Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks

Question

Question:

I have a ARE truck cap that has the factory roof rack rails. I was told it would use Yakima parts. Looks like the rails have a Tinch slot maybe. What part fits in these rails?

asked by: Bob H

0

Expert Reply:

I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your ARE camper.

To complete your roof rack setup you will need:
quantity 2 of the Landing Pad 1 # Y00221
quantity 4 of the Control Towers # Y8890027
and depending on the width of your cap
quantity 2 Crossbars like:
48 inch # Y00408
58 inch # Y00409
66 inch # Y00410
78 inch # Y00411

expert reply by: Jameson C

0

Answer 1

The Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks #Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks #Y01126 or the Yakima 54" Tracks for Roof Racks #Y01127 both these tracks include the PlusNut…

view full answer...

Answer 2

You can add the Yakima Tracks for Roof Racks, which come in 60" #Y01135, 54" #Y01127 or 42" #Y01126 to your 2015 Ford F-150 although I could not tell from the photo if there was a space between the truck cap and the roof of your truck.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 6

Hey Trace, would a 55 inch crossbar length work? If so, the Yakima HD bar part #Y22BB would be what you will want. A longer bar isn't guaranteed to fit since the mounting channel on the bottom of the bar does not extend the entire length of the…

view full answer...

Answer 7

Hey Aaron, thanks for reaching out. Yes, there is a setup that does exactly what you are looking for. Since your 2022 Toyota Highlander L has the four factory fixed mounting points, you do not have to use a door-jamb clamp-style rack. I recommend the…

view full answer...

Answer 8

Hey Tom! Unfortunately, Thule didn't make a fit kit that will allow their roof racks to fit your 2019 Buick Envision. What I recommend is selling that roof rack and then replacing it with the Yakima SkyLine Roof Rack #Y77TB. Yakima JetStream bars…

view full answer...

Answer 9

Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part #Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter…

view full answer...

Parts Needed to Install Yakima Roof Rack in ARE Truck Camper Shell Tracks

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching