Don't Miss These Holiday Savings!
Heavy-duty and lightweight trailer lets you haul heavy kayaks or canoes. Padded bunks protect your boat and hold it securely in place. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long. Spare tire included.
Features:
Specs:
Coupler Specs:
Tire and Wheel Specs:
This lightweight and low-profile trailer with padded bunks lets you transport your favorite kayaks or canoes. Because of the trailer's low-profile design, the crossbars sit only 22" off the ground. The lower crossbars provide a safe height to load heavy kayaks and help avoid unnecessary overhead lifting.
With a 7-1/2' tongue, this trailer offers exceptional clearance during tight turns. The extended tongue also makes it easier to back up the trailer and prevent binding than trailers with shorter tongues.
Heavy-duty bunks stabilize your boat and prevent movement while traveling on uneven or rough terrain. They can be adjusted to accomdate different size hulls and eliminate boat-to-boat contact. The bunks durable padding prevents scuffs, scratches, or damage to your boat during transport. To prevent mold or mildew, the bunks have weather-resistant covers to repel moisture and water.
The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs.
The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness.
Run the wires of the tail light harness along the sides of the trailer frame and plug the individual wires into the matching wires on the side marker lights and the tail lights. The wires are color-coded so that you can easily match them up - no circuit tester is required. Once all of the wires are plugged in, use the included clips to secure the harness to the frame.
When you're ready to connect the trailer to your vehicle, simply plug the trailer end of the main harness into the 4-way flat connector on your vehicle.
This trailer includes a leaf spring suspension system to limit road shock while you tow. A sturdy steel axle runs beneath the trailer frame. The 2 slipper springs that support the axle flex to absorb the rough motion that can occur when driving over bumpy terrain. Also, the axle, spring hangers, and tie plate are galvanized to resist rust and corrosion.
Hooking this trailer to your vehicle is quick and easy. The trailer's coupler connects to a 2" hitch ball, and the included safety chains act as an emergency measure if the coupler accidentally disconnects from your hitch ball. A rubber coated lift handle is mounted to the coupler to provide a solid grip for lifting or maneuvering the trailer. Finally, the skid plate on the underside of the trailer tongue keeps the coupler from touching the ground.
Average Customer Rating: 4.8 out of 5 stars (79 Customer Reviews)
Heavy-duty and lightweight trailer lets you haul heavy kayaks or canoes. Padded bunks protect your boat and hold it securely in place. 13' Long marine-grade trailer with 12" wheels supports boats up to 20' long. Spare tire included.Always great service ! Any problems and they step up making things right. Highly recommend Etrailer
Nice trailer, easy to put together except it, being the low bed cane with directions for the high bed. But Etrailef send me the pdf for the low bed.
Bought the LowBed MicroSport specifically for my Blue Sky Boat Works Angler 360 kayak. Trailer works great! It's lower and makes getting the kayak on and off easier. Had no issues with the trailer assembly. LED lights work great. After one year I'm very happy I bought this trailer.
Well it finally came in over two months after ordering due to MFG back orders I have finally assembled the trailer and all my friends think it’s great. I have been roof top kayaking for many years but the constant loading unloading and reloading and unloading back home was starting to make me loose my joy of kayaking. Now with this trailer I hope to keep kayaking into my 90’s. And no back pain.
In a few words, "I Love It"
: Didn't work out at all considering with the j-hooks installed the trailer is way too deep to hug a wall, so I store the trailer outside with a tarp over it. If you have to store the trailer with the tongue retracted, this is a must have.
We have used and enjoyed the kayak trailer for about a year. It is a pleasure to arrive home from a kayak trip and I just unhook the trailer and back it into the garage. No more have to lift the kayaks on and off the top of the pickup. During winter I remove the support bars, and tongue to set the trailer up on end against the wall. The only issue has been the wing nuts on kayak holders. I could not tightened them so that the holders move during transport. To solve this issue I replaced the wing nuts with lock nuts. Also the bolt head slips during the tightening of the lock nuts. Other than that, we love the trailer.
Took my wife and I 4hrs to put it together. Instructions were accurate and easy to follow. Perfect fit for our two pedal drive kayaks 12ft And 14ft. Tip- using battery powered impact wrench would have made the process much faster. Very pleased with the results and thanks etrailer for another great shopping experience.
I researched a number of different trailer options for my pair of Hobie fishing kayaks. Due to their weight, proper support was crucial to prevent long term sagging. I liked the multiple options available with the Malone Microsport trailer and went with the twin bunk option.
The Microsport trailer is sturdy and easy to assemble. The instructions were detailed and easy to understand. I also took advantage of assembly video on the etrailer.com website. All this being said, I found the estimated 3 hour assembly time to be overly optimistic. (It took me about 5 hours.)
I like the fact that all of the parts are galvanized. Living in a rainy area and using the trailer to store the kayaks when not in use, rust prevention is important to me. I'm confident the trailer will last a long time.
I've already towed my kayaks over 100 miles to our vacation home without incident. The trailer towed like a dream. The LED lights are bright and easy to see from behind, even though the kayaks overhang the back of the trailer by at least 4 feet. I was not concerned about drivers behind me not being able to see my turn signals and break lights.
All in all, the Malone Microsport trailer is great, reasonably-priced trailer for kayaks and canoes. It also makes a great rack to store them on, if you have the space.
Great trailer to hold my large fishing kayaks. I am glad I went with this solution as I can permanently store my kayaks on the trailer under my lean to. The trailer took a while to build admittedly and I did have to run to the hardware store to grab a nut I was shorted and replace a metric carriage bolt with thread damage, but overall it is a solid product that drives well and I highly recommend.
A couple notes: The lighting kit is a 4 pin, so you may need to get an adapter if you have an older vehicle (mine had a 7 pin circle style plug only). Also, there is no space tire holder on the trailer like you see in the pictures so you will either have to throw it in your vehicle or acquire parts to attach it to the trailer.
Can't say enough about the quality and prices. Ashley and Bridgette in CS were extremely helpful in helping me get what I needed in a Kayak trailer, and their follow up was extraordinary. Malone trailer is very sturdy, assembly instructions were right on. Paper work for title and registration was sent to me asap after delivery of the trailer. Trailer tows and tracks very well.
Good quality trailer. Went together easy, had all the parts even though the main packaging was torn open from shippment. Got it licensed with no problems.
I will be hauling my 2019 Hobie Outback on this trailer. Also mounted a 6" tube for
my fishing poles. Will also be adding the storage box. Have not had it on the road
yet. I like the size of this trailer, not very heavy or to large.
This is a great trailer for the price.
I found the packaging and instructions pretty straightforward and easy to follow.
Once together it seems quite solid and I really like the LED lights.
The crew at etrailer.com were in constant contact and very supportive throughout the entire process and all the paperwork for registration came within a week .
Due to the pandemic, I waited 2 months to receive the trailer. It all arrived in good shape and I was able to assemble it easily. I was pleasantly surprised that the hardware and wiring harness had been upgraded to be more robust. I am waiting for plates and then I will see how it does on the road.
The search for a trailer to carry our two Hobie Kayaks was extensive. My main concern was finding one that could carry the two heavy (83 lbs. ea.), travel at highway speeds and be easy to use. This Malone MicroSport trailer has turned out to be great. It is easy to get our kayaks on and off the trailer at the lake. Rhino-rack Nautic roof rack carriers were installed to carry the kayaks because I wanted them to provide conforming support for the hulls. They have proven to be capable of carrying the weight of the Hobie kayaks and the kayaks can be slid on them when loading/off-loading. This was a primary concern because capacity is not listed with most carriers. Assembly of the trailer was fairly easy and I would rate it requiring moderate mechanical skill. Before doing this assembly I watched a fantastic video online, walking you through the assembly.
I would add just a couple things. Those include: 1. It would be easier to do most of the assembly on a table, until you get to the wheels. Especially true for us older folks that don't bend so well. 2. Be sure to read the wiring harness installation a few times before installation. It is tricky, but will work if you follow the instructions correctly. There is barely enough wire to connect the tail lights. I wound up having to splice some wire because of problems I had. 3. You will need to get some grommets to protect the wires going through the holes in the frame. They are not supplied with the kit. Other than that the trailer works great,very solid and have had no issues traveling at highway speeds. Attached is a photo of the trailer with the kayaks.
Trailer directions straight forward. All materials identifiable, quality made and on hand. Take your time to do it right. Taking on kayak trip this weekend!
Love this trailer! Works perfect for 1 to 4 kayaks. Easy to Tow! Used on multiple trips & is still working great! Purchased in 2021.
Excellent trailer for my two kayaks …nice not to have to lift kayaks onto top of car ….
I started building the trailer yesterday afternoon and just finished it an hour ago after spending three more hours on it today. It went together very well. Institutions were very clear. I am very happy with it. I am attaching a photo.
Excellent Instructions made assembly straightforward without miss-steps. In my case, 6 hours and assembled.
Was able to order the item when it was not in stock. Trailer was sent directly from Malone but without a proper bill of sale. Now I'm getting the run around and have a trailer that can't be registered.
Nice trailer... easy to assemble... reminded me of a full size Mysto Manufacturing Company Erector set from my childhood. Instructions were clear... everything made sense.
I cannot think where I was ever more impressed with a company than Monroe. They were very attentive and never was there a more easier task than building my trailer. There was nothing missing, and it went together with perfection. Not knowing, but a year before I bought the trailer package, I purchased a kayak 2 wheeled portage cart. Wanting a premier carrier, i bought the best , most stable built cart on the market. It so happens that it was a monroe cart as well. Great group of engineers working on innovation everyday.
Product was as advertised, however it was missing four bolts that I had to get at a hardware store, but other than that it was fine. Service from etrailer team was outstanding.
Do you have a question about this Kayak Trailer?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.