Timbren Trailer Axles
- A35RS545E
Highlights
- 3,500-lb Capacity: Supports single- or tandem-axle trailers for solid weight handling.
- Independent Axle-Less Design: Removes the beam axle for more ground clearance and smoother towing.
- AEON Rubber Springs: Soak up bumps and prevent bounce or bottoming out on rough pavement.
- E-Z Lube Spindles: Simple grease-zerk access keeps bearings maintained without teardown.
- 5 on 4-1/2" Hubs with Electric Brakes: Ready-to-run setup for safe, controlled stops.
- Fits Any Frame Width: Bolts directly to your trailer frame for flexible, universal mounting.
Features to know about
Smooth Ride Without the Bounce: Rubber Spring Suspension Takes the Hit
Rough roads can shake a trailer to pieces, but this system smooths it all out. The AEON rubber jounce and rebound springs absorb shock and control body roll, minimizing bounce, rattle, and bottoming out. Each side works independently, so when one wheel hits a pothole, the other stays planted. It feels stable and quiet, whether the trailer’s fully loaded or empty.
More Clearance, Same Deck Height: No Axle Beam Below the Frame
A traditional axle always hangs low, but this setup eliminates the thru-axle entirely. The standard-height spindles keep your deck height the same while giving you extra ground clearance to protect plumbing and underbody gear. The design fits any trailer frame width, so it’s easy to adapt—just bolt the two units directly to the frame and go.
Simple Maintenance That Lasts: E-Z Lube Spindles and Replaceable Bearings
Keeping bearings greased shouldn’t be a chore. The built-in E-Z Lube spindle lets you pump in grease through the zerk fitting without needing to pull everything apart. Each hub comes pre-fitted with inner bearing L68149, outer bearing L44649, races L68111 and L44610, and a 10-19 seal. When it’s time to service them, everything is easy to access and replace.
Confident Braking and Strong Steel Build: Electric Brakes with 5 on 4-1/2" Hubs
Integrated electric brakes help you stop smoothly and safely on every trip. The 5 on 4-1/2" hub pattern matches common wheel setups, and the 3,500-lb total weight capacity is solid for single or tandem-axle use. Heavy-duty steel construction with black powder coat resists rust and corrosion, so it stays tough mile after mile.



Specs
Application
- Application: single- and tandem-axle trailers that use regular tires
- Tandem-axle trailers: require 2 complete systems
- Not recommended for: triple-axle trailers
Quantity and Capacity
- Quantity: 2 suspension units (with hubs and electric brakes)
- Weight capacity: 3,500 lbs
Bolt Pattern and Hardware
- Bolt pattern: 5 on 4-1/2"
- Bolt hole diameter: 1/2"
Suspension Specifications
- Suspension travel: 1-3/4"
- Warranty: 3-Year limited warranty

- jounce spring: supports the weight of your trailer and cargo. It easily absorbs road shock and is constructed of AEON heavy-duty, hollow rubber.
- rebound spring: delivers a smooth, stable ride - regardless of how much cargo is on the trailer. It controls the movement of the jounce spring to minimize trailer body roll, bounce, rattle, and bottoming out.
- trailing arm with integrated hanger: attaches the suspension to the side and bottom of the trailer frame.
- control arm: carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication.
- E-Z Lube spindle: is simple to grease. If damaged, it can be removed and replaced, saving you both time and money compared to a traditional axle.
- built-in hole: accepts 2" x 2" steel tubing (not included) to add support to your trailer's frame. The tubing sits higher than a trailer axle, providing additional ground clearance.
Tire, Wheel, and Hub Compatibility
- Tire size: 235/85R16 or smaller
- Wheel diameter: 16" or smaller
Bearings (Included)
- Inner bearing: L68149
- Outer bearing: L44649
Races (Included)
- Inner race: L68111
- Outer race: L44610
Seal (Included)
- Seal number: 10-19
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Dimensions
- A: 13"
- B: 15"
- C: 1"
- D: 5"
- E: 3-13/16"
- F: 4-1/4"
- G: 5-5/8"
- H: 6"
- I: 4-3/4"
- J: 1-3/4"
- K: 3-3/8"
- L: 3-11/16"

Note
- This Axle-Less system requires crossbeam support. If your trailer frame doesn't have a crossmember in place, you can retrofit it with one, or you can add a support by running a piece of 2" x 2" steel tubing through the square holes cut into these units. You could also add a steel reinforcement bracket to the inside of the trailer frame.
ASR3500S045 Axleless Trailer Suspension System by Timbren - Standard Height Spindle - 5 on 4-1/2" - Electric Brakes - 3,500 lbs
94545LH and 94545RH Electric Brake Hubs and Drums for 3,500-lb Axles - 1/2" Studs - Right Hand and Left Hand
Heather A.
4/11/2026
That is such a cool T@B, those little teardrops have that classic retro look that never gets old. I didn’t even realize you could take trailers on ferries like that, that’s awesome. This thing has seriously been everywhere. And great job on the install too, that’s no small upgrade. Out of all those trips, what’s been your favorite stop?