need to use the BaseClip Fit Kit part # Y06130. I think you might be looking at the pre-drilled holes in the roof used to attach the flush side rails from the factory and if so these can't be used and you would have to use the rack for bare roof models. I have attached a video below of the...
  view full answer...
• Yakima Roof Rack Components Recommendation to Fit 2019 Mazda CX 5
  The Yakima Landing Pad 19 # Y00245 that you referenced has been confirmed by Yakima to fit the Skyline and Control Towers like you mentioned. Glad it worked for you as well! For the 2019 Mazda CX-5 Yakima recommends the BaseClip part # Y06130 and part # Y06154 when used with JetStream bars # Y00425 and BaseLine Towers part # Y28TR.
  view full answer...
• Recommended Roof Rack to Use the Yakima SideWinder on a 2018 Toyota Highlander LTD
  I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071. If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130. For flush mount rails you would instead need the 50" JetStream Bars # Y00425,...
  view full answer...
• Best Roof Rack and Kayak Carrier for a 2019 Hyundai Tuscon w/ Bare Roof
  I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier...
  view full answer...
  
• Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top Tent
  I would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Recommended Roof Crossbars and J-Style Kayak Carrier for a 2018 Toyota Corolla
  We have just what you need for your 2018 Toyota Corolla! I recommend checking out the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, & the BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06130 & # Y06170. These crossbars will easily attach to your Corolla's naked roof, has a 165-lbs weight capacity, and will allow you to use a set of J-Style kayak carriers like the Thule Compass Kayak Roof Rack w/ Tie-Downs # TH890000. Since you're interested...
  view full answer...
• Rear Yakima Roof Rack Bar Sits Higher than Front Bar on a 2016 Toyota Avalon
  You will want the Yakima roof rack on your 2016 Toyota Avalon as level as possible, but due to the different strength points on a roof and the differing heights of the towers it isn't uncommon for crossbars to be a little out of level with each other. They shouldn't be so far out of level that is causes issues with accessories fitting though, which is the main concern. With all of that being said, it is always a good idea to double check your installation just to make sure you have everything...
  view full answer...
• Can Yakima SkyRise Tent be Used with 2018 Mazda CX-5 AWD
  The Yakima SkyRise Tent # Y07436 will work great on your 2018 Mazda CX-5 but you will need a roof rack with at least a 165 lb capacity. If the roof of your 2018 Mazda CX-5 has flush rails that run front to back you'd want the Yakima Jet Stream rack part numbers # Y00425, and # Y64AR, # Y39AR If you have a naked roof you'd want the part numbers # Y00425, # Y28TR, # Y06130, and # Y06154. If you have rails that run front to back that are raised up you'd want the Malone rack part # MPG215....
  view full answer...
• Roof Rack System Similar to the Yakima Whispbar for a 2017 Subaru Legacy
  I do have a similar roof rack system for your 2017 Subaru Legacy but the Yakima Whispbar Roof Rack System has since been discontinued in favor of the Yakima JetStream Roof Rack System. In order to mount the Yakima JetStream Roof Rack System to the roof of your vehicle you will want to use part # Y00426, part # Y28TR, part # Y06145, and part # Y06130. I have added a review video of this system for you as well.
  view full answer...
• Recommended Roof Rack For A 2019 Toyota Highlander To Carry A Thule Hullavator 898
  In order to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading, part # TH898, on the roof rack of your 2019 Toyota Highlander, the crossbars need to extend between 4" and 8" past the the towers/feet. My recommendation would be to go with a 60" crossbar for your roof rack. I have two roof rack recommendations for you. The first rack is for a Highlander with flush rails. It will consist of the following items: Yakima CoreBar Crossbars - Steel - Black...
  view full answer...
  
• Recommended Rack For 2016 Toyota Highlander For A Thule Hullavator And Rear Loading Kayak Carrier
  In order for you to carry two kayaks, one on a Thule Hullavator, part # TH898, and the other a rear loading kayak carrier, you will need longer crossbars. Your crossbars will also need to extend between 4" - 8" beyond the tower, foot, leg of your roof rack. You will not be able to use a factory roof rack with a Thule Hullavator. If your 2016 Toyota Highlander has flush rails, your recommended roof rack will consist of the following: Thule WingBar Evo Crossbars - Aluminum - Black -53"...
  view full answer...
• Need Replacement Pads for Yakima Baseclip 130.
  We do carry the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06130 this is the clip and the contact pad for the Yakima roof rack systems and will come with two 130 clips and the appropriate pads. I do not have them available seperately.
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
  The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
  view full answer...
• Components Needed To Mount Yakima RoundBars On A 2024 Kia Seltos With A Naked Roof
  Hey Jason, Yes, you can get the Yakima BaseLine Roof Rack for Naked Roofs # Y64PJ without the crossbars, you'll just need to order each component separately: BaseLine Towers for Yakima Crossbars # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06130 (front clips) BaseClip Fit Kit # Y06132 (rear clips) If you need anything else or if you have factory rails let me know.
  view full answer...
• Will the Thule Hullavator Fit on Yakima Jetstream Crossbars on a 2021 Toyota Highlander
  The Thule Hullavator # TH898 will fit on the Yakima Jetstream bars without any issues and I do recommend going with the 60" bars just to ensure that you've got the needed clearance to use the Hullavator's lift assist system. If you've got a naked roof you'll want the Yakima roof rack system that uses parts # Y00426, # Y28TR, # Y06153 and # Y06132. If you've got the flush mounted rails you'll want to use # Y00426 for the bars still but use the # Y53TR and # Y66VR for the towers and landing...
  view full answer...
• Recommended Roof Rack For A 2021 Kia Seltos With A Naked Roof
  Yes there is, so for your 2021 Kia Seltos I recommend taking a look at the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 & # Y06132. The great part about this rack, apart from the 165-lbs weight capacity, is that it will also work great with naked roofs like what's on your 2021 Kia Seltos by using the DropHook clip holder. I have also included an installation video on...
  view full answer...
• Comparing Yakima Baseline and Skyline Towers on 2015 Mazda CX-5
  When comparing the height of each option, the lowest Yakima Roof Rack for your vehicle consists of the Yakima RoundBar SL Adapter # Y03536 to utilize your previous Yakima round bars, the BaseLine Towers # Y28TR, the BaseClip Fit Kit # Y06130 and # Y06132. Overall this system will be about an inch shorter than the Skyline tower and base option.
  view full answer...
• Will the Thule Force XT XL Rooftop Cargo Box Fit a 2021 Toyota Highlander
  In order to use a cargo box on a 2021 Toyota Highlander you'll first need a roof rack like the Yakima JetStream Crossbar System composed of part # Y00426, part # Y28TR, part # Y06153, and part # Y06132. This will then allow you to mount a cargo box like the Thule Force XT XL Rooftop Cargo Box part # TH6358B. The Force XT XL will be a great size for the Highlander. This is a larger SUV so you can get away with a larger box. It will indeed cover the moonroof but you wouldn't want to open...
  view full answer...
• Recommended Roof Rack and Kayak Carrier For 2022 Toyota Highlander With Bare Roof
  We sure do! For your 2022 Toyota Highlander I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars in Black # Y00426, Yakima Base Line Towers # Y28TR, BaseClip Fit Kit # Y06153, and BaseClip Fit Kit # Y06132. I do also recommend adding the Yakima Same Key System Lock Cores # Y07204 to the towers to keep them secured to the roof of your Highlander. This system will give you 60" of useable crossbar space with a 165lb weight capacity which will be perfect for a...
  view full answer...
• Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 Highlander
  It truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
  view full answer...
• Recommended Roof Rack For A 2022 Toyota Highlander XLE
  If your 2022 Toyota Highlander has flush mounted rails that run from the front to the back of the vehicle then I recommend the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541 Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR If...
  view full answer...
• How to Add Platform Rack to 2020 Toyota Highlander With Naked Roof
  While you can add a platform rack to your 2020 Toyota Highlander, I checked with our manufacturers and there isn't a direct-mount option for your vehicle. So the only option for your Highlander, assuming it does have a naked roof without flush rails, is to add a roof rack which you can then add the platform rack to. There is one option for this from Yakima, and I verified with them the correct parts for the rack, as well as the correct size of platform needed. The exact parts that will...
  view full answer...
• 2023 GMC Acadia Roof Rack and Cargo Box Recommendations
  The absolute best roof rack for your 2023 GMC Acadia with the bare roof is the Yakima BaseLine FX because it has a nice factory look but is also more robust so you get a great looking system that's also stronger. Here are the parts you'll need: - BaseLine FX Crossbars # Y59UV - Fit Kits # Y06138 and # Y06132 - Lock Core Kit # Y07204 (optional) If you were planning on using this for a cargo box then I highly recommend the Yakima SkyBox NX 18 # Y45AV. I really like this box because it...
  view full answer...
• Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top Tent
  I would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
  view full answer...
• How to Use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with Bare Roof It does not have
  In order to use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with bare roof you'll need the following: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 part # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06153 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06132
  view full answer...
• Does Thule Offer a Roof Rack for a 2021 Toyota Highlander
  I do have an option for you but there are currently no Thule roof rack fits for a 2021 Toyota Highlander. Instead, the best option at this time would be the Yakima CoreBar Crossbar System which consists of part # Y00422, part # Y28TR, part # Y06153, and part # Y06132. This system uses aero bars which create less wind noise and have a greater range of compatibility with rooftop mounted accessories.
  view full answer...
• SportRack Vista XL Opening Cargo Box Compatibility With A 2020 Toyota Highlander
  Crossbar spread is normally measured from center to center of the crossbars themselves. The SportRack Vista XL Cargo Box # SR7018 can fit a crossbar spread of 23-5/8", 25-7/8", 27-7/8", or 29-7/8" so you'll definitely be able to get it to fit on your 2020 Toyota Highlander. If you don't already have a roof rack system on your Highlander then I recommend the 2020 Toyota Highlander Roof Rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60"...
  view full answer...
• Roof Rack for 2020 Toyota Highlander to Carry Thule Motion XT XL Cargo Box
  Yes, the Thule Motion XT Roof Cargo Box part # TH629806 that you referenced does fit the Yakima Jetstream roof rack that is a confirmed fit for your 2020 Toyota Highlander with flush mounted roof rails: JetStream Crossbars # Y00426 BaseLine Towers for Yakima Crossbars # Y00146 Landing Pad 28 # Y06153 Landing Pad # Y06132
  view full answer...
• Roof Rack Recommendation for 2021 Toyota Highlander with Naked Roof
  Hey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
  view full answer...
• What Roof Rack do You Recommend for My 2021 Toyota Highlander?
  I have a great roof rack for you. Unfortunately, I confirmed with Thule that they do not have a roof rack system engineered to fit your 2021 Toyota Highlander XLT whether you have a bare roof or flush factory rails. However, we do have a similar Yakima system available. If you have a bare roof Highlander, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 60" # Y00426 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit for...
  view full answer...
• Recommended Roof Rack for a 2023 Ford Explorer With a Naked Roof
  The Yakima BaseLine FX Roof Rack for Naked Roofs # Y99UV you're looking at will work just fine with your naked roof on your 2023 Ford Explorer. To complete this setup you are going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06154 & # Y06132.
  view full answer...
• 2019 GMC Acadia Roof Rack and Kayak Carrier Recommendations for 2 Kayaks
  The Yakima JetStream roof rack system is a great option for the naked roof on your 2019 GMC Acadia: 50" JetStream Crossbars - # Y00425 BaseLine Towers - # Y28TR BaseClip Fit Kit - Kit # Y06138 and Kit # Y06132 Lock Core Kit - # Y07204 (optional) The note about not carrying something side-by-side actually just refers to surf/sail/paddleboards and doesn't apply to kayaks. If you don't already have a kayak carrier I really like the Yakima JayLow # Y04073 which comes with tie-downs for 1...
  view full answer...
• Recommendation for Roof Rack and Roof Mounted Bike Rack on a 2016 Mazda CX-5 with a Naked Roof
  I can help you get a roof rack system and bike rack for your 2015 Mazda CX-5. The Yakima rack that I would recommend for you is made up of the following parts: # Y00422 - 60 inch Corebar Crossbars # Y28TR - BaseLine Towers # Y06130 - BaseClip fit kit # Y06132 - BaseClip fit kit Since your roof is a naked style you will need the use of the fit kit clamps featured in the above listed setup. One of the reasons Yakima may have been unclear about if the Qtower would work or not is because...
  view full answer...
  
• What Roof Rack do You Recommend for My 2014 Mazda 6 with a Sunroof?
  Yes! You can definitely install this roof rack to your 2014 Mazda 6 with a sunroof: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06132 - Yakima Same-Key Lock Cores # Y07204 Although, it is important to make sure you have enough height on the roof rack for the sunroof to operate. While...
  view full answer...

Do you have a question about this Roof Rack?