See what our Experts say about this Yakima Roof Rack

• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• Economically Priced Roof Rack Recommendation for 2019 Toyota Camry with Naked Roof
  While we do have roof racks that fit your 2019 Toyota Camry with a naked roof the Rola you mentioned is not a fit as it fits Honda Civics. Instead the most economically priced rack we have that does fit your vehicle is the Yakima BaseLine roof rack part numbers # Y00408, # Y28TR, # Y03536, and # Y06192. At this time (June 2019) there aren't any Rola roof racks that fit your vehicle.
  view full answer...
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• Will the Yakima 1A Raingutter Towers Work with the Kwik-Rail Mounting Brackets # Y08002?
  From the looks of your photo, you have the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. I confirmed with my tech at Yakima that the Yakima 1A Raingutter Towers (QTY 4) # Y00101 fit these Kwik-Rail mounts. For theft-deterrence, I recommend the Yakima Same-Key Lock Cores # Y07204. If you need Yakima RoundBars to go with the towers and the brackets, I recommend one of the following crossbar sets: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - Round...
  view full answer...
  
• What Crossbar System Do You Recommend For a Rooftop Tent on My 2021 Subaru Forester?
  For a crossbar system that will be able to accommodate a roof top tent on your 2021 Subaru Forester, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR - (optional for theft-deterrence) Yakima Same-Key Lock Cores # Y07204 With this Yakima crossbar systems, you will be able to accommodate a rooftop tent up to a maximum static weight capacity of 600 pounds. If the...
  view full answer...
• Removing Yakima BaseLine Roof Rack System From 2016 Honda Civic
  While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process. This will require the tightening tool that was included with your BaseLine Towers, but if you do not have the tool you can use a long 4mm Hex Wrench. First you are going to want to remove the end cap from the tower, if you have the Yakima SKS lock cores # Y07204 you will need to unlock the cores, or if you have...
  view full answer...
  
• Can I Mount the Side Loader Mounting Brackets item # Y08002 on a Vertical Surface?
  Yes, they can Eric. The Side Loader Mounting Brackets item # Y08002 are designed to recreate rain gutters like you see on cargo vans. They do not require a specific angle to be functional. What you will want to look at is where you can mount them, and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. These are sold as a pair. Here are the rest of the parts you'll need to complete the roof rack: 1A Raingutter...
  view full answer...
• What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
  If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. For the tracks themselves, they come in 3 different sizes: - Yakima 42" Tracks for Roof Racks # Y01126 - Yakima 54" Tracks for Roof Racks # Y26RR - Yakima 60" Tracks for Roof Racks # Y01135 Since most truck...
  view full answer...
• Parts Needed To Install 60" JetStream Bars On A 2021 Toyota Tacoma Double Cab With Factory Rails
  We can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426.
  view full answer...
• Loadstop Compatibility With Yakima CoreBar And Universal Mighty Mounts
  Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
  view full answer...
• Yakima Roof Rack that Fits Leer Truck Topper Tracks
  We have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
  view full answer...
• Do I Need an Adapter to Mount the Thule Motion XT XL # TH629807 to Yakima RoundBars?
  Nope! In order to use the Thule Motion XT XL Rooftop Cargo Box - 18 cu ft - Titan Glossy # TH629807, you do not need to use any adapter in order to clamp the box onto Yakima RoundBars like the 48" # Y00408. Since you are inquiring about RoundBars, I assume your 2014 Subaru Forester has raised factory rails. If that is the case, you also need the additional components to mount the RoundBars: - TimberLine Towers for Yakima Crossbars # Y33TR - RoundBar SL Adapter for Yakima BaseLine, SkyLine,...
  view full answer...
  
• Yakima Roof Rack that Fits Roof Tracks on Leer Truck Canopy
  I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your Leer camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
  view full answer...
• Roof Rack Solution for Truck Topper Using Artificial Rain Gutters
  The components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets # Y08002. The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers # Y00101, which come in a quantity of 4. These towers are designed for use with the Yakima RoundBar crossbars. Yakima crossbars come in a variety of lengths. Depending on how much overhang of the crossbar you want, the Round 58 Inch Crossbars for Yakima Roof Rack Systems...
  view full answer...
  
• Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks
  I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your ARE camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the width of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411
  view full answer...
• Recommendation for Installing Yakima Roof Rack on Leer Cap with Thule Tracks
  You can indeed install a Yakima roof rack system on your Leer cap that features the Thule tracks. You will need to start with two of the Landing Pad 1 # Y00221, which are the pieces that will mount to the tracks to provide an attachment point for the towers. Then from there you will need 4 of the Control Towers # Y8890027. Then it is just a matter of selecting the crossbar length you are wanting. These are available in 48 inch # Y00408, 58 inch # Y00409, 66 inch # Y00410, and 78 inch...
  view full answer...
• Alternate Mounting Hardware for Yakima SpaceBooster Cargo Box on 2015 Subaru Outback Wagon
  It is not a huge deal to add a few new mounting holes to the bottom of an ABS plastic cargo box like the Yakima SpaceBooster. A cordless drill and appropriately-sized drill bit will make short work of it. I would avoid using a heated implement for making the holes since it could be a bit messy and could make it harder to control the size of the hole. The things to keep in mind are that you want to drill no more additional holes than absolutely necessary so measure, check and re-check....
  view full answer...
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?
  The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
  view full answer...
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?
  I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
  view full answer...
• Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
  To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
  view full answer...
  
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
  Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
  view full answer...
• Roof Rack Option For A 2016 Lexus GX460 With Factory Flush Rails
  Good morning, Doug. I do have a potential solution for you, but I am sorry to say that Thule does not make a fit kit for the 2016 Lexus GX460. So, there is unfortunately no way to mount your Thule Evo bars on this vehicle. Our best option would be to get a whole new roof rack. Yakima does make a fit kit for the 2016 GX460 flush rails, so one of their JetStream racks would be a great option that is comparable to Thule. The complete Yakima roof rack consists of the following parts: - Yakima...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• How to Carry the Yakima MajorShady 270 Awning on a 2024 Subaru Outback Wagon
  The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system. For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each: Malone...
  view full answer...
• Installation of Yakima Roof Rack on 2019 Jeep Grand Cherokee With Flush Mount Rails
  Assuming your 2019 Jeep Grand Cherokee has the black and chrome flush-mounted rails that run front to back, you are correct that the roof racks you mentioned do install into the same place the factory bolts are. I have added links to an installation video of the Yakima JetStream roof rack on a Jeep Grand Cherokee with flush mount rails so you can see exactly how the rack installs. The Yakima JetStream (which is shown in the accompanying photo installed on a Jeep Grand Cherokee) consists...
  view full answer...
  
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Roof Rack With Black Crossbars for Pace Edwards BedLocker Rails on 2019 Ford F-350
  Hi Michael; you can use the same fit kit # THKIT3101 and mounting feet # TH460R. However, the longest WingBar Evo is 60" # TH711520 which probably won't be long enough for your truck bed. That is why Conner originally chose the # TH713700 which are 79" long. For bars that are black I recommend switching to a Yakima setup. You will need the following: -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -SkyLine Towers for Yakima Crossbars # Y53TR -Yakima CoreBar Crossbars -...
  view full answer...
• 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush Rails
  I'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
  view full answer...
• Roof Rack for 2019 Subaru Outback with Rails to Carry Hullavator and Hull-a-Port
  The 47 inch bar would definitely not work for two Hullavators; thanks for calling that to our attention and that information has been edited. You would need crossbars that are a minimum of 76 inches for a pair of Hullavators.
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
  Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
  view full answer...
• Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
  Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
  view full answer...
• Best Roof Rack for 2020 Kia Soul with Fixed Mounting Points
  The best roof rack for your 2020 Kia Soul with a naked roof (fixed mounting points) is from Yakima because it will give your Kia a roof rack that combines effectiveness and style while minimizing any wind noise that can occur with lesser roof racks. This roof rack is made up of: - Yakima JetStream Crossbars # Y00425 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack will look stellar atop your 2020 Kia...
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Will Malone SteelTop Roof Rack Fit 2025 Subaru Outback
  Hi John; is your 2025 Outback the Wilderness model? The Malone SteelTop Roof Rack # MPG203 only fits the rails on the Wilderness. This will not fit the factory rails on the regular Outback models. If that is what you have, let me know in the comments below and I can see what else is available. Are you looking for a specific crossbar length?
  view full answer...
• Yakima Roof Rack Parts for 2018 Subaru WRX
  Yes, the Yakima roof rack you mentioned that consists of part numbers # Y00425, # Y53TR, and # Y00233 is a confirmed fit for the roof of your 2018 Subaru WRX and would be a great option. This would then be compatible with the Yakima Forklift part # Y02098 that you mentioned.
  view full answer...
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Towers for Yakima RoundBar on 2024 Honda CR-V Hybrid
  There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR If you have Yakima Same Key System locks you can transfer them over or you can add new locks using...
  view full answer...
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• How to Carry Two Canoes on Roof of 2019 Honda Passport with Factory Crossbars
  Your best option is to use the Thule Compass Watersport Carrier # TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport. It can easily accommodate your two canoes, as long as their combined weight is not over 130 lbs, and they are not more than 36 inches wide (at their widest point). The Compass will allow you to carry your two canoes in a vertical (post-style) position so you have one on each...
  view full answer...
  
• Does Malone Square Bar Roof Rack # MPG203 Fit 2019 Toyota 4Runner
  Yes the Malone SteelTop roof rack part number # MPG203 would fit and work great on the roof of your 2019 Toyota 4Runner with raised rails.
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Recommended Thule Aeroblade Roof Rack Recommendation for 2018 Toyota Tacoma
  47 inch long Thule aero bars would be too short to be used on your 2018 Toyota Tacoma. Thule recommends a 53 inch bar like the part # TH711400 with the feet part # TH710501 and the fit kit # TH145107.
  view full answer...
• Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
  The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Yakima Round Bar Roof Rack Components to Install Round Bars 2015 Toyota Sienna
  Hey Jim, the best alternative to the mounting hardware you have now would be the current Yakima roof rack components that they list for installing the round bars on your 2015 Toyota Sienna which is their Timberline kit that consists of part numbers # Y33TR and # Y03536. How do you like the longer crossbars?
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
  While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• Recommended Roof Rack to Carry 2 Kayaks on 2014 Ford Focus
  We carry many roof rack and kayak carrier options for your 2014 Ford Focus. The roof rack that I recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06135 and # Y06105. This will provide you with two crossbars to mount your kayak carrier to. You can mount your kayak directly to the crossbars, but to prevent scratching your kayak, I recommend using kayak carriers like the Yakima...
  view full answer...
• Parts Needed to Install Round Yakima Crossbar Roof Rack on 2020 Toyota Highlander
  Hey Michael, it sounds like you have a set of round Yakima crossbars (among other things) that you'd like to reuse on your 2020 Toyota Highlander that has factory fixed mounting points. For that the complete rack with everything including the bars would normally be the part # Y63FB but since you have the bars already what you'd want is the part numbers # Y53TR, # Y46VR, and # Y03536 which is everything you'd need minus crossbars. If you have a different setup currently let me know and...
  view full answer...
• Economically Priced Roof Rack Recommendation for 2019 Toyota Camry with Naked Roof
  While we do have roof racks that fit your 2019 Toyota Camry with a naked roof the Rola you mentioned is not a fit as it fits Honda Civics. Instead the most economically priced rack we have that does fit your vehicle is the Yakima BaseLine roof rack part numbers # Y00408, # Y28TR, # Y03536, and # Y06192. At this time (June 2019) there aren't any Rola roof racks that fit your vehicle.
  view full answer...
• Yakima Round Bar Roof Rack that Fits 2010 Toyota Highlander
  That's an older Yakima roof rack than we have replacement towers for. It looks like your buddy ruined the lock assemblies and there wouldn't be a way to replace the lock setup. What vehicle do you have? I can look into what the correct Yakima round bar rack is and see if there's a way to reuse at least the bars.
  view full answer...
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• Roof Rack that Fits 2019 Hyundai Santa Fe SEL with Naked Roof
  Yakima has their BaseLine roof rack part numbers # Y06151, # Y06154, # Y00409, # Y28TR, and # Y03536 as a confirmed fit for your 2019 Hyundai Santa Fe with a totally naked roof. This will give you a round crossbar roof rack that will be compatible with most roof rack accessories.
  view full answer...
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra Groove
  I believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
  view full answer...
• Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack Tracks
  Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
  view full answer...
• Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track System
  The Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
  view full answer...
• Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory Rails
  For your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
  view full answer...
• Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control Towers
  If the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
  view full answer...
• Roof Rack Recommendation for a 2008 Hummer H3 with Factory Tracks
  For a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
  view full answer...
• Replacement Yakima Landing Pad For Roof Rack Tower
  The landing pad you have is either going to be in the kit Landing Pad 1 # Y00221 or Landing Pad 4 # Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut.
  view full answer...
• Roof Rack for 2007 Hummer H3 with Roof Rack Channels
  For your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
  view full answer...
• Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3
  If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
  view full answer...
• Roof Rack Recommendation for 2005 Chrysler Town and Country Van
  Your 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
  view full answer...
• Roof Rack Recommendation for 2009 Hummer H2
  For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
  view full answer...
• How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2
  To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
  view full answer...
• Roof Rack Fits for 2003 Chevrolet Suburban
  The current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
  view full answer...
• Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding Doors
  When installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
  view full answer...
• Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge Caravan
  To carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
  view full answer...
• Recommended Bike Carrier for Hummer H3
  The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
  view full answer...
• Recommended Roof Rack and Mud Flaps for 2007 Hummer H3
  For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
  view full answer...
• Recommended Roof Rack for a 2012 Land Rover Range Rover Sport
  The roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
  view full answer...
• What is the Difference Between Yakima Landing Pads 1 and 4
  The difference between Landing Pad 1 # Y00221 and Landing Pad 4 # Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different vehicles.
  view full answer...
• How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3
  Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
  view full answer...
  
• Parts Needed to Use a Yakima OverHaul HD Ladder Rack and Roof Rack with a Pace Edwards Ultra Groove
  I believe that I know what you are wanting to do. You are wanting the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5855 which fits your Sierra and is compatible with your Pace Edwards Ultra Groove tonneau cover. This provides you with a ladder rack that uses Yakima HD bars. Then you also want to use the HD bars on roof rack towers to provide a lower rack using the t-slots in your Ultra Groove Rails. In that case, the Landing Pad 4 for Yakima SkyLine and...
  view full answer...
• Will Yakima Landing Pad 1 and 4 Fit Rhino-Rack RTC-Style Roof Rack Tracks
  Yes, I test fit the Rhino-Rack RTC-Style Roof Rack Tracks # RTC12JW with the Landing Pad 1 # Y00221 and the Landing Pad 4 # Y00224 and found that they are compatible with each other. All of these parts come in a quantity of 2. To complete your setup you also need 4 of the Yakima Control Tower # Y8890027 and a set of round bars that match your application. We have a variety of round bar lengths for you to choose from. These include the following: 48" Round Bars - # Y00408 58" Round Bars...
  view full answer...
• Recommended Yakima Roof Rack for 2007 Land Rover LR3 with Factory Track System
  The Thule Fit Kit # THKIT3112 is the confirmed fit for your 2007 Land Rover LR3. Since they do not fit in the way you desire, I recommend the Yakima Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224 ( you will need 2 kits), the Skyline towers # Y53TR and the Jetstream Crossbars # Y00425. I also recommend the locks to secure your roof rack # Y07204. This system will mount differently into your factory rails for a confirmed fit.
  view full answer...
• Recommended Crossbars and Roof Basket for a 2008 Hummer H3 With Factory Rails
  For your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket # Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars # Y01156, measures 74" long x 48" wide x 6-1/2" tall, and has a maximum weight capacity of 130-lbs. To finish the crossbar setup, you'll also need the SkyLine Towers for Yakima Crossbars # Y53TR, HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers #...
  view full answer...
• Landing Pads For Rails Of A Carry On Utility Trailer For Yakima Control Towers
  If the rails you are referring to on your utility trailer are the track style, then your Yakima Control Towers will fit with Landing Pad 4 for Yakima Control Towers - Qty 2 # Y00224. If you will me drilling into metal support rails then you will want the Landing Pad 7 for Yakima Control Towers for Metal Roofs - Qty 2 # Y00227. You may also be interested in the Round 78" CrossBars for Yakima Roof Rack System (QTY 2) # Y00411 or the Round 86" CrossBars for Yakima Roof-Rack System (QTY 2)...
  view full answer...
• Roof Rack Recommendation for a 2008 Hummer H3 with Factory Tracks
  For a roof rack that is confirmed to fit the tracks on your 2008 Hummer H3 you would want the Yakima part numbers # Y00408, # Y53TR, # Y03536, and # Y00224. You can also lock this rack with the lock core set part # Y07204 which would help prevent theft. Sorry to hear about your factory rack getting stolen.
  view full answer...
• Replacement Yakima Landing Pad For Roof Rack Tower
  The landing pad you have is either going to be in the kit Landing Pad 1 # Y00221 or Landing Pad 4 # Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut.
  view full answer...
• Roof Rack for 2007 Hummer H3 with Roof Rack Channels
  For your 2007 Hummer H3 with the roof tracks like you pointed out we have the Yakima Skyline roof rack part numbers # Y00425, # Y53TR, and # Y00224 as a confirmed fit. This attaches to the slots you have and gives you a high quality rack that due to it's bar shape will be very aerodynamic.
  view full answer...
• Parts Needed to Carry Spare Wheel on Roof of 2008 Hummer H3
  If you installed a Yakima roof cargo basket like the # Y07070 you could use the Spare Tire Carrier part # Y07076 to carry the spare on your roof. You would need a roof rack installed on your 2008 Hummer H3 as well like the Yakima round bar roof rack part # Y00408, # Y53TR, # Y03536, and # Y00224. We don't have a good solution to cover where the old spare was installed. If you make it near St. Louis MO we could help out with the install too!
  view full answer...
• Roof Rack Recommendation for 2005 Chrysler Town and Country Van
  Your 2005 Chrysler Town and Country van could be equipped with three possible roof configurations (factory tracks, raised side rails or nothing at all). From your description is sounds like you have the factory tracks. For this roof style we have rack options that can be seen on the link provided. A cost-effective basic round bar system is offered from Yakima and consists of parts # Y00408, # Y00224, # Y53TR and # Y03536. Round bars offer excellent compatibility with accessories like bike...
  view full answer...
• Roof Rack Recommendation for 2009 Hummer H2
  For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
  view full answer...
• How to Install Rhino-Rack Pioneer Platform Rack on a 2003 Hummer H2
  To install a platform rack on your 2003 Hummer H2 we first need a roof rack and for that I recommend the Yakima JetStream system that includes the following parts: - 60" JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 4 # Y00224 This installs directly to the fixed mounting points on your Hummer which then allows you to use the Rhino-Rack Pioneer Platform Tray # RR82TB along with 2 of the Mounting Kit # RR43105 to get it installed. The Pioneer Platform # RR85ZW...
  view full answer...
• Roof Rack Fits for 2003 Chevrolet Suburban
  The current Yakima round bar roof rack that fits your 2002 Dodge Grand Caravan consists of parts # Y00408, # Y53TR, # Y03536 and # Y00224. All roof rack fits for the 2003 Suburban are shown on the linked page but no Yakima branded racks are among them. You can select your roof type using the drop-down menu tool at the top of the page to see roof racks that will work on your 2003 Suburban. If you have factory roof tracks then a cost-effective square bar rack confirmed to fit is the Inno...
  view full answer...
• Roof Rack Spacing On Roof Of 2006 Dodge Caravan With Sliding Doors
  When installing the Yakima roof rack on your 2006 Dodge Caravan with the sliding doors, the location of the feet and bars is not something that can be adjusted for each load. They are designed for a specific location so you would need to use other accessories like a roof basket for your specific load to give further support. To order the roof rack custom made for your Caravan, you will need part # Y00425, # Y53TR, and part # Y00224. I have attached a product review video for this roof...
  view full answer...
• Parts Needed to Carry the Thule Roof Mounted Cargo Basket # TH859XT on a 2005 Dodge Caravan
  To carry the Thule Canyon XT Roof Mounted Cargo Basket # TH859XT on your 2005 Dodge Caravan you will just need a roof rack (if you don't already have one). The Thule basket is compatible with round, square, aero, elliptical, and most factory crossbars. Should you have the factory installed tracks that front to back I recommend the Yakima roof rack which consists of their JetStream Crossbars # Y00425, the SkyLine Towers # Y53TR, and the Landing Pad 4 # Y00224. For a 2005 Caravan that has...
  view full answer...
• Recommended Bike Carrier for Hummer H3
  The Swagman Pick-Up Truck-Bed-Mounted Bike Carrier is designed for pick up truck beds, so it is not a fit for your Hummer H3. However, I do have several bike carrier options for your Hummer. Our most popular bike rack for the Hummer H3 is the Swagman Original # S64400 4 Bike Rack for 2" Hitches. I have linked to a video review of the bike rack for you to check out. I have also linked you to a FAQ article that shows how to measure the distance between your hitch pin hole and the furthest...
  view full answer...
• Recommended Roof Rack and Mud Flaps for 2007 Hummer H3
  For your 2007 Hummer H3, I recommend the Yakima JetStream Roof Rack, which consists of parts # Y00425, # Y00148 and # Y00224. This rack features two 50 inch, aerodynamic crossbars with a weight capacity of 165 pounds. They have a lightweight, durable and rustproof aluminum construction that will be perfect for your particular driving conditions. The asymmetrical shape will provide an extremely low profile and quiet system when installed on your Hummer. The SkyLine Towers will attach to...
  view full answer...
• Recommended Roof Rack for a 2012 Land Rover Range Rover Sport
  The roof rack I recommend for a 2012 Land Rover Range Rover Sport will be dependent on roof configuration. If you have a bare roof then I recommend the Thule WingBar Evo Crossbar System part # TH711520, part # TH710501, and part # TH145116. If you have factory installed tracks then I recommend the Yakima Jetsream Crossbar System part # Y00426, part # Y53TR, and part # Y00224. These are both excellent top-of-the-line options.
  view full answer...

Do you have a question about this Roof Rack?